Instrukcja obsługi Milwaukee Instruments MW801

Streszczenie treści zawartej na stronie nr. 1

PRELIMINARY EXAMINATION
CALIBRATION PROCEDURE:
Milwaukee
Remove the instrument from the packing material
Remove the protective cap from the electrode.
and examine it carefully to make sure that no
Switch the meter on.
damage has occurred during shipment. If noticeable
Select the range pressing the appropriate key for
USER MANUAL
damage is found, notify your Dealer.
pH, EC or TDS.
Each meter is supplied complete with:
• MA850DIN preamplified non refillable double
pH Calibration
PORTABLE pH/EC/

Streszczenie treści zawartej na stronie nr. 2

EC/TDS calibration: pH VERSUS TEMPERATURE CHART SPECIFICATIONS: A) PREPARATION MW801 MW802 TS EMP pH VALUE Single point EC calibration. Choose appropriate standard: RANGE 0.0 to 14.0 pH 0.00 to 14.00 pH °F C°4M7 A900M0 A900 MA901 0 to 1990 ppm 0 to 4000 ppm Model MW801: use 1382 ppm 0 to 1990 μS/cm 0.00 to 6.00 mS/cm 023143 .0 72 .1 10.3 (M10032B) for TDS or 1.413 μS/cm (M10031B) for EC calibration. 514040 .0 74 .1 10.2 RESOLUTION 0.1 pH 0.10 pH Model MW802: use 1500 ppm (M10442B) for 10 05047