Streszczenie treści zawartej na stronie nr. 1
Quick Start Guide
Table of Contents
Introduction 1
How to Use the Documentation Provided 3
Preparing the Machine 4
Installing the MP Drivers 6
Reading the On-screen Manuals 8
Loading Paper 9
Operation Panel 10
Menu Items 11
Copying 13
Printing from a Memory Card 14
Printing from Your Computer 18
Scanning Images 20
The following FINE Cartridges are compatible with this product.
Printing Photographs Directly from a Compliant Device 21
Replacing a FINE Cartridge 26
Specifications 28
www.canon-asia.
Streszczenie treści zawartej na stronie nr. 2
Model Number: K10308 (MP228)
Streszczenie treści zawartej na stronie nr. 3
Introduction This Quick Start Guide uses the following symbols to indicate important information. Always observe the instructions indicated by these symbols. Warning Instructions that, if ignored, could result in death or serious personal injury caused by incorrect operation of the equipment. These must be observed for safe operation. Caution Instructions that, if ignored, could result in personal injury or material damage caused by incorrect operation of the equipment. These must be observed
Streszczenie treści zawartej na stronie nr. 4
Exif Print This machine supports ExifPrint. Exif Print is a standard for enhancing the communication between digital cameras and printers. By connecting to an Exif Print-compliant digital camera, the camera’s image data at the time of shooting is used and optimized, yielding extremely high quality prints. ® International ENERGY STAR Program ® As an ENERGY STAR Partner, Canon Inc. has determined that this ® product meets the ENERGY STAR guidelines for energy efficiency. Power Requirements Nev
Streszczenie treści zawartej na stronie nr. 5
How to Use the Documentation Provided Printed Documentation Setup Sheet Be sure to read this sheet first. This sheet includes instructions for setting up your machine and getting it ready for use. Quick Start Guide (This guide) Read this guide when starting to use the machine. After following instructions in your setup sheet, we recommend you read this guide to familiarize yourself with the basic operation of some of the main functions that can be performed on your machine. On-screen Manuals
Streszczenie treści zawartej na stronie nr. 6
Preparing the Machine Be sure to read your setup sheet first for setting up your machine and getting it ready for use. Unpack the machine Please confirm the included items against the illustration printed on the lid of the packing box. Important A USB cable is necessary to connect the machine with your computer. 1 Turn on the machine. Caution Be sure to remove the tapes and protective material before you turn on the machine. Note The tape or the protective material position is subject to chang
Streszczenie treści zawartej na stronie nr. 7
Selecting the Language for the LCD 1 Press the ON/OFF button to turn on the machine. 2 Press the Menu button seven times. 3 Press the ] button twice, then press the OK button. 4 Press the ] button twice, then press the OK button. 5 Press the [ button repeatedly to select the leftmost language. 6 Press the ] button the number of times in the following table according to your desired language. Language Time(s) Language Time(s) JAPANESE 0 SWEDISH 9 ENGLISH 1 DANISH 10 GERMAN 2 FINNISH 11 FRENCH 3
Streszczenie treści zawartej na stronie nr. 8
Installing the MP Drivers ® ® Information Common to Windows and Macintosh Notes on the Installation Process If the Select Language screen appears, select a language, then click Next. If the Select Your Place of Residence screen appears, select your place of residence, then click Next. There are two ways of installing the MP Drivers and other software*: Easy Install: the items included on the Setup CD-ROM are installed automatically Custom Install: you can select particular items to install
Streszczenie treści zawartej na stronie nr. 9
Users in Asia Scan Soft OmniPage SE can be installed only on an English operating system. Information for Macintosh ® Since Mac OS 9, Mac OS X Classic environments, or Mac OS X v.10.2.7 or earlier are not supported, do not connect the machine to these. Do not remove or insert the USB cable during installation, as this may result in the computer or machine not operating normally. Before installing the MP Drivers, disable all anti-virus programs and automatically loading programs or remove
Streszczenie treści zawartej na stronie nr. 10
Reading the On-screen Manuals For detailed instructions on installing the on-screen manuals, refer to your setup sheet. You can view the on-screen manuals in the following way: To view the on-screen manual, double-click the XXX On-screen Manual shortcut icon on the desktop, or click Start > All Programs (or Programs) > Canon XXX Manual > XXX On-screen Manual (where “XXX” is your machine’s name). System Requirements Browser: Windows HTML Help Viewer Note ® Microsoft Internet Explorer 5.0 or la
Streszczenie treści zawartej na stronie nr. 11
