Instrukcja obsługi ATD Tools ATD7325

Streszczenie treści zawartej na stronie nr. 1

MagicLift™
Service Jack,
Low Profile
Operating Instructions & Parts Manual
Capacity
Model
ATD7325 2 Ton
U.S. Patent No’s. 6,199,379 • 5,946,912

This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
!
Obey all safety messages that follow this symbol to avoid possible injury or death.
! ADVERTENCIA ! WARNING
To avoid crushing and related injuries:
• Leer, comprender, y seguir las instrucciónes antes
de utilizar el aparato.
NEVER work on, under or a

Streszczenie treści zawartej na stronie nr. 2

SAFETY and GENERAL INFORMATION Save these instructions. For your safety, read, understand, and follow the information provided with and on this jack before using. The owner and/or operator of this equipment shall have an understanding of this jack and safe operating procedures before attempting to use. The owner and/or operator shall be aware that the use and repair of this product may require special skills and knowledge. Instructions and safety information shall be conveyed in the operator

Streszczenie treści zawartej na stronie nr. 3

PREPARATION Assembly Insert handle into the handle sleeve. Tighten the bolt on handle sleeve to prevent accidental removal of handle while in use. Before Use 1. Verify that the product and application are compatible, if in doubt call ATD Tools Tech. Service (636) 327-9050. 2. Before using this product, read the operator's manual completely and familiarize yourself thoroughly with the product, its components and recognize the hazards associated with its use. 3. To familiarize yourself with basi

Streszczenie treści zawartej na stronie nr. 4

! WARNING ! WARNING • Study, understand, and follow all printed materials provided with/on this product before use. X • Do not exceed rated capacity. • Use only on hard, level surface. To avoid crushing and related injuries: • This is a lifting device only! • Never work on, under or around a load supported • Immediately after lifting, support the load with only by hydraulic jack. a pair of appropriately rated jack stands. • Always use adequately rated jack stands. • Lift only on ar

Streszczenie treści zawartej na stronie nr. 5

MAINTENANCE Important: Use only good grade hydraulic jack oil. Avoid mixing different types of fluid and Never use brake fluid, turbine oil, transmission fluid, motor oil or glycerin. Improper fluid can cause failure of the jack and the potential for sudden and immediate loss of load. We recommend Mobil DTE 13M or equivalent. Adding oil 1. With saddle fully lowered set jack in its upright, level position. Locate and remove vent screw. 2. Fill with oil until ~3/16” above the inner cylinder as s

Streszczenie treści zawartej na stronie nr. 6

REPLACEMENT PARTS Not all components of the jack are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, give Model number, part number and description below. Call or write for current pricing: ATD Tools Inc. 160 Enterprise Drive, Wentzville, MO 63385. Tel:(636)327-9050 Fax:(636)327-9044 Replacement Parts Illustration for ATD7325 12 13 1 2 3 24 k 10 q j 23 i r l p o h n g m b f e 11 20 21 25 6 d 9 c 8 22 b

Streszczenie treści zawartej na stronie nr. 7

Replacement Parts List for ATD7325 Item# Part# Description Qty. 1 G86301-0001 Saddle Pad 1 2 G86301-0017 Saddle 1 3 G86308-0001 Hydraulic Unit 1 4 G86301-0004 Front Wheel Assembly 2 5 G86301-0003 Rear Caster Assembly 2 6 G86301-0008 Handle Grip 1 7 G86301-0019 Handle Assembly 1 8 G86308-0003 Handle Sleeve 1 9 G48900-0024 Bolt, M10x16 1 10 G86308-0004 U-joint 1 11 G86301-0014 Vent Screw 1 12 G86301-0012 Return Spring, Lift Arm 2 13 G86308-0005 Cover 1 14 G86301-0023 Nut, M16 2 15 G86301-0024 Spri

Streszczenie treści zawartej na stronie nr. 8

ONE YEAR LIMITED WARRANTY For a period of one (1) year from date of purchase, ATD Tools Inc. will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer's exclusive remedy. Performance of any obligation under this warranty may be obtained by returning the warranted product, freight prepaid, to ATD Tools Inc. Warranty Service Department, 160 Enterprise Drive, Wentzvil