Streszczenie treści zawartej na stronie nr. 1
BN68-00678A-01_cover 2004.4.28 6:11 PM Page 3
Owner’s Instructions
HP-P4261
This device is a Class B digital apparatus.
Streszczenie treści zawartej na stronie nr. 2
BN68-00678A-01_002~23 2004.4.28 6:12 PM Page 2 Important Warranty Information Regarding Television Format Viewing Wide screen format PDP Displays (16:9,the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format,or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and imag
Streszczenie treści zawartej na stronie nr. 3
BN68-00678A-01_002~23 2004.4.28 6:12 PM Page 3 Table of Contents Selecting the Internal Mute............................66 General Information Your New Plasma Display Panel ......................6 Channel Control Remote Control Buttons ..................................8 Fine Tuning Channels ..................................68 Wall Installation Instructions ..........................10 LNA (Low Noise Amplifier) ..........................69 How to assemble the Stand-Base ..................14
Streszczenie treści zawartej na stronie nr. 4
BN68-00678A-01_002~23 2004.4.28 6:12 PM Page 4
Streszczenie treści zawartej na stronie nr. 5
BN68-00678A-01_002~23 2004.4.28 6:12 PM Page 5 PLASMA DISPLA Y P ANEL General Information Your New Plasma Display Panel ......................................................6 Remote Control Buttons ..................................................................8 Wall Installation Instructions ..........................................................10 How to assemble the Stand-Base ....................................................14
Streszczenie treści zawartej na stronie nr. 6
BN68-00678A-01_002~23 2004.5.4 2:22 PM Page 6 Your New Plasma Display Panel Front Panel Speakers Remote Control Signal Receiver Aim the remote control towards this spot on the PDP. TOUCH button Touch the printed names of each button using your finger to operate it. SOURCE button I/ Press to display all of the available video sources Press to turn the PDP on and off. (TV, AV1, AV2, AV3, S-VIDEO1, S-VIDEO2, COMPONENT1, COMPONENT2, PC, DVI). Power Indicator - Power Off: Blue MENU button Displa
Streszczenie treści zawartej na stronie nr. 7
BN68-00678A-01_002~23 2004.4.28 6:12 PM Page 7 Side of the TV S-Video Input Video Input Audio Input (L, R) Rear Panel ŒDVI INPUT (DVI-D / L-AUDIO-R) ØAV1, AV2, AV3 Connect to the digital video and audio (VIDEO / L-AUDIO-R ) output jack of a device with DVI output. Video and audio inputs for external devices, such as a camcorder or VCR. ´MONITOR OUT (VIDEO / L-AUDIO-R) Outputs for external devices. ∏COMPONENT1, COMPONENT2 Video (Y/Pb/Pr) and audio (L-AUDIO-R) ˇPC INPUT (RGB IN / AUDIO) in
Streszczenie treści zawartej na stronie nr. 8
BN68-00678A-01_002~23 2004.4.28 6:12 PM Page 8 Remote Control Buttons Remote Control ŒPOWER button Turns the PDP on and off. ´ASPECT button Press to change the screen size. ˇNumber buttons ¨+100 button Press to select channels over 100. For example, to select channel 121, press “+100”, then press “2” and “1.” ˆMUTE button Press to mute the PDP sound. ØVOL (Volume) buttons Use it to adjust volume. ∏SLEEP button Press to select a preset time interval for automatic shutoff. ”MENU button Displays
Streszczenie treści zawartej na stronie nr. 9
BN68-00678A-01_002~23 2004.4.28 6:12 PM Page 9 ¸SRS TSXT button Selects Trusurround XT mode. ˛ MTS button Press to choose stereo, mono or Separate Audio Pro- gram (SAP broadcast). ◊AUTO PROG. button The TV automatically cycles through all of the avail- able channels and stores them in memory. ±ADD/DEL button Press to add or delete channels in the TV’s memory. ≠DNIe button Activates DNIe (Digital Natural Image engine). –CAPTION button Controls the caption decoder. —SET button Used during set
Streszczenie treści zawartej na stronie nr. 10
BN68-00678A-01_002~23 2004.4.28 6:12 PM Page 10 Wall Installation Instructions This wall mount bracket installation guide is for the following models:HP-P4261 Installation Notes Do not install the PDP on any location other than a vertical wall. 1 To protect the performance of the PDP and prevent problems, avoid the following locations: 2 • Do not install next to smoke and fire detectors. • Do not install in an area subjected to vibration or high voltage. • Do not install near or around any
Streszczenie treści zawartej na stronie nr. 11
BN68-00678A-01_002~23 2004.4.28 6:12 PM Page 11 How to assemble the Wall Mount Bracket The wall mount comes packaged in 3 parts. These parts must be assembled together. Please tighten the captive screw in the direction of the arrow after assembling 1 the bracket. Install the Wall Mount Bracket after the screws are securely inserted into the wall. Captive Screws ASSY-HINGE (LEFT) Wall Mount Bracket Separate ASSY-HINGE into Left and Right. ASSY-HINGE (RIGHT) After installing the Wall Mount
Streszczenie treści zawartej na stronie nr. 12
BN68-00678A-01_002~23 2004.4.28 6:12 PM Page 12 Wall Installation Instructions Fixing the PDP panel to the wall attachment panel bracket Remove the screws from the back of the PDP. 1 Connect insulation holders to screws (see the illustration below). 2 • If you are uncertain about installation, hire a specialist to install the wall mount bracket. • Be sure to check that the insulation holders are completely secured on both the left and right side after hanging the PDP on the wall mount brack
Streszczenie treści zawartej na stronie nr. 13
BN68-00678A-01_002~23 2004.4.28 6:12 PM Page 13 How to Adjust Mounting Angle Notice Notice : Please secure the mounting bracket on the wall surface after setting its angle at 0°. Factory default How to Adjust Mounting Angle Please tighten the captive screw in the direction Hold onto the middle of the PDP to adjust of the arrow after assembling the bracket. the angle (not the sides of the PDP). Change Angle Secure the SET to the wall mount bracket. (Please refer to the following instructions.
