Streszczenie treści zawartej na stronie nr. 1
HSDPA Standard AT Commands Manual
VERSION 1.2
This document is the sole and 36A Gibson Ave
exclusive property of Maxon. Not to
Padstow NSW 2211
be distributed or divulged without
Australia
prior written agreement.
URL: www.maxon.com.au
Streszczenie treści zawartej na stronie nr. 2
Document Description All data and information contained in or disclosed by this document are confidential and proprietary information of Maxon Australia, and all rights therein are expressly reserved. By accepting this material, the recipient agrees that this material and the information contained therein are held in confidence and in trust and will not be copied or reproduced in whole or in part, nor its contents revealed in any manner to others without the express written permission o
Streszczenie treści zawartej na stronie nr. 3
REVISION HISTORY Product Name Maxon ModMax - MM-6280IND Document Type Public Document Number CHE-FDS-2301 Current Version Number 1.2 Status of the Document Public Release Revision Date 2007-12-13 Total Number of Pages 60 - Revision History Level Date History 1.0 2006-10-02 Internal Release Version 1.1 2007-12-13 Initial Version 1.2 2007-12-12 +CLCK format adjustment HSDPA Standard At Commands Page 3 of 60 Version 1.2
Streszczenie treści zawartej na stronie nr. 4
CONTACT INFORMATION Depending on the nature of your inquiry, please feel free to contact the following senior personnel: Sales, Marketing & Corporate: Ray Sanders – Managing Director Email: rayws@maxon.com.au Phone: +61 2 9707 3000 Dana Baggetto – General Manager Email: danab@maxon.com.au Phone: +61 2 9707 3000 Technical: Phone: +61 2 9707 3000 Email: support@maxon.com.au HSDPA Standard At Commands Page 4 of 60 Version 1.2
Streszczenie treści zawartej na stronie nr. 5
TABLE OF CONTENTS HSDPA Standard AT Commands Manual.................................................................................... 1 Document Description .............................................................................................................. 2 REVISION HISTORY .................................................................................................................. 3 CONTACT INFORMATION..................................................................
Streszczenie treści zawartej na stronie nr. 6
1.24. Read operator names +COPN ...........................................................................................30 1.25. Informative examples.......................................................................................................30 1.25.1. Operator information reading....................................................................................30 1.25.2. IMSI number reading ....................................................................................
Streszczenie treści zawartej na stronie nr. 7
Introduction 1.1. General The 3GPP TS 27.007 technical specification defines an AT command set for use in controlling devices that operate on WCDMA networks. This document identifies which of those AT commands are supported on the CHU628 USB modem module. The specification document that lists the AT command set, 3GPP TS 27.007 V5.6.0(2005-03), is available on the 3GPP web site, www.3gpp.org. The table below identifies whether each command is supported on the CHU628 USB module. An “
Streszczenie treści zawartej na stronie nr. 8
Term Description MSC Mobile Switching Centre Mobile-Terminated where the SMS or the call is terminated [received] at the MT Mobile Station. Mobile Termination 2An MT2 provides a non-ISDN (Rm) user interface, e.g., MT2 CCITT V series or CCITT X series. Same at DCE. Refers to the MM-6280IND modem. Non Volatile Memory. User changeable and is written at time of change or NVM entry to a separate section of memory unaffected by power cycles. The setting value is available in all profiles
Streszczenie treści zawartej na stronie nr. 9
3GPP TS 22.081 3rd Generation Partnership Project; Line identification supplementary services - Stage 1. 3GPP TS 22.082 3rd Generation Partnership Project; Call Forwarding (CF) supplementary services - Stage 1". 3GPP TS 22.083 3rd Generation Partnership Project; Call Waiting (CW) and Call Hold (HOLD) supplementary services - Stage 1". 3GPP TS 22.088 3rd Generation Partnership Project; Call Barring (CB) supplementary services - Stage 1. 3GPP TS 23.003 3rd Generation Partnership Proj
Streszczenie treści zawartej na stronie nr. 10
Portable Computer and Communications Association PCCA STD-101 Data Transmission Systems and Equipment Serial Asynchronous Automatic Dialling and Control for Character Mode DCE on Wireless Data Services. 3GPP TS 27.060 3rd Generation Partnership Project; General requirements on Mobile Stations (MS) supporting General Packet Radio Bearer Service (GPRS). CCITT Recommendation V.110 Support of data terminal equipments (DTEs) with V-Series interfaces by an integrated services digital netw
Streszczenie treści zawartej na stronie nr. 11
