Instrukcja obsługi Revolabs Inc.1

Streszczenie treści zawartej na stronie nr. 1

Revolabs Single Channel System — Sony PCS-1 Setup Guide
This setup guide will guide you through the steps needed to properly connect a
Revolabs Single Channel System to a Sony PCS-1 video codec.

Note: It is important to carefully follow these instructions in order and completely.
Otherwise your Single Channel System and/or the video codec may not function
properly. Please read through these instructions completely before proceeding.
Contact Revolabs technical support if you have

Streszczenie treści zawartej na stronie nr. 2

Connecting the Cables 1. Connect a Revolabs 07-STEMIC-PPP Line-to-Mic cable to the 2.5mm analog output on the Single Channel System. 2. Connect a female XLR-to-1/8” cable between the male XLR connector on the 07 -STEMIC-PPP cable and the “MIC 1” port on the PCS-1. Disregard the RCA portion of the 07-STEMIC-PPP cable. 1 2 Configuring the Sony PCS-1 Video Codec 1. Push the TOOLS button on the remote control 2. Select SETUP 3. Select AUDIO to MIC 4. Select CTE to OFF 5. Select ECHO C