Streszczenie treści zawartej na stronie nr. 1
Internal Use Only
North/Latin America http://aic.lgservice.com
Europe/Africa http://eic.lgservice.com
Asia/Oceania http://biz.lgservice.com
LED LCD TV
SERVICE MANUAL
CHASSIS : LD21A
MODEL: 22LS3500/350S/350T/3510
22LS3500/350S/350T-ZA 22LS3510-ZB
22LS3590/359S/359T
22LS3590/359S/359T-ZC
CAUTION
BEFORE SERVICING THE CHASSIS,
READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
P/NO : MFL67360715 (1202-REV00) Printed in Korea
Streszczenie treści zawartej na stronie nr. 2
CONTENTS CONTENTS .............................................................................................. 2 SAFETY PRECAUTIONS ........................................................................ 3 SERVICING PRECAUTIONS ................................................................... 4 SPECIFICATION ...................................................................................... 6 ADJUSTMENT INSTRUCTION ............................................................... 9 BL
Streszczenie treści zawartej na stronie nr. 3
SAFETY PRECAUTIONS IMPORTANT SAFETY NOTICE Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and Exploded View. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer. General Guidance Leakage Current Hot Check
Streszczenie treści zawartej na stronie nr. 4
SERVICING PRECAUTIONS CAUTION: Before servicing receivers covered by this service 2. After removing an electrical assembly equipped with ES manual and its supplements and addenda, read and follow the devices, place the assembly on a conductive surface such as SAFETY PRECAUTIONS on page 3 of this publication. aluminum foil, to prevent electrostatic charge buildup or expo- NOTE: If unforeseen circumstances create conflict between the sure of the assembly. following servicing precautions and any
Streszczenie treści zawartej na stronie nr. 5
IC Remove/Replacement 3. Solder the connections. Some chassis circuit boards have slotted holes (oblong) through CAUTION: Maintain original spacing between the replaced which the IC leads are inserted and then bent flat against the cir- component and adjacent components and the circuit board to cuit foil. When holes are the slotted type, the following technique prevent excessive component temperatures. should be used to remove and replace the IC. When working with boards using the familiar r
Streszczenie treści zawartej na stronie nr. 6
SPECIFICATION NOTE : Specifications and others are subject to change without notice for improvement. 1. Application range 3. Test method This specification is applied to the LCD TV used LD21A 1) Performance: LGE TV test method followed chassis. 2) Demanded other specification - Safety : CE, IEC specification - EMC : CE, IEC 2. Requirement for Test Each part is tested as below without special appointment. 1) Temperature: 25 °C ± 5 °C(77 °F ± 9 °F), CST: 40 °C ± 5 °C 2) Relative Humidity: 65 %
Streszczenie treści zawartej na stronie nr. 7
No. Item Specification Remarks 1) PAL-BG 2) PAL-DK 2 Broadcasting system 3) PAL-I/I’ 4) SECAM L/L’ 5) DVB-T/T2/C/S ► DVB-T - Guard Interval(Bitrate_Mbit/s) 1/4, 1/8, 1/16, 1/32 - Modulation : Code Rate QPSK : 1/2, 2/3, 3/4, 5/6, 7/8 16-QAM : 1/2, 2/3, 3/4, 5/6, 7/8 64-QAM : 1/2, 2/3, 3/4, 5/6, 7/8 ► DVB-T2 - Guard Interval(Bitrate_Mbit/s) 1/4, 1/8, 1/16, 1/32, 1/128, 19/128, 19/256, - Modulation : Code Rate QPSK : 1/2, 2/5, 2/3, 3/4, 5/6 Analog : Upper Heterodyne 16-QAM
