Instrukcja obsługi Broilmaster BL26P-1

Instrukcja obsługi dla urządzenia Broilmaster BL26P-1

Urządzenie: Broilmaster BL26P-1
Kategoria: Grill gazowy
Producent: Broilmaster
Rozmiar: 1.8 MB
Data dodania: 1/27/2014
Liczba stron: 24
Drukuj instrukcję

Pobierz

Jak korzystać?

Naszym celem jest zapewnienie Ci jak najszybszego dostępu do treści zawartych w instrukcji obsługi urządzenia Broilmaster BL26P-1. Korzystając z podglądu online możesz szybko przejrzeć spis treści i przejść do strony, na której znajdziesz rozwiązanie swojego problemu z Broilmaster BL26P-1.

Dla Twojej wygody

Jeżeli przeglądanie instrukcji Broilmaster BL26P-1 bezpośrednio na tej stornie nie jest dla Ciebie wygodne, możesz skorzystać z dwóch możliwych rozwiązań:

  • Przeglądanie pełnoekranowe - Aby wygodnie przeglądać instrukcję (bez pobierania jej na komputer) możesz wykorzystać tryp przeglądania pełnoekranowego. Aby uruchomić przeglądanie instrukcji Broilmaster BL26P-1 na pełnym ekranie, użyj przycisku Pełny ekran.
  • Pobranie na komputer - Możesz również pobrać instrukcję Broilmaster BL26P-1 na swój komputer i zachować ją w swoich zbiorach. Jeżeli nie chcesz jednak marnować miejsca na swoim urządzeniu, zawsze możesz pobrać ją w przyszłości z ManualsBase.
Broilmaster BL26P-1 Instrukcja obsługi - Online PDF
Advertisement
« Page 1 of 24 »
Advertisement
Wersja drukowana

Wiele osób woli czytać dokumenty nie na ekranie, lecz w wersji drukowanej. Opcja wydruku instrukcji również została przewidziana i możesz z niej skorzystać klikając w link znajdujący się powyżej - Drukuj instrukcję. Nie musisz drukować całej instrukcji Broilmaster BL26P-1 a jedynie wybrane strony. Szanuj papier.

Streszczenia

Poniżej znajdziesz zajawki treści znajdujących się na kolejnych stronach instrukcji do Broilmaster BL26P-1. Jeżeli chcesz szybko przejrzeć zawartość stron znajdujących się na kolejnych strinach instrukcji, możesz z nich skorzystać.

Streszczenia treści
Streszczenie treści zawartej na stronie nr. 1

i T ns alla TiOn i T ns T ruc iOns
MODELS MODELS
PCB1-2 BL26P-1
DCB1-2 SS26P-1
MODELS
BL48G-1
SS48G-1
B101652
vErify thAt All pArtS liStEd on thE ExplodEd viEw of thiS mAnuAl hAvE bEEn inCludEd in
thiS CArton bEforE bEginning inStAllAtion.
CAution: uSE CAution whEn hAndling pArtS, AS thEy mAy ContAin ShArp EdgES.
work glovES ArE rECommEndEd to prEvEnt injury.
Keep This Owner ’s Manual FOr FT u ure r eFerence .
EmpirE Comfort SyStEmS, inC • 918 frEEburg AvE. • bEllEvillE, il 62220
B101586-

Streszczenie treści zawartej na stronie nr. 2

tAblE of ContEntS CongrAtulAtionS! You have chosen the finest grill for your outdoor cooking pleasure. Please take time to read this entire manual before as- ® sembling your Broilmaster Grill accessory. Important Information ..........................................................................................................4 PCB1-2, DCB1-2 Installation Instructions .......................................................................5-10 Cart Exploded View & Parts List .........

