Streszczenie treści zawartej na stronie nr. 1
English English English English English English English
HDD Navigation System with 7 "Wide TFT Display and DVD/MS Multi-Source Receiver
MODEL
INSTALLATION MANUAL
Be sure to read this installation manual thoroughly before carrying out installation and making connections. If
installation methods or non-standard parts that are not specified in this installation manual are used, accidents or
injury may result.
Professional installation is recommended, contact the place of purchase to schedule an app
Streszczenie treści zawartej na stronie nr. 2
English English English English English English English Components Check that all of the following components are present Check that all of the following components are present Components Main unit components Main unit Interconnecting cable Interconnecting cable Interconnecting cable 1 2 3 4 x 1 (Power and speaker connector) (Speed pulse, parking, (E-lan etc) (16P) x 1 reverse,video, etc) (16P) x 1 (20P) x 1 Antenna cable Bezel Mounting sleeve Side bracket 5 6 7 8 x 1 x 1 x 1 x 2 Case Splicin
Streszczenie treści zawartej na stronie nr. 3
English English English English English English English For your safety in using the AVN8826 For your safety in using the AVN8826 Warnings and caution signs, illustrated bellow, are posted throughout this manual as well as on the AVN8826. They show safe and correct ways to handle the product so as to prevent personal injury to you and others and avoid damage to property. Before reading through the manual, take time to read through and learn the important information listed in this section. This
Streszczenie treści zawartej na stronie nr. 4
English English English English English English English Names and functions of terminals Names and functions of terminals • • Never cut the insulation on the power cable or use it to power any other equipment. If the rated current capacity of the power cable is exceeded, fire and electric shocks may result. • • The cables should be secured with tape or a similar securing method to prevent any obstructions while driving. If they get wound or entangled around components such as the steering wheel,
Streszczenie treści zawartej na stronie nr. 5
English English English English English English English Wire colours and connection points for connection cables 2 and 3 and 4 1 Antenna power supply (Blue) Connect to the automatic-antenna control terminal of the vehicle. 2 Control power supply (Blue/White) Connect the control terminal for the external amplifier, etc. 3 Vehicle speed pulse signal wire (Purple/White) Connect to the vehicle speed pulse signal terminal. 4 Parking brake signal wire (Red/White) Connect to the parking brake signal te
Streszczenie treści zawartej na stronie nr. 6
English English English English English English English Connecting the vehicle speed pulse, parking Connecting the vehicle speed pulse, parking brake, and reverse cables (wires) brake, and reverse cables (wires) Notes on installation Check the vehicle speed pulse signal, parking brake signal, and reverse signal carefully before making the • • connections. If the cables are incorrectly connected, accidents or problems with correct operation may result. The label on the vehicle speed pulse signal
Streszczenie treści zawartej na stronie nr. 7
English English English English English English English - Connecting point for the reverse signal (example) - Attach a splicing Tip connector at this location Reverse lamp • • Be sure to connect the reverse signal cable. If it is not connected, the vehicle position may be incorrect when the vehicle is reversed. • • Use a circuit tester to confirm that a sensing voltage of 6 V or higher is generated when the vehicle is reversed. Use a splicing connector to connect the reverse signal 1 cable (gre
Streszczenie treści zawartej na stronie nr. 8
English English English English English English English DIGITAL OUT (Do not remove cap) RCA CABLE (supplied with DCU105) Pink TEL MUTE Light Green H/A MUTE System connection example System connection example • • Never cut the insulation on the power cable or use it to power any other equipment. If the rated current capacity of the power cable is exceeded, fire and electric shocks may result. • • The cables should be secured with tape or a similar securing method to prevent any obstructions while
Streszczenie treści zawartej na stronie nr. 9
English English English English English English English Installing the GPS antenna Installing the GPS antenna Notes on installation • • The cables should be bound together with tape or a similar securing method (example: wire ties) so that they do not interfere with driving. If it becomes wound or entangled around parts such as the steering wheel, shifting lever, or brake pedal, accidents may result. • • Do not install the GPS antenna where it will obstruct the driver's vision or where it will b
Streszczenie treści zawartej na stronie nr. 10
English English English English English English English - Installation inside the vehicle (example) - Choose an installation location on the dashboard which 1 is flat and has a clear view of the sky. 16 Earth plate 14 GPS antenna Tip • • Select a location that is at least 20 in. away from the main unit. If this is not done, the GPS measurement precision will drop. • • Be sure to use the earth plate when installing the GPS antenna. If the earth plate is not used, the reception sensitivity will dr
Streszczenie treści zawartej na stronie nr. 11
English English English English English English English Installing the main unit Installing the main unit - Installation angle - Tip Front To maintain proper function, the unit must be mounted less than 30 degrees. If the angle is in excess of 30 degrees, DVD/CD skipping and improper DVD/CD and Memory Stick ejection may occur. 30˚ or less Level (reference) - Installation preparation- Tip Caution In the event that the main unit requires shipping, reattach Caution label the caution label to help
Streszczenie treści zawartej na stronie nr. 12
English English English English English English English Metal of vehicle Insert the main unit into the mounting sleeve until it 4 Dashboard or console box locks in place. Fasten the rear of the main unit. 5 Install the bezel on the main unit. 6 Tip • • Be careful not to forcefully push on the main unit's display or buttons during installation. This may result in damage to the main unit. 7 Mounting sleeve • • This installation method is only one example. When installing the main unit to the vehic
