Instrukcja obsługi Harbor Freight Tools 2-Ton Compact Floor Jack 68783

Streszczenie treści zawartej na stronie nr. 1

2-Ton Compact Floor Jack
Specifications
68783 Floor Jack
Weight Capacity 2 Tons (4,000 lb.)
Maximum Height 13 IN.
Minimum Height 5 IN.






When unpacking, make sure that the product is intact and undamaged. If any parts are missing
or broken, please call Harbor Freight Tools at 1-800-444-3353 as soon as possible.
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration

Streszczenie treści zawartej na stronie nr. 2

Save This Manual Safety Warnings Keep this manual for the safety warnings and precautions, WARNING Read all safety warnings assembly, operating, inspection, maintenance and cleaning and instructions. Failure to heed procedures. Write the product’s serial number on the these markings may result in personal front page of the user’s manual (or month and year of injury and/or property damage. purchase if product has no number). Keep this manual and 1. Study, understand, and follow all instru

Streszczenie treści zawartej na stronie nr. 3

Adding Oil Jack Components 1. Remove the Oil Fill Screw (Fig. 2). 2. Add qualified hydraulic oil of high grade into Saddle the Fill Screw (Fig. 2) opening slowly until the oil reaches the top of the oil fill hole. Lifting Arm Note: Do not touch Handle when adding the hydraulic oil. Oil Fill Screw Handle (Not Shown) 3. Replace the Fill Screw (Fig. 2). Socket Lifting 1. Park vehicle on a flat, level, solid, surface safely away from oncoming traffic. Turn off the vehicle’s engine. Place

Streszczenie treści zawartej na stronie nr. 4

7. Center the vehicle’s lifting point(s) on the saddle of the jack stand(s). Set the jack stand(s) according Inspection, Maintenance, & Cleaning to the manufacturer’s instructions, making sure that they lock securely into position. Procedures not specifically explained Note: Always set both Jack Stands at the same height. in this manual must be performed only by a qualified technician. 8. Slowly turn the Handle counterclockwise to lower the vehicle onto the saddle(s) of the jack stand(s).

Streszczenie treści zawartej na stronie nr. 5

Troubleshooting To Prevent Serious Injury: Use caution when troubleshooting a malfunctioning jack. Stay well clear of the supported load. Completely resolve all problems before use. If the solutions presented in the Troubleshooting guide do not solve the problem, have a qualified technician inspect and repair the jack before use. After the jack is repaired: Test it carefully without a load by raising and lowering it fully, checking for proper operation, BEFORE RETURNING THE JACK TO OPERAT

Streszczenie treści zawartej na stronie nr. 6

PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS AND/OR DISTRIBUTOR EXPRESSLY STATES PROVIDED THE PARTS DIAGRAM IN THIS MANUAL THAT ALL REPAIRS AND PARTS REPLACEMENTS AS A REFERENCE TOOL ONLY. NEITHER THE SHOULD BE UNDERTAKEN BY CERTIFIED AND MANUFACTURER NOR DISTRIBUTOR MAKES ANY LICENSED TECHNICIANS AND NOT BY THE BUYER. REPRESENTATION OR WARRANTY OF ANY KIND THE BUYER ASSUMES ALL RISK AND LIABILITY TO THE BUYER THAT HE OR SHE IS QUALIFIED TO ARISING OUT OF HIS

Streszczenie treści zawartej na stronie nr. 7

Assembly Diagram SKU 68783 For technical questions, please call 1-800-444-3353 Page: 6

Streszczenie treści zawartej na stronie nr. 8

To take advantage of this warranty, the product or part must Limited 90 Day Warranty be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the Harbor Freight Tools Co. makes every effort to assure that defect, we will either repair or replace the product at our its products meet high quality and durability standards, and election or we may elect to refund the purchase pri