Instrukcja obsługi Guardian Fall Protection 6200

Streszczenie treści zawartej na stronie nr. 1

Installation Guide
Guardian 6200
Commercial Vehicle Productivity and Security
The Guardian 6200 is a high-performance beacon designed for commercial vehicle applications that require location
based services including productivity and security. It is ideally suited to installations in delivery and service fleets as
well as public safety, mass transportation, utility, and off-road or construction vehicles.
Security features include vehicle theft detection and recovery as well as a means of conne

Streszczenie treści zawartej na stronie nr. 2

Guardian 6200 Installation Guide For best performance, the • Signals will penetrate upholstery, adhesive side of the antenna carpet, plastic dashboards, etc., but not metal panels or brackets should face the sky through the area of least signal blockage • Signals will penetrate window glass but not metallic tinted windows or painted edges of windows • Radio antenna or defrost wires embedded in glass may degrade signals 2 Beacon Installation Position • Determine beacon installation

Streszczenie treści zawartej na stronie nr. 3

Guardian 6200 Installation Guide WIRING CONNECTIONS Colour Function Pin # Specification Yellow/White 12V Power 15 +10.8 ~ +32 VDC (2A max draw) Green/White Ground 16 0V Red/White Ignition Sense 13 High: +10.8 +32 VDC Low: 0V Green Panic Button 6 High: +10.8 +32 VDC (optional) Low: 0V White Aux Input 10 High: +10.8 +32 VDC (optional) Low: 0V All other wires require no connection Option 2 – Fuse Panel Wiring Method As an alternative to soldering connections into vehicle’s wiring, the supplied

Streszczenie treści zawartej na stronie nr. 4

Guardian 6200 Installation Guide 4 Connect and Mount Beacon • Connect the two antenna cables to the beacon • If a suitable panel for affixing the supplied mounting using the corresponding coaxial connectors plate is not available, fastening the beacon to a bracket or wire bundle with plastic cable ties is also • Attach the wiring harness to the beacon and ensure adequate that the retaining clip snaps in place • Coil and secure any loose or extra length wire • Affix the beacon securely to