Streszczenie treści zawartej na stronie nr. 1
Register your product and get support at
www.philips.com/welcome
BDP3100
EN User manual
Streszczenie treści zawartej na stronie nr. 2
Important notes for users in U.K. Laser Specification: • Laser Type: Mains plug • BD Laser Diode: AlGaInN This apparatus is fitted with an approved moulded • DVD Laser Diode: AlGaInP plug. Should it become necessary to replace the • CD Laser Diode: AlGaInP main fuse, this must be replaced with a fuse of • Wave length: same value as indicated on the plug (example 10A). • BD: 405 +5nm/-5nm 1. Remove fuse cover and fuse. • DVD: 655 +10nm/-10nm 2. The replacement fuse must comply with • CD: 790
Streszczenie treści zawartej na stronie nr. 3
Contents 1 Important 4 Safety and important notice 4 Trademark notice 4 2 Your product 5 Feature highlights 5 Playable media 6 Product overview 6 3 Connect 7 Connect video/audio cables 7 Route audio to other devices 8 Connect a USB device 9 Connect network 9 Connect power 9 4 Get started 9 Prepare the remote control 9 Find the TV input 10 Use the Home menu 10 Navigate the menu 10 Select a menu display language 10 Set up a network 10 Use Philips EasyLink 11 5 Play 11 Play a disc 11 Play from a US
Streszczenie treści zawartej na stronie nr. 4
Please inform yourself about the local rules on 1 Important separate collection of batteries because correct disposal helps to prevent negative consequences for Safety and important notice the environmental and human health. Copyright notice Warning • Risk of overheating! Never install the product in a confined space. Always leave a space of at least 4 inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. This item inc
Streszczenie treści zawartej na stronie nr. 5
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; Java and all other Java trademarks and logos 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567; are trademarks or registered trademarks of Sun 7,333,929; 7,212,872 & other U.S. and worldwide Microsystems, Inc. in the United States and/or other patents issued & pending. DTS is a registered countries. trademark and the DTS logos, Symbol, DTS-HD and HTS-HD Master Audio are trademarks of DTS, Inc. © 1996
Streszczenie treści zawartej na stronie nr. 6
Remote control Playable media This product can play: a • BD-Video, BD-R/RE2.0 • DVD, DVD-Video, DVD+R/+RW, DVD-R/- q RW, DVD+R/-R DL (Dual Layer) • Video CD/SVCD • Audio CD, CD-R/CD-RW, MP3 media, WMA b media, JPEG files c p • DivX (Ultra) media • USB flash drive d Region codes e You can play discs with the following region codes. Region code Countries o f DVD Blu-ray n Europe, g United Kingdom m h l k Product overview Main unit j i ab cdefgh a a • Turn on this product or switch to
Streszczenie treści zawartej na stronie nr. 7
g / Note • Skip to the previous or next title, chapter, or track. • Refer to the type plate at the back or bottom of the product for identification and supply ratings. h / • Before you make or change any connections, ensure that • Search backward or forward. all the devices are disconnected from the power outlet. i SUBTITLE • Select a subtitle language on a disc. j AUDIO Connect video/audio cables • Select an audio language or channel on Select the best video connection that the TV can suppor
Streszczenie treści zawartej na stronie nr. 8
Option 2: Connect to the component 1 Connect a composite video cable to: • the VIDEO jack on this product. video jack • the VIDEO input jack on the TV. 2 Connect the audio cables to: AUDIO IN Pr Pb Y • the AV OUTPUT-L/R jacks on this product. • the AUDIO input jacks on the TV. Tip • The video input jack on the TV might be labeled as A/V IN, VIDEO IN, COMPOSITE or BASEBAND. Route audio to other devices You can route the audio from this product to other devices. Connect to an HDMI-complia
Streszczenie treści zawartej na stronie nr. 9
1 Connect a coaxial cable (not supplied) to: 1 Connect a network cable (not supplied) to: • the COAXIAL jack on this product. • the LAN jack on this product. • the COAXIAL/DIGITAL input jack on • the LAN jack on the broadband modem the device. or router. Connect an analogue stereo system Note AUDIO IN • Internet access to Philips website for software update may not be allowed, depending on the router you use or the Internet Service Provider’s policy. Contact your Internet Service Provider
