Streszczenie treści zawartej na stronie nr. 1
User’s Guide
W2363V
Make sure to read the Important Precautions before using the
product. Keep the User's Guide(CD) in an accessible place for future
reference.
See the label attached on the product and give the information to
your dealer when you ask for service.
Streszczenie treści zawartej na stronie nr. 2
Important Precautions This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national stan
Streszczenie treści zawartej na stronie nr. 3
Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures wh
Streszczenie treści zawartej na stronie nr. 4
Important Precautions On Cleaning Unplug the display before cleaning the face of the display screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not use chemicals such as benz
Streszczenie treści zawartej na stronie nr. 5
Accessories !!! Thank for selecting LGE products !!! Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Power Cord User's Guide/Cards (Depending on the country) 15-pin D-Sub Signal Cable DVI-D Signal Cable (To set it up, this signal cable may (This feature is not available be attached to this product before in all countries.) shipping out.) IMPORTANT This accessories may look different from those shown here. User must use shielde
Streszczenie treści zawartej na stronie nr. 6
Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connecting and Disassembling the stand 1. Place the monitor face down on the soft cloth. 2. Assemble the Stand Base into the Stand Body in the correct direction. Make sure you push the Stand Base until the end. Stand Body Stand Base The Stand Base may fall and get damaged or cause injury. Good Connection Bad Connection 5
Streszczenie treści zawartej na stronie nr. 7
Connecting the Display 3. Turn the screw to the right to fix the Stand Body to the Stand Base. Screw Turn the screw by using the screw handle. 4. Then fold the screw handle flat. 5. Once assembled take the monitor up carefully and face the front side. 6. To disconnect the Stand Base from the Stand Body, unfold the screw handle and turn it to the left. IMPORTANT This picture depicts the general model of connection. Your monitor may differ from the items shown in the picture. Do not carry the pro
Streszczenie treści zawartej na stronie nr. 8
Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display After installation, adjust the angle as shown below. 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range: -5˚~15˚ -5 15 Do not touch or press the screen when adjusting the angle of the monitor. When adjusting the angle of the screen, do not put your finger
Streszczenie treści zawartej na stronie nr. 9
Connecting the Display Connecting with the PC/AV equipment 1. Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. 2. Connect signal input cable and power cord in order, then tighten the screw of 1 2 the signal cable. A Connect DVI-D (Digital signal) Cable B Connect D-sub (Analog signal) Cable C Connect VIDEO and AUDIO Cable D Connect HDMI Cable (HDMI1, HDMI2) NOTE This is a simplified representation
Streszczenie treści zawartej na stronie nr. 10
Connecting the Display 3. Press the Power Button ( ) on the front panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. (Only Analog Mode) NOTE ‘ Self Image Setting Function’? This function provides the user with optimal display settings. When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. ‘AUTO/SET’ Function? When you en
Streszczenie treści zawartej na stronie nr. 11
Control Panel Functions Front Panel Controls Button Use this button to enter THRU MODE, SRS TRUSURROUND HD, ARC or AUTO BRIGHT menus. For more information, refer to page 14 ~ 15. When two or more input signals are connected, first SOURCE Button monitor automatically detects one signal as main input, then you can select the input signal (DSUB/DVI/HDMI1/ HDMI2/COMPONENT) you want. INPUT Use this button to enter or exit the On Screen Display. MENU Button OSD LOCKED/UNLOCKED This function allows yo
Streszczenie treści zawartej na stronie nr. 12
Control Panel Functions Use these buttons to select or adjust functions in the On Buttons Screen Display. Use this button you can directly use PIP function. You can use PIP menu to select PIP input. For more information, refer to page 21. When two input signals are connected, one is main input, the other is PIP input. You can use this button to exchange the main input and PIP input. AUTO/SET Use this button to enter a selection in the On Screen Display. Button AUTO IMAGE ADJUSTMENT When adjusti
Streszczenie treści zawartej na stronie nr. 13
On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. To make adjustments in the On Screen Display, follow these steps: Move where Select a Adjust the Exit
Streszczenie treści zawartej na stronie nr. 14
On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. Main menu Sub-menu Reference Use Frame-Buffer to prevent THRU MODE picture delay Use 3D surround for live sound SRS TRUSURROUND HD effect Use aspect ratio control ARC To control screen brightness AUTO BRIGHT automatically BRIGHTNESS To adjust the brightness, contrast CONTRAST and gamma of the screen GAMMA PICTURE To set offset level BLACK LEVEL To adjus
Streszczenie treści zawartej na stronie nr. 15
On Screen Display(OSD) Selection and Adjustment The OSD screen will appear when you press the button on the front of the monitor. Menu Name G-MODE MENU : Save & Exit Icons , : Move Sub-menu Name THRU MODE ON Main menu Sub menu Description ON THRU MODE G-MODE Not use the Frame-Buffer memory to prevent the picture delay. It can use in GAME MODE to prevent picture delay. THRU MODE ON OFF Using the Frame-Buffer memory to control PIP, ARC function. If user selects “THRU MODE ON” with “PIP ON”,
Streszczenie treści zawartej na stronie nr. 16
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description 1:1 G-MODE ARC The picture will be displayed depends on Input resolution.No Scaling. If 640x480 resolution input, the picture will just ARC FULL display 640x480 size even though the 1920x1080 size panel. ORIGINAL The picture will be displayed with input resolution ratio scaling. If 640x480 resolution input, the picture will keep at 4:3 ratio scaling. FULL The picture will be displayed with Full size. AUTO BRIGHT To c
Streszczenie treści zawartej na stronie nr. 17
On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears. Main Menu MENU : Exit : Adjust (Decrease/Increase) SET : Enter : Select another sub-menu : Restart to select sub-menu Button Tip Menu Name Sub-menus Icons NOTE OSD (On Screen Display)
Streszczenie treści zawartej na stronie nr. 18
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PICTURE DVI, DSUB input BRIGHTNESS To adjust the brightness of the screen. CONTRAST To adjust the contrast of the screen. GAMMA Set your own gamma value: -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display blackish images. HDMI, COMPONENT input BLACK LEVEL You can set the offset level. If you select 'HIGH', the screen will be bright and if you select ‘LOW’, the screen will
Streszczenie treści zawartej na stronie nr. 19
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description COLOR DVI, DSUB input PRESET • sRGB: Set the screen color to fit the sRGB standard color specification. • 6500K: Slightly reddish white. • 9300K: Slightly bluish white. RED Set your own red color levels. GREEN Set your own green color levels. BLUE Set your own blue color levels. HUE Set your own HUE levels. SATURATION Set your own saturation levels. COLOR RESET Prestore “PICTURE” and “COLOR” default settings. HDMI, C
Streszczenie treści zawartej na stronie nr. 20
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description TRACKING DSUB input HORIZONTAL To move image left and right. VERTICAL To move image up and down. CLOCK To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. PHASE To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. DVI, HDMI, COMPONENT input SHARPNESS To adjust the clear
