Instrukcja obsługi Gianni Industries DG-12

Streszczenie treści zawartej na stronie nr. 1

The Digital Keyless Entry System (4 digit)
Operation User's Manual

DG-10 DG-11 DG-12
(Surface Mount) (Mount) (Mount/ANSI size)
ANSI Box


I. Features:
4 digit codes
Door Reed Switch Input for Anti-Trailing
10 user PINs
Fully Programmable via keypad and master code
Non-Volatile Memory
Invalid PIN Lock-out

II. Specifications:
Operating Voltage: 9~14 Vdc
Current Draw: Average 30mA, Peak 80mA @ 12Vdc
Input: One request-to-exit, and time out reed switch
Relays: N

Streszczenie treści zawartej na stronie nr. 2

III. Program Instruction: Enter Program Mode: 1. Enter the master code twice (Factory master is 「1234 」) →2 beeps and the Yellow LED will light up. → you are now in the "programming mode". 2. Note: After 60 seconds if you have not entered any codes or data, the system will automatically exit from the programming mode. After 6 wrong attempts at the master code the lockout facility will operate. Exiting from the program mode: 1. Press 「# 」 to exit from the programming mode. 2. Note