Streszczenie treści zawartej na stronie nr. 8
5. Video resolutions (2D) 5.1. Component Input (Y, CB/PB, CR/PR) No. Resolution H-freq(kHz) V-freq(Hz) Pixel clock(MHz) Proposed 1 720*576 15.625 50.00 13.5 SDTV ,DVD 576I 2 720*480 15.73 60.00 13.5135 SDTV ,DVD 480I 3 720*480 15.73 59.94 13.50 SDTV ,DVD 480I 4 720*576 31.25 50.00 27.00 SDTV 576P 5 720*480 31.50 60.00 27.027 SDTV 480P 6 720*480 31.47 59.94 27.00 SDTV 480P 7 1280*720 37.50 50.00 74.25 HDTV 720P 8 1280*720 45.00 60.00 74.25 HDTV 720P 9 1280*720 44.96 59.94 74.176 HDTV 720P 10 1920
Streszczenie treści zawartej na stronie nr. 9
5.3. HDMI Input(PC/DTV) No. Resolution H-freq(kHz) V-freq.(Hz) Pixel clock(MHz) Proposed Remark PC(DVI) DDC 1 640*350 31.468 70.09 25.17 EGA X 2 720*400 31.469 70.08 28.32 DOS O 3 640*480 31.469 59.94 25.17 VESA(VGA) O 4 800*600 37.879 60.31 40.00 VESA(SVGA) O 5 1024*768 48.363 60.00 65.00 VESA(XGA) O 6 1152*864 54.348 60.053 80.00 VESA O 7 1360*768 47.712 60.015 85.50 VESA (WXGA) O 8 1280*1024 63.981 60.020 108.0 VESA (SXGA) O FHD only 9 1920*1080 67.50 60.00 148.5 HDTV 1080P O FHD only DTV 1 7
Streszczenie treści zawartej na stronie nr. 10
ADJUSTMENT INSTRUCTION (4) Click "Connect" tab. If "Can't" is displayed, check connection 1. Application Range between computer, jig, and set. This specification sheet is applied to all of the LCD TV with LD21A chassis. (2) (3) 2. Designation (1) The adjustment is according to the order which is designated and which must be followed, according to the plan which can be changed only on agreeing. (2) Power adjustment : Free Voltage. (3) Magnetic Field Condition: Nil. (4) Input signal Un
Streszczenie treści zawartej na stronie nr. 11
3.1. ADC Process 3.3. EDID data (1) ADC (1) HD RGB EDID data (RGB input : only LD21B support) - Enter Service Mode by pushing "ADJ" key, 0 1 2 3 4 5 6 7 8 9 A B C D E F - Enter Internal ADC mode by pushing "►" key at "7. ADC 0 00 FF FF FF FF FF FF 00 1E 6D a b 10 c 01 03 68 10 09 78 0A EE 91 A3 54 4C 99 26 Calibration". 20 0F 50 54 A1 08 00 81 C0 61 40 45 40 31 40 01 01 EZ ADJUST ADC Calibration 30 01 01 01 01 01 01 1B 21 50 A0 51 00 1E 30 48 88 0. Tool Option1 ADC Comp 480i NG 40 35 00 A0 5A
Streszczenie treści zawartej na stronie nr. 12
* Connecting picture of the measuring instrument 3.4 Function Check (On Automatic control) - Check display and sound Inside PATTERN is used when W/B is controlled. Connect to ■ Check Input and Signal items. auto controller or push Adjustment R/C POWER ON -> Enter 1) TV the mode of White-Balance, the pattern will come out. 2) AV (SCART / CVBS) 3) COMPONENT (480i) 4) RGB (PC : 1024 x 768 @ 60hz) (* RGB input : LD21B only support) Full White Pattern CA-210 5) HDMI COLOR 6) PC Audio In (* exce
Streszczenie treści zawartej na stronie nr. 13
* Manual W/B process using adjust Remote control. 5. HI-POT Test ▪ After enter Service Mode by pushing "ADJ" key, 5.1. HI-POT auto-check preparation ▪ E nter White Balance by pushing " " key at "8. White ► - Check the POWER cable and SIGNAL cable insertion condition Balance". EZ ADJUST White Balance 5.2. HI-POT auto-check Cool Color Temp. 0. Tool Option1 (1) Pallet moves in the station. (POWER CORD / AV CORD is R-Gain 172 1. Tool Option2 G-Gain 172 2. Tool Option3 tightly inserted) B-Gain 19
Streszczenie treści zawartej na stronie nr. 14
