Instrukcja obsługi SkyLink 318TRS

Streszczenie treści zawartej na stronie nr. 1

®
Skylink Lighting & Garage
Door Remote
Model 318TRS
1. INTRODUCTION
2. INSTALLATION OF GARAGE DOOR RECEIVER (CONT)
In this package, you will find a keychain transmitter with 12V al kaline battery,
2
Plug in the connector end of
a wireless switch receiver, a garage door receiver, a red / black wire, a
the Red/Black wire to the
mounting bracket and a clip.
318R receiver. Note the
Wireless Switch
orientation of the male &
Receiver
female connector.
Garage Door
Mounting
Receiver
Bracket
Clip
Key

Streszczenie treści zawartej na stronie nr. 2

5. CHANGE THE OPERATION CODE FOR 6. BATTERY BOTH TRANSMITTER AND RECEIVERS 12 volt alkaline battery (size 23A) Follow the instructions below if you want to change the operation code. (included). It is time to change the battery Pry off the battery 1 when the red LED on the trans- cover of the trans- mitter does not turn on when mitter with a coin, either button is pressed. as shown. BATTERY 2 You will see 9 connectors labeled from “1” to “9”, as shown. (the 7. ADDITIONAL TRANSMITTER connect