Streszczenie treści zawartej na stronie nr. 14
BN68-00678A-01_002~23 2004.4.28 6:12 PM Page 14 How to assemble the Stand-Base Assemble two support pins with the stand base and firmly secure both sides of the support pins using 8 screws provided. 1 Assemble the PDP with the stand and firmly secure the PDP using 4 screws provided. 2 Warning Firmly secure the stand for the PDP before moving it, as the stand may fall and could cause serious injury. Two or more people should carry the PDP. Never lay the PDP on the floor because of possible
Streszczenie treści zawartej na stronie nr. 15
BN68-00678A-01_002~23 2004.4.28 6:12 PM Page 15 PLASMA DISPLA Y P ANEL Connections Connecting VHF and UHF Antennas ..............................................16 Connecting Cable TV....................................................................17 Connecting a VCR........................................................................19 Connecting a Camcorder ..............................................................20 Connecting a DVD Player.........................................
Streszczenie treści zawartej na stronie nr. 16
BN68-00678A-01_002~23 2004.4.28 6:12 PM Page 16 Connecting VHF and UHF Antennas Antennas with 75-ohm Round Leads If your antenna looks like this: it has 75-ohm round leads. Plug the antenna lead into the VHF/UHF terminal on the PDP. 1 Use the Antenna Cable, an accessory included in the product package. 16
Streszczenie treści zawartej na stronie nr. 17
BN68-00678A-01_002~23 2004.4.28 6:12 PM Page 17 Connecting Cable TV You can connect different cable systems to your PDP, including cable without a cable box, and cable with a cable box that descrambles some or all channels. Cable without a Cable Box Plug the incoming cable into the VHF/UHF terminal on the PDP. 1 Use the Antenna Cable, an accessory included in the product package. Cable with a Cable Box that Descrambles All Channels Find the cable connected to the ANTENNA OUT terminal on
Streszczenie treści zawartej na stronie nr. 18
BN68-00678A-01_002~23 2004.4.28 6:12 PM Page 18 Cable with a Cable Box that Descrambles Some (But Not All) Channels To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial cables (which you can buy from your Samsung dealer or any electronics store). Find and disconnect the cable that is connected to the ANTENNA IN terminal of 1 your cable box. This terminal might be labeled "ANT IN", "VHF IN" or simply, "IN". Connect this cable to a two-way split
Streszczenie treści zawartej na stronie nr. 19
BN68-00678A-01_002~23 2004.4.28 6:12 PM Page 19 Connecting a VCR Connecting a VCR to the Video or S-Video/Audio jack PDP VCR Power Plug Audio Cable S-Video Cable Video Cable How to Connect Connect the Video/Audio cables between the VIDEO or S-VIDEO / L - AUDIO - R jacks on the PDP and VIDEO or S-VIDEO / L - AUDIO - R output jacks on the VCR. (Note: For better video, you can use an S-Video cable.) Videotape Playback: 1. Turn on your PDP. 2. Press the SOURCE button to select “Video(AV1, AV2 or
Streszczenie treści zawartej na stronie nr. 20
BN68-00678A-01_002~23 2004.4.28 6:12 PM Page 20 Connecting a Camcorder Viewing camcorder tapes S-Video Cable Camcorder PDP(SIDE AV3) PDP REAR PANEL Audio Cable Power Plug Video Cable How to Connect Connect a Video/Audio cable between the VIDEO or S-VIDEO / L - AUDIO - R jacks on the PDP and the VIDEO or S-VIDEO /AUDIO output jacks on the camcorder. (Note: For better video, you can use an S-VIDEO cable) Viewing Tapes 1. Turn on your PDP. 2. Press the SOURCE button to select “Video(AV1, AV2 or
