Streszczenie treści zawartej na stronie nr. 1
Camera User Guide
• Before use, be sure to read this guide, including the
safety precautions.
• This guide will familiarize you with how to use the
camera correctly.
• Keep the guide handy for future reference.
ENGLISH
C OP Y
Streszczenie treści zawartej na stronie nr. 2
Package Contents Before use, make sure the following items are included in the package. If anything is missing, contact your camera dealer. Camera Battery Pack NB-10L Battery Charger (with terminal cover) CB-2LC/CB-2LCE Interface Cable Neck Strap Lens Cap IFC-400PCU NS-DC9 (with cord) Getting Started DIGITAL CAMERA Warranty Card Solution Disk • A memory card is not included (see below). PDF Manuals For information about the included software, refer to the Software Guide, in PDF format (p. 26)
Streszczenie treści zawartej na stronie nr. 3
Preliminary Notes and Legal Information About Eye-Fi Cards This product is not guaranteed to support Eye-Fi card functions (including wireless transfer). In case of an issue with an Eye-Fi card, please check with the card manufacturer. Also note that an approval is required to use Eye-Fi cards in many countries or regions. Without approval, use of the card is not permitted. If it is unclear whether the card has been approved for use in the area, please check with the card manufacturer. • Al
Streszczenie treści zawartej na stronie nr. 4
Part Names and Conventions in This Guide Front dial Mode dial Lamp Exposure compensation dial Lens Hot shoe Zoom lever (Pop up flash) switch Shooting: i (telephoto) / Flash j (wide angle) Speaker Playback: k (magnify) / g (index) Ring release button Strap mount DC coupler cable port Shutter button Memory card/battery cover Power button/lamp Tripod socket • In this guide, icons are used to represent the corresponding camera buttons and dials on which they appear or which they resemble. • The fo
Streszczenie treści zawartej na stronie nr. 5
Part Names and Conventions in This Guide (Shortcut) / c (Direct print) button Remote terminal TM + (AE lock/FE lock) / d (Jump) button HDMI terminal (AF Frame Selector) / n button a (Single image erase) button (Metering) button Screen (LCD monitor) ISO speed / Up button Diopter adjustment dial e (Macro) / f (Manual focus) / Viewfinder Left button Microphone Control dial Indicator FUNC./SET button 1 (Playback) button h (Flash) / Right button Movie button l (Display) / Down button AV OUT (Audio
Streszczenie treści zawartej na stronie nr. 6
Contents Package Contents .............................2 Special Modes for Other Purposes....................................... 81 Compatible Memory Cards................2 Shooting Various Movies ................ 88 Preliminary Notes and Legal Information.......................................3 Part Names and Conventions in 4G mode .............................91 This Guide .......................................4 Shooting in Program AE Mode Contents ........................................
Streszczenie treści zawartej na stronie nr. 7
Contents Printing Images .............................202 7 Setting Menu ..................167 Using an Eye-Fi Card....................212 Adjusting Basic Camera Functions .................................... 168 9 Appendix.........................215 Troubleshooting.............................216 8 Accessories....................181 On-Screen Messages....................220 Tips on Using Included On-Screen Information..................222 Accessories ................................ 182 Func
Streszczenie treści zawartej na stronie nr. 8
Contents: Basic Operations 4 Shoot Use camera-determined settings (Auto Mode)............................. 44 Shooting people well IP V w Portraits Kids and Pets At the Beach Against Snow (p. 68) (p. 68) (p. 69) (p. 70) Matching specific scenes J Landscape Night Scenes Sports (p. 68) (p. 69) (p. 69) S t O Under Water Fireworks Foliage (p. 69) (p. 70) (p. 70) Applying special effects Vivid Colors Poster Effect “Aged” Photos Fish-Eye Effect (p. 71) (p. 71) (p. 73) (p. 74) Miniature Effect To
Streszczenie treści zawartej na stronie nr. 9
Contents: Basic Operations 1 View View images (Playback Mode) ................................................... 136 Automatic playback (Slideshow)................................................. 146 On a TV ...................................................................................... 186 On a computer.............................................................................. 26 Browse through images quickly.................................................. 141 Erase images..