Streszczenie treści zawartej na stronie nr. 3

thiS gAS ACCESSory iS dESignEd for outdoor uSE only IMPORTANT: This manual should be read thoroughly by the person installing the grill mounting and all persons who will use and maintain the grill mounting. The installer should be sure the manual is left in the possession of the user. The user should retain this manual for future reference when using or cleaning the grill mounting and to properly identify any repair parts that may be required. WARNING: Reference this manual for proper inst

Streszczenie treści zawartej na stronie nr. 4

i MpOT r T an inFOM r a TiOn Grill Location gas Types ® Broilmaster Gas Grills are designed for outdoor use Never use liquid propane gas with a grill designed for ONLY. natural gas, or natural gas with a grill designed for liquid propane gas. The type of gas required for your grill is These mounting accessories are designed for use with defined on its product identification label. Questions ® Broilmaster gas grills and must not be used with any regarding different types of gases shoul

Streszczenie treści zawartej na stronie nr. 5

pCb1-2, dCb1-2 i T ns alla TO i n i T ns T ruc iOns vErify thAt All pArtS liStEd on thE ExplodEd viEw of thiS mAnuAl hAvE bEEn inCludEd in thiS CArton bEforE bEginning inStAllAtion. CAution: uSE CAution whEn hAndling pArtS, AS thEy mAy ContAin ShArp EdgES. work glovES ArE rECommEndEd to prEvEnt injury. rEmovE protECtivE CoAting And vErify thAt All pArtS liStEd on thE ExplodEd viEw of thiS mAnuAl hAvE bEEn inCludEd bEforE bEginning ASSEmbly. toolS rEquirEd: phillipS SCrEw drivEr (An ElECtri

Streszczenie treści zawartej na stronie nr. 6

CArt ExplodEd viEw & pArtS liSt 4 11 6 12 13 10 3 5 2 1 7 9 8 Remove protective coating from stainless steel parts starting at pop rivets and verify that all parts listed in the exploded view on this page have been included before beginning this installation. Caution: Use caution when handling parts, as they may contain sharp edges. Work gloves are recommended to prevent injury. PART NO. INDEX Q3PK1 DESCRIPTION NO. PCB1 DCB1 H4PK1 H3PK1 1 B101585 B101584 B101584 Front Panel 2 B101651 B1

Streszczenie treści zawartej na stronie nr. 7

CArt hArdwArE pACkAgE 10-24 KEPS NUT PHILLIPS TRUSS HEAD SCREW 1/4-20 X 3/4 1/4-20 WING NUT HEX HEAD BOLT 1/4-20 X 3/4 ½ SNAP BUSHING 1/4-20 HEX NUT 1/4 ID X 1/2 OD LOCK WASHER PHILLIPS TRUSS HEAD SCREW 1/4-20 X 1 1/4 PHILLIPS SCREW 10-24 X 1/2 1/4 ID X 5/8 OD FLAT WASHER Note: Hardware shown at actual size where possible. Description Stainless Steel Black Qty Part No. Part No. Supplied PHILLIPS TRUSS HEAD SCREW 1/4-20 X 3/4 B072217 B072220 8 HEX HEAD BOLT 1/4-20 X 3/4 B063096 B063096 4 1/4-20

Streszczenie treści zawartej na stronie nr. 8

CArt ASSEmbly 3. Align the holes on the front and side panel assemblies and Caution: Be careful when handling parts, as they may secure with six #10-24 x 1/2” Phillips screws and 10-24 Keps contain sharp edges. Work gloves are recommended to prevent Nuts provided (3 on each side). Do not tighten these screws injury. Remove protective plastic covering. until all are installed. Use black screws for black carts and stainless steel screws for stainless steel carts. See Figures 2 1. For St

Streszczenie treści zawartej na stronie nr. 9

CArt ASSEmbly 5. Attach Rear Brace to the Left and Right Side Assemblies with two 1/4-20 x 3/4” Phillips Truss Head screws and 1/4-20 Hex nuts. See Figure 5. Important: Make sure the brace goes in the cutout of the support bracket. Figure 5 6. Insert bushing in the front panel on the right for P and H series and on the left for R and T series grills. Install rubber guard over cart cut out. See Figure 6. Figure 7 8. Attach the Heat Shield to the Left and Right side assemblies with two 1/4-

Streszczenie treści zawartej na stronie nr. 10

CArt ASSEmbly 9. For Grill Heads other than R3 Series, continue on to Step 10. 10. Mount the tank retainer to the cart by using 1/4-20 x 1 1/4 Phil- lips Truss Head screw and 1/4-20 wing nut. For R3 Series Grill Heads: Press in the two sides of the Control Housing (provided with Grill Head) and fit it into the opening under the grill head as shown in Figure 10. Grill Assembly will look like Figure 11. Note: It may be easier to insert one side of the control housing first, and then p

