Instrukcja obsługi Sanyo VCC-4794

Streszczenie treści zawartej na stronie nr. 1

L5BG2_US(VCC-4794)(ENGLISH).fm 1 ページ ２００５年８月２４日　水曜日　午前１１時３９分
English Français Español
SPECIFICATIONS INFORMATION TO USER PRECAUTIONS
Safety Guard
Scanning system : NTSC standard 525 lines, 60 fields/sec.
■ In case of a problem
Image sensor : 1/3" interline transfer method CCD
Do not use the unit if smoke or a strange odor comes from the unit,
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT
Number of effective pixels : 768 (H) x 494 (V)
OPERATING AND MAINTENANCE INSTRUCTIONS IN THE or if it se

Streszczenie treści zawartej na stronie nr. 2

L5BG2_US(VCC-4794)(ENGLISH).fm 2 ページ ２００５年８月２４日　水曜日　午前１１時３９分 Español Français English CONNECTIONS AND ADJUSTMENTS b Attaching the lens b Camera attachment b Flange-back adjustment Use any DC type and CS mounting lens equipped with an auto iris (sold separately). When attaching the camera, make sure to verify that the attachment surface will allow full This normally does not need adjustment. If the picture is out of focus at the telephoto position, tightening of the screws. Plaster board, etc.