Streszczenie treści zawartej na stronie nr. 10
Select a menu display language Note • If this product is connected to a HDMI CEC compliant TV, skip this setting. It switches automatically to the same OSD menu language as per your TV setting (if the language set on TV is supported by this product). Note 1 In the Home menu, select [Setup] and press OK. • If you are not going to use the remote control for a long 2 Select [Preference Setup], and press . time, remove the batteries. • Do not mix batteries (old and new or carbon and 3 Select
Streszczenie treści zawartej na stronie nr. 11
One-touch standby Network Installation Video Setup View Network Settings 1 Press and hold (standby) for more than 3 Audio Setup seconds. » All the connected devices (if the device Network Setup supports one-touch standby) automatically EasyLink Setup switch to standby. Preference Setup Note Advanced Setup • Philips does not guarantee interoperability with other HDMI CEC devices. 4 Select [Network Setup], and press . 5 Select [Network Installation], and press OK. 6 Follow the on-screen in
Streszczenie treści zawartej na stronie nr. 12
Play from a USB device Button Action Pause play. Play or view media files on the following USB devices: • Press repeatedly to • flash drive slow forward play frame • memory card reader by frame. • HDD (This product can detect only a portable Start or resume play. hard disc drive with USB power peak current no more than 500mA.) Stop play. Skip to a previous/next title / or chapter. Search fast-backward or fast- / forward. Press repeatedly to change the search speed. • Press once , and then
Streszczenie treści zawartej na stronie nr. 13
BD-video disc • To cancel zoom mode, press BACK • TOP MENU stop the video play and shows or OK to display the zoom factor bar, the disc menu. This feature is disc-dependent. and press the Navigation buttons ( ) • POP-UP MENU access to the BD-video disc until the zoom factor [x1] is selected. menu without interrupting disc play. Repeat play for a specific section DVD-video disc • TOP MENU display the root menu of a disc. 1 During play, press OPTIONS . • DISC MENU display disc information an
Streszczenie treści zawartej na stronie nr. 14
Play BD-video 4 Select a title to play, and press OK. 5 Use the remote control to control the play. Blu-ray video disc has a larger capacity and supports features such as high-definition videos, multi- Button Action channel surround sounds, interactive menus and so on. AUDIO Select an audio language or channel. 1 Insert a BD-video disc. 2 Press , select [play Disc] and press OK. SUBTITLE Select a subtitle language. 3 Play automatically starts, or select a play Stop play. option in the menu a
Streszczenie treści zawartej na stronie nr. 15
Control photo play Button Action 1 Play a photo slideshow. Pause play. 2 Use the remote control to control the play. Start or resume play. • Press OPTIONS to access play Stop play. options, select an option, and press OK. Skip to a previous/next track. / • During slideshow play, you may also press to flip a photo horizontally/vertically. Select an item to play. • If the slideshow stops, press to continue play. Set slideshow interval and animation 1 During play, press OPTIONS. Search fast-
Streszczenie treści zawartej na stronie nr. 16
6 Adjust settings Note • If [4:3 Panscan] you have selected is not supported by the disc, the screen displays in the [4:3 Letterbox] format. Note [HDMI Video] • If the setup option is grayed out, it means the setting Select an HDMI video output resolution that is cannot be changed at the current state. compatible with your TV display capability. • [Auto] - Detect and select the best supported video resolution automatically. Video setup • [Native] - Set to original video resolution. 1 Press .
Streszczenie treści zawartej na stronie nr. 17
• [Vivid] – Vibrant color setting. [HDMI Audio] • [Cool] - Soft color setting. Select an HDMI audio output when you connect • [Action] – Sharp color setting. It enhances this product and the TV/audio device with an HDMI the details in the dark area. Ideal for action cable. movies. • [Bitstream] – Select the best original HD • [Animation] – Contrast color setting. Ideal for audio experience (only via an HD audio animated pictures. compatible receiver). • [Auto] – