Streszczenie treści zawartej na stronie nr. 1
QR404
User’s Manual
Contact Us:
Digital Peripheral Solutions, Inc.
8015 E. Crystal Drive
Anaheim, CA 92807
Website:
http://www.Q-See.com
Customer Service:
Phone: 877-998-3440 x 538
Email:cs@dpsi-usa.com
Tech Support:
Phone: 877-998-3440 x 539
Email:ts@dpsi-usa.com
Fax:
714-998-3509
Revised 3/1/2010
Streszczenie treści zawartej na stronie nr. 2
QR404 User Manual CONTENTS Chapter 1: DVR Features .................................................................................................................... 2 Chapter 2: Layout ............................................................................................................................... 3 2.1: Front Panel ...............................................................................................................................................................
Streszczenie treści zawartej na stronie nr. 3
QR404 User Manual 5.2.6: Multi Player .......................................................................................................................................................... 17 5.2.7: Device Management ............................................................................................................................................ 19 5.2.7.1: HDD Management ..........................................................................................................
Streszczenie treści zawartej na stronie nr. 4
QR404 User Manual 8.1: Operation Function Table ........................................................................................................................................... 36 8.2: Setting up Alarm Record Mode .................................................................................................................................. 37 8.3: Troubleshooting ...................................................................................................................
Streszczenie treści zawartej na stronie nr. 5
QR404 User Manual Safety Instructions 1. Use proper power source. Do not use this product with a power source that applies more than specified voltage (100-240V AC). 2. Never insert anything metallic into the DVR case. Putting something into the DVR case can be a source of dangerous electric shock. 3. Do not operate in wet & dusty area or use near water. Avoid places like a damp basement or dusty hallway. 4. Do not expose this product to rain or use near water. If this produ
Streszczenie treści zawartej na stronie nr. 6
QR404 User Manual Chapter 1: DVR Features Function Brief Description Real-Time Supports Real-Time Surveillance via Monitor Monitoring Save Files DVR Saves Real-Time Recording of Image Files to HDD Backup Files Supports DVR Backup of Recorded Image Files via USB Flash Drive and Hard Drive Playback Files Supports DVR single CH and Multiple CH Playback of Recorded Files Network Supports Remote Surveillance by Multiple Users Simultaneously Operation Alarm Setting Supports HDD &
Streszczenie treści zawartej na stronie nr. 7
QR404 User Manual Chapter 2: Layout 2.1: Front Panel Item Button Name Symbol Number Function POWER 1 If the “Green” Indicator Light is on, the System is Getting Power INDICATOR 2 IR Receiver Receives Signal from Remote Control 3 HDD When the “Red” Indicator Light Flashes, it Means the Hard Drive is Being Read or Written to CH 1 CH2 4 Select Single Channel Display CH3 CH4 5 QUAD Display all Cameras in Live Display or Playback Mode 6 REW Move Left/Reve
Streszczenie treści zawartej na stronie nr. 8
QR404 User Manual 2.2: Rear Panel Item Number Name/Symbol Description Function 1 CH1-CH4 VIDEO INPUT Ch1-4 (BNC Interface) Connection VIDEO VIDEO 2 Connect Monitor Output (BNC Interface) OUTPUT OUTPUT AN1, AN2, 3 Audio Input CH1-4 Audio Signal Input (RCA Interface) Connection AN3, AN4 AUDIO 4 Audio Output Audio Signal Output (RCA Interface) Connection OUTPUT LAN Ethernet Port Intranet and Internet Connection (RJ-45 Interface) 5 6 USB Port USB Mouse Connection
Streszczenie treści zawartej na stronie nr. 9
QR404 User Manual 2.2.2: Remote Control 1 1-8 Channel Select 1-8 ; Numeric key 2 9,0 Numeric Key Preview all Channels 3 ALL 4 MENU Enter/Exit Main Menu 5 ▲ Up Key 6 ▼ Down Key 7 Left / Right Key ◄ / ► Select Key/ Edit Key 8 SEL 9 Rewind 10 Play Recorded Events ► 11 Forward Key 12 Manual Recording ● Pause / Frame Play 13 14 Manually Stop Recording or Playback ■ 15 AUDIO Play Audio from Selected Camera 16 MUTE Mute Audio 2.2.3 Mouse Operation For your conven
Streszczenie treści zawartej na stronie nr. 10
QR404 User Manual Chapter 3: DVR Installation 3.1: Hard Drive Installation Caution ： NEVER Install or remove the hard drive while the DVR is running! The model has a Hard Disk Drive (HDD) drawer. Please use key provided to open the drawer and insert the HDD as follows: (1) Remove screws and open DVR upper cover carefully; (2) Insert Power Cord and data cable securely into matching ports on hard drive; (3) Put the upper cover back carefully, re-attach screws. 3.2: Connecting
Streszczenie treści zawartej na stronie nr. 11
QR404 User Manual Chapter 4: DVR Boot up 4.1: System Initialization After connecting the power adapter and turning on the power button, the system will boot-up and you will see a “System Initializing” message (See Picture 1). 4.2: Main Interface (Picture 1) Once the system initialization process is complete, the system will enter the main interface (See Picture 2). If the system does not detect video input, you will receive a “Video Loss” message for each camera as depicted in
Streszczenie treści zawartej na stronie nr. 12
Main Menu QR404 User Manual Chapter 5: DVR Menu 5.1: Main Menu At-a-Glance Color Set Camera Dwell Time Display Recording Search Network Playback Rec. Search Detail File File Backup HDD Management Alarm Setting E-Mail Setting Device PTZ Setting Management Mobile Area Setting Motion Time Setting User Password Video Setting System Language Select System Information System Maintenance
Streszczenie treści zawartej na stronie nr. 13
QR404 User Manual 5.2: Main Menu The right-click menu in the Main Interface mode (Picture 3) allows you to access the Main Menu interface (Picture 4). You can use the right click function of the mouse or the Menu button on the front panel of the DVR to enter into the Main Menu interface. Use the mouse or the FWD and REW button on your DVR’s front panel or remote control to navigate around the Main Menu Interface and select the icon of the program you wish to access (See Picture 4). Use
Streszczenie treści zawartej na stronie nr. 14
QR404 User Manual Please note that any modifications you make through the Camera Setup interface will not be applied until you click the [APPLY] button at the bottom of the dialog box (Picture 5). Once you do this, you will then be prompted to save your settings, and you must click [OK] in order for the changes to take effect. If you wish to abort the changes you made, simply click the [Exit] button on the bottom of your dialog box (Picture 5). By clicking on the [DEFAULT] button at t
Streszczenie treści zawartej na stronie nr. 15
QR404 User Manual of your SCHEDULE interface to adjust the recording options for all channels or from the channels specified in the drop down menu if you prefer to set the recording parameters for each individual channel separately. You are also given the option of setting up the date parameters of your scheduled recordings by choosing from the drop down menu on the bottom of your Schedule interface in the “From” and “To” options. Checking the ALARM (motion record), GENERAL (always re
Streszczenie treści zawartej na stronie nr. 16
QR404 User Manual 5.2.3.3: STATIC When selecting Static as your Network type, you will need to set the Network setting on the DVR to match settings of your Router. To do this, bring up the command prompt on any computer attached to your Router by typing cmd into your Run program (Picture 9). Type in ipconfig at the prompt (see red arrow on Picture 9) to access the router settings. Write down the gateway and subnet mask numbers (Green arrows on Picture 9) so you can enter them into
Streszczenie treści zawartej na stronie nr. 17
QR404 User Manual an IP address and be directed to whatever the current dynamic IP address is, so that you can always access the DVR by entering the same address. This DVR also supports the DDNS service provided by dyndns. You can get more information on how to use these services from the myq-see.com or www.dyndns.com website. 5.2.3.4: Port Forwarding To access the DVR from a remote computer over the internet you will need to forward port 80 and port 9000 of the Router the DVR is attac
Streszczenie treści zawartej na stronie nr. 18
QR404 User Manual 5.2.3.5: Pop-Ups & ActiveX Controls To access the DVR through Internet Explorer after you have configured your network settings on your DVR to match the settings of your Router and forwarded your ports as discussed above, you will need to modify your browser controls to allow Pop-ups. To do this, go to the Internet Explorer tool bar and select the "tools" option (RED box in Picture 15), then select the "Pop up Blocker" option and select "Turn Off Pop-up Blocker” (BLUE
Streszczenie treści zawartej na stronie nr. 19
QR404 User Manual If you get a error message that says the program cannot load because the publisher is unknown or the program is unsigned, go to internet explorer →Tools →Internet Options, then go to the “Advanced” tab (RED box in Picture 18). This will open the window in Picture 19. Scroll down to “Security”, and select the options to “Allow software to run or install even if the signature is invalid”, and “Allow Active Content to Run Files on My Computer” (RED box in Picture 19).
Streszczenie treści zawartej na stronie nr. 20
QR404 User Manual File List On the [Video search] menu mode, click [File list] and you will get a pop-up menu as shown in Picture 21. From here, you are able to search through the files associated with all the recorded material each channel has recorded. This feature allows you to view all of the available files by channel and type (all, normal, or alarm) and you can select each of these individual files by clicking on the box next to the name of the file. You can also use your system’
