Streszczenie treści zawartej na stronie nr. 1
Cordless Impact
Driver
Equipped with Electric Brake
MODEL 6903VD
INSTR UCTIO N M A N U A L
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
www.makitatools.com
Streszczenie treści zawartej na stronie nr. 2
SPECIFICATIONS Model 6903VD Capacities Machine screw and bolt 4 mm - 10 mm (5/32” - 3/8”) No load speed (RPM) 0 - 2,200/min. Impacts per minute 0 - 2,800 Max. fastening torque 68.6 N.m (50 ft.lbs) Dimensions (L x W x H) 188 mm x 58 mm x 225 mm (7-3/8” x 2-1/4” x 8-7/8”) Net weight 1.3 kg (2.9 lbs) Battery Cartridge 9100 Battery Charger DC9710 Voltage Input Output Charging time 9.6 V A. C. only 50 Hz - 60 Hz D.C.7.2V, 9.6 V 1 Hr. Manufacturer reserves the right to change specifications without
Streszczenie treści zawartej na stronie nr. 3
Electrical Safety Tool Use and Care 4. A battery operated tool with integral bat- 12. Use clamps or other practical way to teries or a separate battery pack must be secure and support the workpiece to a recharged only with the specified charger stable platform. Holding the work by hand or for the battery. A charger that may be suit- against your body is unstable and may lead able for one type of battery may create a risk to loss of control. of fire when used with another battery. 13. Do not forc
Streszczenie treści zawartej na stronie nr. 4
one tool may create a risk of injury when 22. When servicing a tool, use only identical used on another tool. replacement parts. Follow instructions in the Maintenance section of this manual. SERVICE Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of 21. Tool service must be performed only by shock or injury. qualified repair personnel. Service or main- tenance performed by unqualified personnel may result in a risk of injury. SPECIFIC SAFETY RULES USB02
Streszczenie treści zawartej na stronie nr. 5
IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER & BATTERY CARTRIDGE USC001-3 1. SAVE THESE INSTRUCTIONS - This man- 6. To reduceriskofdamageto electricplug ual contains important safety and operat- and cord, pull by plug rather than cord ing instructions for battery charger. when disconnecting charger. 2. Before using battery charger, read all 7. Make sure cord is located so that it will instructions and cautionary markings on not be stepped on, tripped over, or other- (1) battery charger, (2) battery
Streszczenie treści zawartej na stronie nr. 6
ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when (3) Do not expose battery cartridge to temperature is BELOW 10°C (50°F) or waterorrain. ABOVE 40°C (104°F). A battery short can cause a large current 2. Do not attempt to use a step-up trans- flow, overheating, possible burns and former, an engine generator or DC power even a breakdown. receptacle. 6. Do not store the tool and Battery Car- 3. Do not allow anything to cover or clog the tridge in locati
Streszczenie treści zawartej na stronie nr. 7
FUNCTIONAL CAUTION: DESCRIPTION Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. 002300 Installing or removing battery cartridge 1 Alwaysswitchoff thetoolbeforeinsertionorremovalof the battery cartridge. To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the tool. 2 To insert the battery cartridge, align the tongue on the 1.
Streszczenie treści zawartej na stronie nr. 8
NOTE: The battery charger is for charging Makita battery cartridge. Never use it for other purposes or for other manufacturer’s batteries. When you charge a new battery cartridge or a battery cartridge which has not been used for a long period of time, it may not accept a full charge. This is a normal condition and does not indicate a problem. You can recharge the battery cartridge fully after discharging it completely and recharging a couple of times. When you charge a battery cartridge f
Streszczenie treści zawartej na stronie nr. 9
002813 Switch action CAUTION: Before inserting the battery cartridge into the tool, always check to see that the switch trigger actuates 1 properly and returns to the “OFF” position when released. To start the tool, simply pull the switch trigger. Tool speed is 1. Switch trigger increased by increasing pressure on the switch trigger. Release the switch trigger to stop. Electric brake This tool is equipped with an electric brake. If the tool consis- tently fails to quickly stop after switch tri
Streszczenie treści zawartej na stronie nr. 10
001267 To install the bit, pull the sleeve in the direction of the arrow and insert the bit into the sleeve as far as it will go. Then release the sleeve to secure the bit. To remove the bit, pull the sleeve in the direction of the arrow and pull the bit out firmly. 1 2 NOTE: If the bit is not inserted deep enough into the sleeve, the 1. Bit sleeve will not return to its original position and the bit 2. Sleeve will not be secured. In this case, try re-inserting the bit according to the instruc
Streszczenie treści zawartej na stronie nr. 11
1. When the battery cartridge is discharged almost com- pletely, voltage will drop and the fastening torque will be reduced. 2. Driver bit or socket bit Failure to use the correct size driver bit or socket bit will cause a reduction in the fastening torque. 3. Bolt Even though the torque coefficient and the class of bolt are the same, the proper fastening torque will differ according to the diameter of bolt. Even though the diameters of bolts are the same, the proper fastening torque will di
Streszczenie treści zawartej na stronie nr. 12
Call your nearest Makita Service Center or Distributor to determine the location that provides Makita battery recycling. See your local Yellow Pages under “Tools-Electric”. ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regardi
Streszczenie treści zawartej na stronie nr. 13
First-Class Postage Required Post Office will not deliver without proper postage. Makita U.S.A., Inc. 14930 Northam Street La Mirada, CA 90638-5753 Fold 13 Cut
Streszczenie treści zawartej na stronie nr. 14
MAIL THIS PORTION Your answers to the following questions are appreciated. 1.This product was purchased from: 3. How did you learn about this product: Home Center Other ( ) Magazine Radio Hardware/Lumber Store From Dealer Exhibition Tool Distributor Newspaper From Friend Industrial Supply Store Display Previous Usage Construction Supply Catalog Other ( ) 2. Use of the product is intended for: 4. Most favored points are: Construction Trade Design Repair Service Industrial Maintenance Features Dur
Streszczenie treści zawartej na stronie nr. 15
FACTORY SERVICE CENTERS 1-800-4-MAKITA RETAIN THIS PORTION FOR YOUR RECORDS ALABAMA COLORADO KENTUCKY NEW MEXICO PUERTO RICO 2365 Pelham Parkway 11839 E. 51st Ave. 1215 S. Hurstbourne Parkway 5805 Menaul Blvd. NE 200 Guayama St. Pelham, AL 35124 Denver, CO 80239-2709 Louisville, KY 40222 Albuquerque, NM 87110 Hato Rey, PR 00917 (205) 620-1791 (303) 371-2850 (502) 326-3740 (505) 881-4619 (787) 250-8776 ARIZONA CONNECTICUT LOUSIANA NEW YORK TENNESSEE 3707 E. Broadway Rd., Ste. 6 508 Spring St. 562
Streszczenie treści zawartej na stronie nr. 16
WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of w
