Streszczenie treści zawartej na stronie nr. 1
DIGITAL
VIDEO RECORDER
S S P P R R - - 7 7 1 1 1 1 6 6 / / 7 7 4 4 1 1 6 6
S S P P R R - - 7 7 1 1 1 1 6 6 / / 7 7 4 4 1 1 6 6
U U s s e e r r G G u u d d e e
U U s s e e r r G G u u d d e e
Please read this manual thoroughly before
use, and keep it handy for future reference.
AB82-01373A REV.00
ii
ii
Streszczenie treści zawartej na stronie nr. 2
NOTICE This is a user guide for SPR Smart System. This guide gives you SPR Smart System’s external spec, name, PAN/TILT Control, the way of attaching peripheral devices and configuration. The copyright of this manual belongs to Samsung Electronics Co., Ltd. It is prohibited to copy this manual without permission. Any damage or break owing to carelessness is out of our warranty service. Should you need open the system for extention or repairing, it is recommended that you ask for an engineer’
Streszczenie treści zawartej na stronie nr. 3
Streszczenie treści zawartej na stronie nr. 4
Notice before installation Notice for Safety [ Please check these out before using the system.] This is for the safety of customer’s property and life. Please read carefully and follow the direction. Avoid any place that has high moisture, dust or black dirt. Avoid any place that has direct sun light or heat. High temperature is not good for the Warning / Notice product. Message for problem Message for problem Keep product away from a electric shock or magnetic substance. that might cause de
Streszczenie treści zawartej na stronie nr. 5
Warning Warning Locate the product in shade where proper Do not disassemble or repair the system by Replace the battery with the product that If HDD is full, change the set-up to keep up temperature remains and avoid place next yourself since the system has high voltage the manufacturer appointed or the equal with recording and check again if you allow to hot object. Do not place the equipment part inside. product. Dispose the battery according to the data to be erased. or device in the place p
Streszczenie treści zawartej na stronie nr. 6
Notice Notice Avoid places with strong magnetic or electrical Keep it under proper temperature and Place it away from severe impact or Use a grounded power cable only. field, severe impact or places near a radio or humidity conditions. shock. It might cause damage to the TV. equipment. Maintain a low level of humidity and the Keep it away from magnetic sources, electric operation temperature of 0 °C to 33°C. wave or severe tremor. Be sure to remove the foreign substance Do not put any heavy it
Streszczenie treści zawartej na stronie nr. 7
Product Contents Contents Notice [ Check to make sure the box has everything below. ] Contact your dealer if there is any missed item. Notice before installation (Optional: Monitor- Recommended monitor is one that supports the resolution of at least 1024 768, 60Hz) Notice for Safety Product Contents Contents I. System Outline 1. Product Introduction SPR SMART SYSTEM Key Board 2. Feature II.Multi channel Video Surveillance 1. Mainscreen 2. Screen Division 3. State screen RS-232 Serial Port Mous
Streszczenie treści zawartej na stronie nr. 8
IV. Search Screen 1. Run Search Program 2. Search Date and Time Selection 3. Camera Selection 4. Playing Recording 5. Search Tool 6. Audio Setup 7. Data Backup 8. Print Search Screen 9. Motion Search V. Appendix 1. Formatting a CD using Direct CD 2. Formatting a CD using InCD 3. Serial cable connection (input) 4. PAN/TILT Drive connection 5. External Sensor input and Control System Outline output connection 6. Inatalling WebDVR 7. Installing PPP in Windows 2000 8. Setting Guest User, Passwor
Streszczenie treści zawartej na stronie nr. 9
System Outline Product Introduction Feature 1 2 High picture quality, speed, and recording Digital Video Recorder (SPR-7116/7416) digitally records the video image so it provides clear • Maximum of 30 Frame per second (320X240, standard) image like a picture. It also has a function to record continuously so you don’t have to worry about Resolution: the frequent change of tapes. DVR, therefore, is a video recording surveillance system for the - NTSC : 640X480, 320X240, 160X120 next generation
Streszczenie treści zawartej na stronie nr. 10
System Outline Process multiple image Control from remote area with Camera • Processes image through motion detection • When using PTZ camera, it remotely controls camera’s Pan/Tilt/Zoom. • You may select up to 5 areas per image and control its sensibility. • Improve image quality (Clear and flexible) What is PTZ camera? • Zoom in/out PTZ is abbreviated from Pan/Tilt/Zoom. PTZ camera is different from • Adjust brightness other normal camera in that it can rotate, adjust, zoom in & out itse
