Streszczenie treści zawartej na stronie nr. 1
P/I-P6NP5 Motherboard
USER'S MANUAL
Streszczenie treści zawartej na stronie nr. 2
USER'S NOTICE No part of this product, including the product and software may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any lan- guage in any form by any means without the express written permission of ASUSTeK COMPUTER INC. (hereinafter referred to as ASUS) except documentation kept by the purchaser for backup purposes. ASUS provides this manual "as is" without warranty of any kind, either express or implied, including but not limited to the implie
Streszczenie treści zawartej na stronie nr. 3
P/I-P6NP5 User's Manual III
Streszczenie treści zawartej na stronie nr. 4
CONTENTS I. INTRODUCTION........................................................1 How this manual is organized .......................................................... 1 Item Checklist .................................................................................. 1 II. FEATURES .................................................................2 Features of This Motherboard .......................................................... 2 Parts of the Motherboard ...............................
Streszczenie treści zawartej na stronie nr. 5
CONTENTS Load Setup Defaults ................................................................. 41 Supervisor Password and User Password ................................ 42 IDE HDD Auto Detection ........................................................ 43 Save and Exit Setup ................................................................. 44 Exit Without Saving ................................................................. 44 Flash Memory Writer Utility .......................................
Streszczenie treści zawartej na stronie nr. 6
FCC & DOC COMPLIANCE Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provid
Streszczenie treści zawartej na stronie nr. 7
I. INTRODUCTION How this manual is organized This manual is divided into the following sections: I. Introduction: Manual information and checklist II. Features: Information and specifications III. Installation: Instructions on setting up the motherboard IV. BIOS Setup: BIOS software setup information V. DMI Utility: BIOS supported Desktop Management Interface VI. PCI-SC200: Installation of an optional SCSI card VII. I-A16C: Installation of an optional Audio card VIII. DOS/Win3.1x: Audio Softwar
Streszczenie treści zawartej na stronie nr. 8
II. FEATURES (Features) II. FEATURES Features of This Motherboard The P/I-P6NP5 is carefully designed for the demanding PC user who wants a great many features in a small package. This motherboard: • Easy Installation: Is equipped with BIOS that supports auto detection of hard drives and Plug and Play to make setup of hard drives and expansion cards virtually automatic. • Multi-Speed Support: Supports one 150-200MHz Pentium Pro CPU on a ZIF Socket 8. • Intel Chipset: Features Intel's 440FX
Streszczenie treści zawartej na stronie nr. 9
II. FEATURES • PCI Bus Master IDE Controller: Comes with an onboard PCI Bus Master IDE controller with two connectors that supports four IDE devices in two channels, provides faster data transfer rates, and supports Enhanced IDE devices such as Tape Backup and CD-ROM drives. This controller supports PIO Modes 3 and 4 and Bus Master IDE DMA Mode 2. BIOS supports IDE CD-ROM boot-up. • Optional IrDA and PS/2 Mouse Connector: This motherboard supports an optional infrared port module for wirele
Streszczenie treści zawartej na stronie nr. 10
SIMM Slot 4 (Bank 1) SIMM Slot 3 (Bank 1) SIMM Slot 2 (Bank 0) SIMM Slot 1 (Bank 0) Board Power Input Primary IDE P9 P8 Secondary IDE Floppy Drives PCI Slot 1 PCI Slot 2 PCI Slot 3 JP10 Multi I/O JP13 ROM Program PCI Slot 4 PCI Slot 5 / MediaBus 2.0 ISA Slot 1 ISA Slot 2 Case Connections ISA Slot 3 III. INSTALLATION (Map of Board) III. INSTALLATION Map of the Motherboard PS/2 Keyboard Mouse COM 2 COM 1 Parallel Printer JP2 BUS Freq. JP3 ZIF Socket 8 JP12 CMOS RAM JP5 JP7 CPU:BUS Ratio JP6 Fan P
