Streszczenie treści zawartej na stronie nr. 1
42 inch Digital / Analog
PLASMA DISPLAY TV
Owner’s Manual
6842THG
INPUT
POWER SLEEP SELECT
1 2 3
4 5 6
AUDIO
7 8 9
STILL
- 0
SCREEN
SETUP MODE
ENTER
INFO
BACK
CH RETURN
VOL. CH
MUTE
TO RECEIVE DIGITAL/ANALOG SIGNAL,
YOU MUST CONNECT ANTENNA.
HIGH-DEFINITION TELEVISION
By changing the screen display mode from time
to time, you can reduce burn-in on screen.
(Refer to “CHANGING THE SCREEN DISPLAY
MODE” on page 21.)
IF YOU NEED ADDITIONAL ASSISTANCE WITH SET-UP OR OPERATING AFTER
READING OWNER’S
Streszczenie treści zawartej na stronie nr. 2
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI- ANCE TO RAIN OR MOISTURE. THIS SYMBOL INDICATES THAT DANGER- CAUTION OUS VOLTAGE CONSTITUTING A RISK OF RISK OF ELECTRIC SHOCK ELECTRIC SHOCK IS PRESENT WITHIN DO NOT OPEN THIS UNIT. CAUTION: TO REDUCE THE RISK OF ELEC- THIS SYMBOL INDICATES THAT THERE TRIC SHOCK, DO NOT REMOVE COVER (OR BACK). ARE IMPORTANT OPERATING AND MAIN- NO USER SERVICEABLE PARTS INSIDE. REFER TENANCE INSTRUCTIONS IN THE LITERA- SERVICING TO
Streszczenie treści zawartej na stronie nr. 3
PRECAUTIONS • Place your TV in a room with adequate ventilation. • Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight. • Do not place your TV on soft surfaces, such as rugs or blankets. • Leave enough room for air to circulate around the bottom, top and back of the set. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly ap
Streszczenie treści zawartej na stronie nr. 4
SUPPLIED ACCESSORIES • Owner’s Manual • Simple Set Up Guide • Power Cable (1EMN21782) (1EMN21783) (WBC0192LW001) • Remote control unit • Batteries (NF000UD) (“AA” x 2) • If you need to replace these accessories, please refer to the PART NO, with the illustrations and call our help line mentioned on the front page. • Depending on your antenna system, you may need different types of Combiners (Mixer) or Separator (Splitter). Contact your local electronics store for these items. FEATURES • DTV/TV/C
Streszczenie treści zawartej na stronie nr. 5
ONTENTS C IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 SUPPLIED ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 FEATURES . . . . . . . . . . . . . . . . . . . . . . .
Streszczenie treści zawartej na stronie nr. 6
UNCTIONS F REMOTE CONTROL, FRONT AND REAR PANEL FUNCTION INPUT SELECT button (p20) SLEEP button (p23) To select TV or external input mode (to To turn the power off automatically at INPUT access DVD, VCR, etc.). preset time. POWER SLEEP SELECT POWER button (p13) AUDIO button (p19) To turn TV on/off. • Analog mode (TV) 1 2 3 To select audio mode. Channel number buttons (p18) • Digital mode (DTV) To select channels. 4 5 6 To select audio language. AUDIO SETUP button (p15) 7 8 9 To display on-screen
Streszczenie treści zawartej na stronie nr. 7
ANT. IN jack AUDIO OUT jacks Connect your antenna or cable Connect the supplied audio box here. from underneath cable here through the audio DIGITAL AUDIO OUT HDMI in jacks of audio equipment. ANT. IN (COAXIAL) jack AUDIO OUT AUDIO Connect an optional coaxial HDMI IN jacks L L digital audio cable here through Connect HDMI cable and DIGITAL HDMI IN AUDIO OUT R R the coaxial digital audio in jack audio cable coming from the (COAXIAL) of a decoder or audio receiver. HDMI and audio out jack of exte
Streszczenie treści zawartej na stronie nr. 8