Streszczenie treści zawartej na stronie nr. 11
Multi channel Video Surveillance 2
Streszczenie treści zawartej na stronie nr. 12
Multi channel Video Surveillance State Screen Mainscreen Screen Division System Status Division Function Select 1 2 Screen division can be done by [Screen Division] button PTZ camera display PAN/TILT REC Recording status Camera name Screen Division Camera : Display the position of the camera under surveillance. The default value is 1[POSITION1]. But you can modify it in setup. Alarm/Sensor/Audio toggle button Camera/Sensor/Alarm/Audio Screen Division button Function Select Recording Status : Dis
Streszczenie treści zawartej na stronie nr. 13
.Multi channel Video Surveillance Screen Division Full screen display • Screen division can be made in 4, 6, 9, 16, full screen and quad rotation. • Full screen mode of divided screen. (Screen division type can be different depending on model.) • It will look as below. • Any click on certain camera will give you full screen. SPR-7416 4ch 6ch 9ch 16ch full screen rotation SPR-7116 4ch 9ch 16ch Full ScreenRotation How to operate Exiting Full screen display Click the division button you want. Div
Streszczenie treści zawartej na stronie nr. 14
.Multi channel Video Surveillance State screen Emergency Recording, Alarm off, 3 4 Setup, Search, Power • Display the status of event such as continuous recording, sensor, alarm, motion, audio or Emergency Recording network connection. You can start recording regardless of recording schedule while monitoring live image. • State screen displays [ time of event - camera number - event type ] All the installed cameras start recording together and “REC” appears on screen. You can stop emergency re
Streszczenie treści zawartej na stronie nr. 15
.Multi channel Video Surveillance PAN/TILT Mode I - Speed Dome 5 How to PreSet How to Preset Feature : Location of camera can be appointed from 1 to 10 Display current date and time PAN/TILT : controls camera in left and right / up and down / diagonally adjust it Change the camera direction to anywhere you want FOCUS : adjust focus of the camera lens. (not applied to AUTO FOCUS lens) Select Preset number IRIS : adjust IRIS Out of the camera Select “ “ ZOOM : adjust Zoom In/ Zoom Ou
Streszczenie treści zawartej na stronie nr. 16
.Multi channel Video Surveillance PAN/TILT Mode II - RX Live Audio Data Receiver(Already Setup) Outputting Feature 6 7 By zooming in one camera channel with the audio feature in the Monitoring modem, the user can output both the video data and the audio data in real time. (If the user zooms in one channel, “Volume” window will appear only for the channel where the audio data is outputted in real time. “Audio” display in the Monitoring mode indicateds that both the video data and audio data ar
Streszczenie treści zawartej na stronie nr. 17
Environment Setup 3
Streszczenie treści zawartej na stronie nr. 18
Environment Setup Description Select Camera : To decided which camera to use Hardware When Camera Button is pressed: Camera in use 1 When Camera Button is not pressed: Camera not in use Press set up button for system setup camera not in use’ is selected, it may lower the recording speed, so it is important to select Screen which inputs password will be appeared. The screen will not be appeared camera which you will use only. if password is not created. Name : Input the name of place which the
Streszczenie treści zawartej na stronie nr. 19
Environment Setup Hardware [Sensor] Description Select Sensor : The number of external sensors and input terminal should be correspondent to each other. NC/NO : Configure Sensor Each time when the button is clicked it will change to [NC]<->[NO] and vice versa. (Default is set to [NC]) NC (Normal Close Type sensor) : While on detection mode, choose this when sensor is near the point of contact NO (Normal Open Type sensor) : While on detection mode, choose this when sensor’s contract point is
Streszczenie treści zawartej na stronie nr. 20
Environment Setup Hardware [Alarm] Description Select Alarm : This button is to choose output of alarm terminal you wish to setup. When button is pressed: Appropriate alarm is selected When button is not pressed: Appropriate alarm is not selected Name : Input name of alarm to use Input Sensor No. : If you want alarm to automatically operate from external sensor, input external sensor that’s linked to alarm. For example) If you wish to operate number 1 sensor when number 3 activates, choose alar
