Instrukcja obsługi Optimus 120-1746

Streszczenie treści zawartej na stronie nr. 1

Optimus 4-Inch Flush-Mount Speaker System
(120-1746) Preparation Faxback Doc. # 34216

CHOOSING A LOCATION

For the best performance, install these speakers on a solid, firm surface
that does not vibrate at high volume levels. We recommend you mount the
speakers in the door panels or the rear deck.

NOTE: Cardboard or fiber panels are not good mounting surfaces.

As you are deciding on a location, carefully inspect the area behind the
proposed mount

Streszczenie treści zawartej na stronie nr. 2

Optimus 4-Inch Flush-Mount Speaker System (120-1746) Installation Faxback Doc. # 34217 INSTALLING THE SPEAKERS 1. Use the supplied template to mark the speaker opening and the mounting screw hole locations. 2. Cut out the marked speaker opening in the mounting surface. NOTE: Steel door panels and the rear deck (behind the upholstery) might already have large cut-out areas for recessing the speaker 3. Drill the four mounting

Streszczenie treści zawartej na stronie nr. 3

7. Remove the grille from each speaker's mounting bracket to expose the mounting holes. 8. Place the mounting bracket on the speaker. 9. Align each speaker's mounting holes and the mounting bracket's holes with the holes on the speed clips, thread a supplied screw through each mounting hole, and tighten all screws until they are secure. 10. Firmly press the grille onto each speaker's mounting bracket. NOTE: You can use the supplied adhesive glue to further secu

Streszczenie treści zawartej na stronie nr. 4

Optimus 4-Inch Flush-Mount Speaker System (120-1746) Specification Faxback Doc. # 34218 Speaker Size: Woofer: ........................................ 4 Inch (102 mm) Dual Cone Woofer, Cone: ...................................................... Paper Sub Cone: .......................................................... Paper Grille: ...................................................... Hi Heat ABS S.P.L.: ........................................