Loading Paper Important If you cut plain paper to 4" x 6" / 101.6 x 152.4 mm, 5" x 7" / 127.0 x 177.8 mm, or 2.13" x 3.39" / 54.0 x 86.0 mm (credit card-size) for a trial print, it can cause paper jams. Always load paper in portrait orientation. Loading paper in landscape orientation can cause the paper to be jammed. 1 Open the Paper Support, then pull out the 1 Paper Support Extension. 2 Open the Paper Output Tray. 3 Open the Output Tray Extension. 4 Adjust the position of the Paper Thickne
Streszczenie treści zawartej na stronie nr. 12
Operation Panel (1) (2) (3) (1) ON/OFF button / Power lamp Turns the machine on and off. Lights or flashes green to indicate the power status. Before turning on the machine, make sure the Document Cover is closed. (2) LCD (Liquid Crystal Display) Displays messages, menu selections, and the operational status. (3) Alarm lamp (14) Lights or flashes orange when an error, such as paper-out (13) (4) or ink-out, occurs. (4) MEMORY CARD button (5) (12) Switches the machine to memory card mode. (11)
Streszczenie treści zawartej na stronie nr. 13
Menu Items Press the Menu or Photo Index Sheet button to display the menu items. You can specify the various print settings or perform the machine maintenance by using these menu items. Note You can select DEVICE SETTINGS and MAINTENANCE in any mode. Direct Printing mode is displayed only when a PictBridge compliant device is connected to the machine. COPY mode SCAN mode Menu button Menu button ENLARGE/REDUCE DEVICE SETTINGS PRESET RATIO MAINTENANCE ZOOM Direct Printing mode FIT-TO-PAGE M
Streszczenie treści zawartej na stronie nr. 14
DEVICE SETTINGS and MEMORY CARD mode MAINTENANCE under each mode Menu button contains the following menu items. MEMORY CARD MODE DEVICE SETTINGS INDEX PRINT SETTINGS PRINT ALL PHOTOS EXTENDED AMOUNT SELECT PHOTO PICTBRIDGE SET SELECT RANGE PAGE SIZE STICKR MEDIA TYPE DPOF PRINT QLTY PAGE SIZE BORDERLESS PRINT MEDIA TYPE IMAGE ENHANCEMENT PRINT QLTY OTHERS BORDERLESS PRINT DATE DISPLAY PRINT DATE READ/WRITE ATTRB FILE NO. PRINT LANGUAGE SETTING IMAGE ENHANCEMENT QUIET MODE DEVICE SETTINGS RES
Streszczenie treści zawartej na stronie nr. 15
Copying Making Copies This section describes the basic procedure to make copies. 1 Turn on the machine. 2 Press the COPY button. 3 Load paper. 4 Load the original on the Platen Glass. 5 Specify the copy settings. (1) Press the [ or ] button to specify the number of copies (max. 99 copies). (2) Press the Menu button to adjust the settings as necessary. For details, refer to “Changing the Copy Settings” in the User’s Guide on-screen manual. 6 Press the Color button for color copying, or the Black
Streszczenie treści zawartej na stronie nr. 16
Printing from a Memory Card Inserting the Memory Card 1 Turn on the machine. 2 Open the Card Slot Cover. 3 Insert one and only one memory card into the Card Slot. Card Type Inserting Card Compact Flash (CF) card Microdrive Insert into the xD-Picture card* left Card Slot. Lights up SD Secure Digital memory card SDHC memory card miniSD Card* Insert into the right Card Slot. microSD Card* MEMORY STICK Lights up MEMORY STICK PRO MEMORY STICK Duo* MEMORY STICK PRO Duo* MultiMediaCard
Streszczenie treści zawartej na stronie nr. 17
Removing the Memory Card 1 Open the Card Slot Cover. 2 Make sure that the Access lamp is lit, then remove the memory card. 3 Close the Card Slot Cover. Printing an Index of All Photos (INDEX) 1 Prepare for printing. (1) Turn on the machine. (2) Load paper. 2 Insert the memory card. (1) Press the MEMORY CARD button. (2) Insert the memory card into the Card Slot. See “Inserting the Memory Card” on page 14. 3 Select the print menu. (1) Press the Menu button to display MEMORY CARD MODE. (2) Press th
Streszczenie treści zawartej na stronie nr. 18
Using Useful Printing Functions Printing All Photos (PRINT ALL PHOTOS) Prints all photos saved on the memory card. Printing Selected Photos (SELECT PHOTO) Specifies how may copies to print for each photo. Printing A Range Of Photos (SELECT RANGE) Prints a range of photos in sequence on a memory card. Printing on Stickers (STICKR) Prints your favorite photo with a frame on Canon Photo Stickers. Printing According to DPOF Settings (DPOF) Prints according to the Digital Print Order Format (DPOF) se
Streszczenie treści zawartej na stronie nr. 19
Printing by Using the Photo Index Sheet 1 Turn on the machine, and load A4 or Letter-sized white paper. 2 Insert a memory card into the Card Slot. See “Inserting the Memory Card” on page 14. 3 Press the Photo Index Sheet button. 4 Make sure that PRINT is selected, then press the OK button. If the memory card contains 36 or less images, printing of the Photo Index Sheet starts. Proceed to step 6. If the memory card contains 37 or more images, proceed to step 5. 5 Press the [ or ] button to sel
Streszczenie treści zawartej na stronie nr. 20
Printing from Your Computer This section describes procedure for basic printing. Printing with Windows Note Depending on your application program, operations may differ. For details, refer to the instruction manual of your application. The steps described in this section are for printing in Windows Vista. 1 Turn on the machine and load the paper in the machine. 2 Create a document or open a file to print using an appropriate application software. 3 Select Print on the application software’s Fil