Streszczenie treści zawartej na stronie nr. 11

bl26p-1, SS26p-1 pAtio bASE i nsT alla TiOn i nsTT ruc iOns wArning: thiS pAtio bASE iS not dESignEd for uSE with An lp gAS CylindEr. wArning: SEE your grill ownEr'S mAnuAl for propEr loCAtion, minimum ClEArAnCES, And othEr importAnt SAfEty informAtion bEforE proCEEding with inStAllAtion of thiS ap TO i pOsT . vErify thAt All pArtS liStEd on thE ExplodEd viEw of thiS mAnuAl hAvE bEEn inCludEd in thiS CArton bEforE bEginning inStAllAtion. CAution: uSE CAution whEn hAndling pArtS, AS thEy mAy C

Streszczenie treści zawartej na stronie nr. 12

pAtio bASE ExplodEd viEw & pArtS liSt 3.08 8 9 2.63 Remove protective coating from stainless steel parts starting at pop rivets and verify that all parts listed in the exploded view on this page have been included before beginning this installation. Caution: Use caution when handling parts, as they may contain sharp edges. Work gloves are recommended to prevent injury. PART NO. INDEX NO. DESCRIPTION SS26P BL26P 1 B101660 B101644 Post Assembly 2 B101760 B101760 Upper Bracket Assembly 3 B1

Streszczenie treści zawartej na stronie nr. 13

pAtio bASE hArdwArE pACkAgE HEX HEAD SCREW 1/4-20 X 1 1/2 HEX HEAD BOLT 1/4-20 X 3/4 1/4 ID X 1/2 OD LOCK WASHER 1/4 ID X 5/8 OD FLAT WASHER HEX HEAD SCREW 10 X 1/2 HEX HEAD SCREW 10 X ½ SELF DRILL Note: Hardware shown at actual size where possible. Description Stainless Steel Black Quantity Notes Part No. Part No. Supplied HEX HEAD SCREW 1/4-20 X 1 1/2 B100112 B100112 4 1/4 ID X 1/2 OD LOCK WASHER B100139 B100139 4 HEX HEAD SCREW 10 X 1/2 SELF DRILL B101569 N/A 12 SS26P-1 Models Only HEX HEAD B

Streszczenie treści zawartej na stronie nr. 14

pAtio bASE inStAllAtion 2. Fasten the bottom of the post to the cast base using 1/4 x 1/2 NOTICE: Assemble post before assembling grill. Lock Washers, and 1/4-20 x 1 1/2 Hex Head bolts. See Figure 2. Anchor the cast iron patio base to your patio using the two holes The SS26P and BL26P Patio Bases are only for use with Broilmaster provided in the base. (Hardware not included) Gas Grills. Before proceeding with installation read your Owner’s Note: Make sure that the large rectangular cut

Streszczenie treści zawartej na stronie nr. 15

pAtio bASE inStAllAtion 5. For Grill Heads other than R3 Series, continue on to Step 6. 7. Position the grill head onto the post and fasten with ¼-20 x ¾ For R3 Series Grill Heads: Bend the tabs on the Post Cover Hex Head Screws and 1/4 x 5/8 Flat Washers. See Figure 7. Plate to 90° as shown in Figure 5. Two different size cover plates are included with the R3 Series Grill Heads. Choose the plate that will best fit your post. Note: If using the stainless steel Post Cover Plate, bend the

Streszczenie treści zawartej na stronie nr. 16

pAtio bASE inStAllAtion 9. Install the post access door and grease cup as shown in Figures 9 and 10. Figure 9 STEP #1 STEP #2 STEP #4 STEP #3 NOTE: GAS LINE REMOVED FOR CLARITY Figure 10 10. Continue assembly as directed by the Owner’s Manual pack- aged with the grill head. Page 16 B101586-7-1012

Streszczenie treści zawartej na stronie nr. 17

bl48g-1, SS48g-1 onE piECE in-ground poSt b101652 two piECE in-ground poSt i nsT alla TiOn i nsTrucTiOns wArning: thiS in-ground poSt iS not dESignEd for uSE with An lp gAS CylindEr. wArning: SEE your grill ownEr’S mAnuAl for propEr loCAtion, minimum ClEArAnCES, And othEr importAnt SAfEty informAtion bEforE proCEEding with inStAllAtion of thiS in-ground O p sT . vErify thAt All pArtS liStEd on thE ExplodEd viEw of thiS mAnuAl hAvE bEEn inCludEd in thiS CArton bEforE bEginning inStAllAtion.