AT INTERFACE DESCRIPTION 1.4. Basic Integration The MM-6280IND supports asynchronous serial communication known as RS-232 or USB. This chapter describes the basic integration and communication of MT2 with TE2. MT2 hereby defines MM-6280IND and TE2 means host products which can issue AT commands and handle the response through UART or USB signalling. The popular examples of TE2 are PC’s, PDA’s and unmanned systems such as Data Loggers, RTU’s or PLC’s. 1.5. Serial Interface TE2’s comma
Streszczenie treści zawartej na stronie nr. 12
The following diagram shows the naming convention of messages between MT2 and TE2. Command (including AT) Notification (excluding AT) TE2 MT2 TE2 MT2 Response (excluding AT) Signal (H/W) TE2 MT2 Indication (message) Figure 1. Naming convention diagram 1.8. DTE-TA/DCE interface commands Table 3. ITU-T V.250 commands relating to TE-TA interface Command Req Description Support E
Streszczenie treści zawartej na stronie nr. 13
4800, 9600, 19200), (45, 50, 75, 110, 150, 300, 600, 38400, 57600, 115200, 230400) +IPR= Set value TE2-MT2 Character Framing. This extended-format supported compound parameter is used to determine the local serial port start-stop (asynchronous) character framing that the MT2 shall use while accepting TE2 command set and while transmitting information text and result codes to the TE2, if this is not automatically determined (see +IPR). valid numeric values 0 auto
Streszczenie treści zawartej na stronie nr. 14
3 Xon/Xoff global DC1/DC3 on circuit 103 with DC1/DC3 characters being passed through to the remote DCE in addition to being acted upon for local flow control Description 0 None 1 Xon/Xoff local DC1/DC3 on circuit 104 2 Circuit 106 (Clear to Send/Ready for Sending) (Default) : specifies the method to be used by the DTE to control the flow of received data from the DCE; : specifies the method to be used by the DCE to control the flow of transmitted data
Streszczenie treści zawartej na stronie nr. 15
Mobile Termination errors commands Table 4. Mobile Termination control and status commands Command Req Description Support +CMEE Report Mobile Termination error supported 1.9. Report Mobile Termination error( +CMEE) Set command disables or enables the use of result code +CME ERROR: as an indication of an error relating to the functionality of the MT. When enabled, MT related errors cause +CME ERROR: final result code instead of the regular ERROR final result code. ERR
Streszczenie treści zawartej na stronie nr. 16
7 PH-FSIM PUK required 10 SIM not inserted (Note) 11 SIM PIN required 12 SIM PUK required 13 SIM failure (Note) 14 SIM busy (Note) 15 SIM wrong (Note) 16 incorrect password 17 SIM PIN2 required 18 SIM PUK2 required 20 memory full 21 invalid index 22 not found 23 memory failure 24 text string too long 25 invalid characters in text string 26 dial string too long 27 invalid characters in dial string 30 no network service 31 network timeout 32 network not allowed - emergency
Streszczenie treści zawartej na stronie nr. 17
100 Unknown 1.10. Informative examples An example of TA responses with all three +CMEE values when MT manufacturer identification is requested but MT is not connected to the TA: AT+CMEE=0 (+CME ERROR shall not be used) OK AT+CGMI ERROR AT+CMEE=1 (use numeric ) OK AT+CGMI +CME ERROR: 1 AT+CMEE=2 (use verbose ) OK AT+CGMI +CME ERROR: no connection to phone HSDPA Standard At Commands Page 17 of 60 Version 1.2
Streszczenie treści zawartej na stronie nr. 18
General commands ITU-T Recommendation V.250 [14] includes "Generic DCE Control" commands with the prefix +G. These commands are for the identification of the TA. Four of those commands are adapted here to be the identification commands of the MT. Syntax is otherwise similar but the prefix is +CG. TIA IS-99 [15] uses same commands for base station identification. Table 6. General AT command Command Req Description Support +CGMI Opt. Request manufacturer identification supported +CGMM
Streszczenie treści zawartej na stronie nr. 19
Table 8. +CGMM action command syntax Command Possible response(s) +CGMM +CME ERROR: +CGMM=? value : the total number of characters, including line terminators, in the information text shall not exceed 2048 characters. 1.13. Request product serial number identification (+CGSN) Execution command causes the TA to return one or more lines of information text , determined by the MT manufacturer, which is intended to permit the user of the TA to identify the indi
Streszczenie treści zawartej na stronie nr. 20
1.15. ITU-T V.250 generic TA control commands Table 11. ITU-T V.250 generic TA control commands Command Req Description Support Z[] Mand. TA sets all parameters to their defaults as specified by a supported user memory profile or by the manufacturer, and resets TA &F[] Mand. TA sets all parameters to their defaults as specified by the supported manufacturer I[] Opt. request manufacturer specific information about the supported TA (software cannot use this co