Streszczenie treści zawartej na stronie nr. 11
III. INSTALLATION Jumpers 1) JP10 p. 7 Multi-I/O Selection (Enable/Disable) 2) JP13 p. 7 Flash ROM Boot Block Program (Enable/Disable) 3) JP12 p. 8 CMOS RAM (Operation/Clear CMOS Data) 4) JP15, 16, 17, 18 p. 8 Voltage Regulator Output Selection 5) JP2, 3 p. 10 CPU External Clock (BUS) Frequency Selection 6) JP4, 5, 6, 7 p. 10 CPU:BUS Frequency Ratio Expansion Slots 1) SIMM Slots p. 12 DRAM Memory Expansion slots 2) ZIF Socket 8 p. 15 Socket for Central Processing Unit (CPU) 3) ISA Slots 1, 2, 3
Streszczenie treści zawartej na stronie nr. 12
III. INSTALLATION (Jumpers) III. INSTALLATION Installation Steps Before using your computer, you must follow the six steps as follows: 1. Set Jumpers on the Motherboard 2. Install DRAM Modules 3. Install the Central Processing Unit (CPU) 4. Install Expansion Cards 5. Connect Ribbon Cables, Cabinet Wires, and Power Supply 6. Setup the BIOS Software 1. Jumpers Several hardware settings are made through the use of jumper caps to con- nect jumper pins (JP) on the motherboard. See "Map of the Mothe
Streszczenie treści zawartej na stronie nr. 13
Streszczenie treści zawartej na stronie nr. 14
III. INSTALLATION (Jumpers) III. INSTALLATION 3. CMOS RAM (JP12) This clears the user-entered information stored in the CMOS RAM of the Real Time Clock such as hard disk information and passwords. To clear the CMOS data: (1) Turn off the PC, (2) Set jumper to "Clear", (3) Power on the PC, (4) Turn off the PC, (5) Set jumper to "Operation", (6) Power on the PC, (7) Hold down during bootup and enter BIOS setup to re-enter user preferences. Selections JP12 Normal [open] (Default) Clea
Streszczenie treści zawartej na stronie nr. 15
III. INSTALLATION (This page was intentionally left blank) P/I-P6NP5 User's Manual 9 III. INSTALLATION (Jumpers)
Streszczenie treści zawartej na stronie nr. 16
III. INSTALLATION (Jumpers) III. INSTALLATION 5. CPU External (BUS) Frequency Selection (JP2, JP3) These jumpers tells the clock generator what frequency to send to the CPU. These allow the selection of the CPU’s External frequency (or BUS Clock). The BUS Clock times the BUS Ratio equals the CPU's Internal frequency (the advertised CPU speed). 6. CPU to BUS Frequency Ratio (JP4, 5, 6, 7) These jumpers set the frequency ratio between the Internal frequency of the CPU and the External frequen
Streszczenie treści zawartej na stronie nr. 17
III. INSTALLATION (This page was intentionally left blank) P/I-P6NP5 User's Manual 11 III. INSTALLATION (Jumpers)
Streszczenie treści zawartej na stronie nr. 18
III. INSTALLATION (Memory) 2. System Memory (DRAM/SDRAM & SRAM) This motherboard supports four 72-pin SIMMs (Single Inline Memory Modules) of 4MB, 8MB, 16MB, 32MB, 64MB to form a memory size between 8MB to 256MB. The DRAM can be either 60ns or 70ns Fast Page Mode (Asymmetric or Symmetric), Extended Data Output (EDO), or Burst Extended Data Output (BEDO). SIMMs must be installed in pairs so that each bank contains two of the same size memory modules. To support ECC, you must use true (oppos
Streszczenie treści zawartej na stronie nr. 19
DRAM Memory Installation Procedures: 1. The SIMM memory modules will only fit in one orientation as shown because of a "Plastic Safety Tab" on one end of the SIMM sockets which requires the "Notched End" of the SIMM memory modules. 1234 Notched End Bank 0 Bank 1 72 Pin SIMM DRAM Sockets & Module 2. Press the memory module firmly into place starting from a 45 degree angle making sure that all the contacts are aligned with the socket. 3. With your finger tips, rock the memory module into a vertica
Streszczenie treści zawartej na stronie nr. 20
III. INSTALLATION (This page was intentionally left blank) P/I-P6NP5 User's Manual 14
