Instrukcja obsługi Cisco Systems VIDEO CAMERA OL-20862-01

Streszczenie treści zawartej na stronie nr. 1

CHAPTER
5
Setting Up the Cisco Unified Video Camera
The Cisco Unified IP Phone 9951 and 9971 supports the add-on accessory Cisco Unified Video Camera.
The Cisco Unified Video Camera connects to your Cisco Unified IP Phone and allows you to make a
point-to-point video call with another Cisco Unified IP Phone with a Cisco Unified Video Camera
attached. If a phone does not have a Cisco Unified Video Camera attached, it can only receive one-way
video.
This chapter contains the following informati

Streszczenie treści zawartej na stronie nr. 2

Chapter 5 Setting Up the Cisco Unified Video Camera Attaching the Cisco Unified Video Camera Step 2 On the same window, enable the Video Capabilities parameter. Step 3 Click Save. Attaching the Cisco Unified Video Camera To install the Cisco Unified Video Camera, you can either: � Attach the camera to your phone. � Attach the camera to your computer monitor (or to another object in your work area). The USB port connector on the bottom of the Cisco Unified Video Camera attaches to the back

Streszczenie treści zawartej na stronie nr. 3

Chapter 5 Setting Up the Cisco Unified Video Camera Adjusting the Camera Settings Step 3 Highlight Cisco Unified Camera. Step 4 Press the Set-up softkey. Step 5 Select View Area. Step 6 Use the arrows on the Navigation pad to increase or decrease the view area. Step 7 Press the Save softkey. Adjusting the Brightness Setting The Brightness setting affects the video that you transmit to others. However, it does not affect the video that you receive from other parties. You can adjust the br

Streszczenie treści zawartej na stronie nr. 4

Chapter 5 Setting Up the Cisco Unified Video Camera Post-Installation Steps Step 2 Select Accessories. Step 3 Highlight Cisco Unified Camera. Step 4 Press the Set-up softkey. Step 5 Press the Turn On or Turn Off softkey. Post-Installation Steps After installing the Cisco Unified Video Camera, perform the following checks: 1. Wait till the “camera ready” message appears. Note The camera may need to upgrade after installation. This may take a few minutes before the camera is operational. 2