Instrukcja obsługi Walker Edison 42" Bedroom TV Console WQ42BC1BL

Streszczenie treści zawartej na stronie nr. 1

Item #: WQ42BC1
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
Revised 09/2010

Streszczenie treści zawartej na stronie nr. 2

General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The four main types of hardware used to assemble this product are: wood dowels, cam bolts and locks, bolts and screws. V. The provided glue is to secure wood dowels in place. When first inserting dowels, locate the appropriate hol

Streszczenie treści zawartej na stronie nr. 3

Parts List

Streszczenie treści zawartej na stronie nr. 4

Hardware List Wood dowel Cam bolt Cam lock Door stopper Round-headed screw Large bolt Door stopper plate Small screw Door hinge Medium screw Handle Small bolt Shelf support pin Plastic wedge Large screw Wrench Glue tube Sticker

Streszczenie treści zawartej na stronie nr. 5

Insert dowels (A) into slats (13,14,15). Screw cam bolts (B) into top panel (1) and slat (13). Attach door stopper (D) to top panel (1) using round-headed screws (E). Attach slats (14,15) to slat (13) using cam bolts as guides. Insert cam locks (C) into slats (14,15) and tighten with a screwdriver.

Streszczenie treści zawartej na stronie nr. 6

Screw cam bolts (B), and insert dowels (A) into panel (4). Attach panel (10) to panel (4) using cam bolts and dowels as guides. Insert cam locks (C) into panel (10) and tighten with a screwdriver. Screw cam bolts (B), and insert dowels (A) into panel (3). Attach panel (7) to panel (3) using cam bolts and dowels as guides. Insert cam locks (C) into panel (7) and tighten with a screwdriver.

Streszczenie treści zawartej na stronie nr. 7

Attach bottom panel (2) to the panel assemblies from Steps 3 and 4, and to panels (6,9) using large bolts (F) and wrench (Q). Note that panels (6,9) will not be directly attached to the panel assemblies from Steps 3 and 4. Attach the base assembly from Step 2 to bottom panel (2) by inserting the dowels of the base assembly into the pre-drilled holes of bottom panel (2).

Streszczenie treści zawartej na stronie nr. 8

Slide back panel (18), back slat (17) then back panel (16) into the stand assembly. Insert dowels (A) into the stand assembly.

Streszczenie treści zawartej na stronie nr. 9

Insert cam locks (C) into the stand assembly. Attach top panel (1) to the stand assembly using cam bolts and dowels as guides. Tighten cam locks (C) with a screwdriver to secure top panel (1). Attach door hinges (I) to doors (11,12) using medium screws (J). Attach handles (K) to doors (11,12) using small bolts (L). Attach door stopper plates (G) to doors (11,12) using small screws (H).

Streszczenie treści zawartej na stronie nr. 10

Attach doors (11,12) to the stand assembly at hinges (I) using medium screws (J). For proper alignment of doors, it may be necessary to loosen small screws (J), adjust the placement of hinges (I) and re-tighten screws (J). Insert shelf support pins (M) into the stand at desired shelf heights. Carefully place shelves (5) onto shelf support pins (M). Note that there will be two shelf support pins (M) on either end of each shelf (5).

Streszczenie treści zawartej na stronie nr. 11

Insert shelf support pins (M) into the stand at desired shelf heights. Carefully place shelves (8) onto shelf support pins (M). Note that there will be two shelf support pins (M) on either end of each shelf (8). Insert shelf support pins (M) into the stand at desired shelf heights. Carefully place shelves (8) onto shelf support pins (M). Note that there will be two shelf support pins (M) on either end of each shelf (8).

Streszczenie treści zawartej na stronie nr. 12

Secure back panels (16,18) using plastic wedges (N) and large screws (P).