REPARATION FOR USE P CONNECTION This section describes how to connect this TV to reception and other sources. MAKE SURE YOU HAVE AN ANTENNA. As DTV is only available over the air, you need an antenna to receive digital signal. NOTE: Be sure that antenna or cable is connected properly before plugging the power cord. [ANTENNA CABLE CONNECTION] 1) When connecting TV to antenna Connect the RF cable or antenna cable on your home outlet to the ANT. IN jack of this TV. 2) When connecting TV to RF/Incom
Streszczenie treści zawartej na stronie nr. 9
EXTERNAL CONNECTION [HDMI CONNECTION] 1) This is the best method to connect this TV to video devices with the HDMI output jack, such as DVD play- er with HDMI output jack, etc. It can minimize the deterioration of image quality. Use the HDMI cable (commercially available) for connection. To HDMI INPUT jack HDMI ANT. IN HDMI OUT AUDIO OUT AUDIO L L DIGITAL HDMI IN To HDMI output jack AUDIO OUT R R DVD Player with the HDMI output jack (COAXIAL) Cables not included Rear of this TV NOTES: This TV ac
Streszczenie treści zawartej na stronie nr. 10
[COMPONENT CONNECTION] 1) This is a better method to connect this TV to video devices with the Component output jack, such as DVD player, etc. Use the Component cable (commercially available) for connection. If you connect component output jack to COMPONENT1 input jack, connect an audio cable to AUDIO L/R jacks of COMPONENT1. If you connect component output jack to COMPONENT2 input jack, connect an audio cable to AUDIO L/R jacks of COMPONENT2. To COMPONENT1 INPUT jacks To component video outpu
Streszczenie treści zawartej na stronie nr. 11
[ANALOG AUDIO/VIDEO CONNECTION] 1) This is the general method to connect this TV to video devices with the video and audio output jacks, such as VCR, Camcorder, Video Game, etc.. When the audio jack of video devices is monaural, connect this TV to the Audio L jack. If you connect video output jack to VIDEO1 input jack, connect an audio cable to AUDIO L/R jacks of VIDEO1. If you connect video output jack to VIDEO2 input jack, connect an audio cable to AUDIO L/R jacks of VIDEO2. Side of this TV To
Streszczenie treści zawartej na stronie nr. 12
[AUDIO OUTPUT CONNECTION] 1) If you connect this TV to an external audio device, you can enjoy much more of the broadcasting pro- grams with the feeling of being at a live program. Use the Audio cable (commercially available) for connection. Rear of this TV HDMI ANT. IN AUDIO AUDIO OUT AUDIO IN L L DIGITAL HDMI IN AUDIO OUT R R (COAXIAL) Stereo system Cables not included To audio input jacks To AUDIO OUTPUT jacks CONNECTING THE POWER CABLE Connect the power cable to this TV after connecting the
Streszczenie treści zawartej na stronie nr. 13
NITIAL SETTINGS I Hint: Before starting initial setup you must connect antenna. INITIAL SETTINGS K L 4 Select destination of ANT IN jack using [ / ], This section describes the initial settings when you press [ENTER]. first turn on the power after purchase. The initial setting items are shown below. Initial Setup Initial Setup Make sure the antenna is connected to "ANT. IN" jack. Air • LANGUAGE SELECTION Select the destination of "ANT. IN" jack. Cable Air You can select the menu language displ
Streszczenie treści zawartej na stronie nr. 14
HANNEL SETTINGS C AUTOSCAN K L 3 For TV channels, using [ / ], select “Air”. If you switch wires (e.g. between antenna and For CATV channels, select “Cable”. CATV) or if you move the TV to a different area A Autoscan utoscan after the initial setting, you need to perform Back Autoscan will rescan all channels. This may take a while to complete. Autoscan again. This function lets you easily select Air Select the destination of "ANT. IN" jack. Cable K L the receivable channels with [CH / ] and the