6.3. Method & notice 7. MAC Address & CI+ key download (1) Serial number D/L is using of scan equipment. 7.1 MAC Address (2) Setting of scan equipment operated by Manufacturing 7.1.1 Equipment & Condition Technology Group. (3) Serial number D/L must be conformed when it is produced in ▪ Play file : Serial.exe production line, because serial number D/L is mandatory by ▪ MAC Address edit D-book 4.0. ▪ Input Start / End MAC address * Manual Download(Model Name and Serial Number) 7.1.2 Download
Streszczenie treści zawartej na stronie nr. 15
7.2 LAN Inspection 7.2.1. Equipment & Condition ▪ Each other connection to LAN Port of IP Hub and Jig 7.2.1. LAN inspection solution ▪ LAN Port connection with PCB ▪ Network setting at MENU Mode of TV ▪ Setting automatic IP ▪ Setting state confirmation -> If automatic setting is finished, you confirm IP and MAC Address. 7.3. LAN PORT INSPECTION(PING TEST) Connect SET -> LAN port == PC -> LAN Port SET PC 7.3.1. Equipment setting (1) Play the LAN Port Test PROGRAM. (2) Input IP set up for an ins
Streszczenie treści zawartej na stronie nr. 16
BLOCK DIAGRAM CI Slot Copyright © LG Electronics. Inc. All rights reserved. LGE Internal Use Only - 16 - Only for training and service purposes LVDS X-tal 24M FFC(HD 30P) X201 (HD 50Hz) ATV : IF +/ - SI2176 TU_CVBS SERIAL FLASH SPI IC1401 (8Mbit) SIF MX25L8006EM2I -12G DDR3 (1Gbit) DDR3 Add. TMDS IC1201 HDMI1/2(DVI) DDR3 Data K4B1G1646G BCK0 SERIAL FLASH I2C CVBS, Y/ Pb/Pr, L/R Component/AV IC104 ( 256Kbit) COMMON R1EX2425BSAS0A NAND FLASH IC102 (1Gbit) K9F1G08U0D- SCB0 PCM_A[0:7] L LG G2
Streszczenie treści zawartej na stronie nr. 17
EXPLODED VIEW IMPORTANT SAFETY NOTICE Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and EXPLODED VIEW. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent X-RADIATION, Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer. Copyright © LG Electronics. In
Streszczenie treści zawartej na stronie nr. 18
LED Driver Circuit for TN Module DMB IC +24V_LED_driver +12V/+15V LED_DRIVER D59001 CMI_21.6 CMI_18.51 LED_DRIVER L59001 L59002 PDS5100H-13 CIS21J121 CIS21J121 L59000 ILED = 1240/RISET 33uH LED_DRIVER R59006 Module ILED spec R59002 R59003 Remark 100 LED_DRIVER OPT LED_DRIVER C59004 C59005 WLED_ENABLE C59003 2.2uF 4.7uF 2.2uF 65mA_Typ 100V 50V LED_DRIVER LED_DRIVER 100V CMI_18.51_HD 620Kohm 39Kohm 70mA_Max 67.06mA C59002 R59008 100pF 100K 50V 65mA_Typ LED_DRIVER CMI_21.6_HD 620Kohm 39Kohm 67.06mA
Streszczenie treści zawartej na stronie nr. 19
AVDD_DDR0 AVDD_DDR0 AVDD_DDR0 AVDD_DDR0 +1.5V_DDR AVDD_DDR0 L1202 CIC21J501NE A-MVREFDQ B-MVREFDQ B-MVREFCA A-MVREFCA OPT CLose to Saturn7M IC CLose to Saturn7M IC CLose to DDR3 CLose to DDR3 IC1201-*1 IC1202-*1 K4B1G1646G-BCH9 K4B1G1646G-BCH9 DDR_1333_SS_NEW DDR_1333_SS_NEW N3 M8 N3 M8 A0 VREFCA A0 VREFCA P7 P7 A1 A1 P3 P3 A2 A2 N2 H1 N2 H1 A3 VREFDQ A3 VREFDQ P8 P8 A4 A4 P2 P2 A5 A5 R8 L8 R8 L8 A6 ZQ A6 ZQ R2 R2 A7 A7 T8 T8 A8 A8 R3 B2 R3 B2 A9 VDD_1 A9 VDD_1 L7 D9 L7 D9 A10/AP VDD_2 A10/AP VD
Streszczenie treści zawartej na stronie nr. 20
Serial Flash for SPI boot +3.5V_ST +3.5V_ST S_FLASH_MAIN_MACRONIX OPT IC1401 R1404 4.7K MX25L8006EM2I-12G +3.5V_ST OS C1401 0.1uF CS# VCC 1 8 /SPI_CS OPT R1403 SO/SIO1 HOLD# 10K 2 7 SPI_SDO WP# SCLK 3 6 /FLASH_WP SPI_SCK R1405 OPT GND SI/SIO0 33 C R1401 4 5 SPI_SDI 0 OPT OS B Q1401 MMBT3904(NXP) E S_FLASH_MAIN_WINBOND IC1401-*1 W25Q80BVSSIG CS VCC 1 8 DO[IO1] HOLD[IO3] 2 7 %WP[IO2] CLK 3 6 GND DI[IO0] 4 5 THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PR