Streszczenie treści zawartej na stronie nr. 10
Safety Precautions • Before using the product, please ensure that you read the safety precautions described below. Always ensure that the product is used correctly. • The safety precautions noted on the following pages are intended to prevent injuries to yourself and other persons, or damage to the equipment. • Be sure to also check the guides included with any separately sold accessories you use. Denotes the possibility of serious injury or death. Warning • Do not trigger the flash in close
Streszczenie treści zawartej na stronie nr. 11
Safety Precautions • Turn the camera off in places where camera use is prohibited. The electromagnetic waves emitted by the camera may interfere with the operation of electronic instruments and other devices. Exercise adequate caution when using the camera in places where use of electronic devices is restricted, such as inside airplanes and medical facilities. • Do not play the supplied CD-ROM(s) in any CD player that does not support data CD-ROMs. It is possible to suffer hearing loss from
Streszczenie treści zawartej na stronie nr. 12
Safety Precautions • In regular use, small amounts of smoke may be emitted from the flash. This is due to the high intensity of the flash burning dust and foreign materials stuck to the front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from the flash to prevent heat build-up and damage to the unit. • Remove and store the battery when you are not using the camera. If the battery is left inside the camera, damage caused by leakage may occur. • Before you di
Streszczenie treści zawartej na stronie nr. 13
Initial Preparations Prepare for shooting as follows. Attaching Accessories Attach the strap. Attach the included strap to the camera as shown. On the other side of the camera, attach the strap the same way. Attach the lens cap to the strap. Remove the lens cap from the lens and attach the lens cap cord to the strap. Always remove the lens cap before turning the camera on. Try attaching the lens cap to the neck strap when the cap is not in use. Keep the lens cap on the lens when the c
Streszczenie treści zawartej na stronie nr. 14
Initial Preparations Charging the Battery Before use, charge the battery with the included charger. Be sure to charge the battery initially, because the camera is not sold with the battery charged. Remove the cover. Insert the battery. After aligning the o marks on the battery and charger, insert the battery by pushing it in ( ) and down ( ). Charge the battery. For CB-2LC: Flip out the plug ( ) and plug the charger into a power outlet ( ). For CB-2LCE: Plug the power cord into the CB-2L
Streszczenie treści zawartej na stronie nr. 15
Initial Preparations • To protect the battery and keep it in optimal condition, do not charge it continuously for more than 24 hours. • For battery chargers that use a power cord, do not attach the charger or cord to other objects. Doing so could result in malfunction or damage to the product. • For details on charging time and the number of shots and recording time possible with a fully charged battery, see “Specifications” in the Getting Started guide. Inserting the Battery and Memory Ca
Streszczenie treści zawartej na stronie nr. 16
Initial Preparations If you insert the battery facing the wrong way, cannot be locked into the correct position. Always confirm that the battery is facing the right way and locks when inserted. Insert the memory card. Insert the memory card facing as shown until it clicks into the locked position. Make sure the memory card is facing the right way when you insert it. Inserting memory cards facing the wrong way may damage the Label camera. Close the cover. Lower the cover in the directi
Streszczenie treści zawartej na stronie nr. 17
Initial Preparations Using the Screen Prepare the screen for use. Open the screen ( ) and rotate it toward the lens 180° ( ). Close the screen in this orientation ( ). • The screen can only open to approximately 175° in direction . Be careful not to open the screen any further than this, as it will damage the camera. Adjusting the Screen Angle and Orientation You can adjust the angle and orientation of the screen as needed, to suit shooting conditions. To protect the screen when the cam
Streszczenie treści zawartej na stronie nr. 18
Initial Preparations Setting the Date and Time A screen for setting the date and time is displayed the first time you turn the camera on. Be sure to specify the date and time, which is the basis for dates and times added to your images. Turn the camera on. Press the power button. The [Date/Time] screen is displayed. Set the date and time. Press the qr buttons to choose an option. Press the op buttons or turn the 7 dial to specify the date and time. When finished, press the m button. Set
Streszczenie treści zawartej na stronie nr. 19
Initial Preparations • Unless you set the date, time, and local time zone, the [Date/Time] screen will be displayed each time you turn the camera on. Specify the correct information. • To set daylight saving time (1 hour ahead), choose in step 2 and then choose by pressing the op buttons or turning the 7 dial. Changing the Date and Time Adjust the date and time as follows. Access the camera menu. Press the n button. Choose [Date/Time]. Move the zoom lever to choose the 3 tab. Press the o
Streszczenie treści zawartej na stronie nr. 20
Initial Preparations Display Language The display language can be changed as needed. Enter Playback mode. Press the 1 button. Access the setting screen. Press and hold the m button, and then immediately press the n button. Set the display language. Press the opqr buttons or turn the 7 dial to choose a language, and then press the m button. Once the display language has been set, the setting screen is no longer displayed. • A clock icon is displayed if you wait too long in step 2 after pr