Streszczenie treści zawartej na stronie nr. 15
CHANNEL LIST MANUAL REGISTER The Channel List function lets you skip the unnec- You can register remainder of channels that were essary channels from the Channel registration list. not scanned by the Autoscan function due to the STILL bad reception status at the initial setting. - 0 SCREEN SETUP SETUP MODE 1 1 2 2 3 3 4 4 5 5 6 6 ENTER ENTER AUDIO 7 7 8 8 9 9 INFO BACK STILL - - 0 0 SCREEN SETUP SETUP MODE 1 Display the setup screen. • Press [SETUP]. ENTER ENTER The following setup screen is dis
Streszczenie treści zawartej na stronie nr. 16
• If the channel is set to external input, you can- ANTENNA CONFIRMATION not confirm the antenna situation. You can verify the signal strength of each channel Video1 to get a clearer picture. Antenna Antenna Back INPUT POWER SLEEP SELECT Indicator is available for antenna signal only. 1 1 2 2 3 3 4 4 5 5 6 6 CH Ch Change AUDIO 7 7 8 8 9 9 STILL 4 To exit the setup, press [SETUP]. - - 0 0 SCREEN SETUP SETUP MODE ENTER ENTER INFO BACK CH RETURN VOL. CH CH MUTE 1 Display the setup screen. • Press
Streszczenie treści zawartej na stronie nr. 17
LANGUAGE SELECTION SETTING THE PANEL PROTECTION You can choose your on screen language from one Panel protection prevents the display from being of the following English, Spanish or French. etched by an unchanging image. You can specify a STILL setting for it. - 0 STILL SCREEN SETUP SETUP MODE - 0 SCREEN SETUP SETUP MODE ENTER ENTER INFO BACK ENTER ENTER INFO BACK BACK CH RETURN CH RETURN VOL. CH MUTE VOL. CH MUTE 1 Display the setup screen. 1 Display the setup screen. • Press [SETUP]. The follo
Streszczenie treści zawartej na stronie nr. 18
ATCHING TV W NTSC ATSC 18:00 CHANNEL SELECTION CH4-1 No signal No signal K L You can select the channel by using either [CH / ] 18:30 or Channel number buttons. How to select the CH4-1 CH4-2 CH4-3 channel in each way is shown below. CH4 19:00 INPUT POWER SLEEP SELECT CH4-1 No signal CH4-3 19:30 1 1 2 2 3 3 CH4-1 CH4-2 No signal 4 4 5 5 6 6 20:00 AUDIO : changes automatically 7 7 8 8 9 9 STILL : change manually by pressing [CH / ] - - 0 0 on your remote control. SCREEN SETUP MODE NOTE: “
Streszczenie treści zawartej na stronie nr. 19
When the broadcasting has SAP and stereo STILL MODE audio... SAP / STEREO SAP / STEREO You can freeze the image shown on the screen. When the broadcasting has SAP and monaural 1 2 3 audio... 4 5 6 AUDIO SAP / MONO SAP / MONO 7 8 9 STILL STILL When the broadcasting is having only monaural - 0 SCREEN audio... SETUP MODE MONO (cannot be switched.) 1 Pausing image. 6 • Press [STILL], the image shown on the screen SAP / STEREO is paused. STEREO : Outputs stereo-audio Still SAP : Outputs second audio
Streszczenie treści zawartej na stronie nr. 20
SWITCHING EXTERNAL INPUT • When you press [INFO], the current external input mode, the type of resolutions for video When you connect external devices including a signal, TV aspect ratio CC and TV rating will be video cassette recorder and home audio system, displayed at the top-right of the screen. you can easily switch the input mode with the remote control. 1) When using VIDEO1 or S-VIDEO1 INPUT jack INPUT INPUT POWER SLEEP SELECT SELECT Video1 480i SD 480i SD 1 2 3 TV-PG DLSV CC CC 4 5 6 AUD