Streszczenie treści zawartej na stronie nr. 18

in-ground poSt ExplodEd viEw & pArtS liSt 3.08 6 8 5 9 Remove pRotective tingcoa fRom ainlessst steel R ap ts aR st ting ta pop Rivets and veRify ttha all aR p ts listed in the exploded view on this agep veha been included R befo e beginning this tionallainst . c auTiOn : u se caution when handling aR p ts , as they yma aincont shaRp edges . w oRk gloves aRe Recommended ot pRevent R inju y . INDEX NO. PART NUMBER DESCRIPTION SS48G B101652 BL48G 1 B101674 - B101672 Post Assembly 2 B101760 B1017

Streszczenie treści zawartej na stronie nr. 19

in-ground hArdwArE pACkAgE HEX HEAD SCREW 10 X 1/2 SELF DRILL HEX HEAD BOLT 1/4-20 X 3/4 1/4 ID X 5/8 OD FLAT WASHER HEX HEAD SCREW 10 X 1/2 BLACK Note: Hardware shown at actual size where possible. Description Stainless Black Quantity Notes Steel Part No. Part No. Supplied HEX HEAD SCREW 10 X 1/2 SELF DRILL B101569 N/A 4 SS48G-1 Models Only HEX HEAD BOLT 1/4-20 X 3/4 B063096 B063096 4 1/4 ID X 5/8 OD FLAT WASHER B076332 B076332 4 HEX HEAD SCREW 10 X 1/2 BLACK N/A R2737 4 BL48G-1 Models Only B10

Streszczenie treści zawartej na stronie nr. 20

in-ground poSt ASSEmbly The gas supply line should be installed according to local NOTICE: Assemble and install patio base before assem- codes to prevent damage from digging. CAUTION: The bling grill. gas supply line must be regulated (In the case of Natural gas that means connected after your gas meter and regulator) The SS48G and BL48G In-Ground Posts are only for use with and that you have an easily accessible shut-off valve. Broilmaster Gas Grills. Before proceeding with installation rea


Podobne instrukcje
# Instrukcja obsługi Kategoria Pobierz
1 Broilmaster B101652 Instrukcja obsługi Grill gazowy 179
2 Broilmaster B100847-1-0109 Instrukcja obsługi Grill gazowy 52
3 Broilmaster BHAX-1 Instrukcja obsługi Grill gazowy 22
4 Broilmaster BL26P-1 Instrukcja obsługi Grill gazowy 15
5 Broilmaster BBA-1 Instrukcja obsługi Grill gazowy 47
6 Broilmaster BDA-1 Instrukcja obsługi Grill gazowy 0
7 Broilmaster BPB26-1 Instrukcja obsługi Grill gazowy 1
8 Broilmaster B101586-4-0112 Instrukcja obsługi Grill gazowy 1
9 Broilmaster BP48-1 Instrukcja obsługi Grill gazowy 0
10 Broilmaster BL48G-1 Instrukcja obsługi Grill gazowy 2
11 Broilmaster BHA-1 Instrukcja obsługi Grill gazowy 1
12 Broilmaster BRB-1 Instrukcja obsługi Grill gazowy 2
13 Broilmaster B101652 Instrukcja obsługi Grill gazowy 5
14 Broilmaster BBA-1 Instrukcja obsługi Grill gazowy 4
15 Broilmaster BHAX-1 Instrukcja obsługi Grill gazowy 2
16 12Volt Olympus Visera PEF-V Instrukcja obsługi Grill gazowy 6
17 2JANE iPAQ Mobile Media Companion rz1715 Instrukcja obsługi Grill gazowy 3
18 2JANE Tektronix Upgrade Kit Z340FX Instrukcja obsługi Grill gazowy 1
19 2nd Ave. DVD-V7200 Instrukcja obsługi Grill gazowy 0
20 2nd Ave. Canon imageRUNNER 0023W934 Instrukcja obsługi Grill gazowy 1