Instrukcja obsługi Electrolux BUILT-IN EDW7505HPS

Streszczenie treści zawartej na stronie nr. 1

IMPORTANT: For proper operation and appearance of unit,
cabinet opening should have dimensions as shown in Figure 2.
Installation Preparation
Leveling and Securing
Dishwasher
2
If unit is to be placed in a corner, there must be at least a 2-inch
5
Property Damage
side clearance to open door.
NOTE: Put unit on its back being careful not to pinch the Water Dishwasher within
Do not use the furnished drain hose or a rubber garden hose
Drain Hose. 2. Floor should be flat and free of any obstruction.

Streszczenie treści zawartej na stronie nr. 2

5. If the cabinet wall is wood, sand edges of hole until smooth and 6. If levelers need to be removed, make sure that the floor is free of all rounded. If cabinet wall is metal, cover all sharp edges with obstructions. Finishing the Drain Custom Wood Panel 10 8 electrical or duct tape to avoid cutting drain hose. 7. Carefully place dishwasher inside cabinet area such that is centered in opening. Use caution when moving dishwasher to Connection 6. Move unit back in place while routing drai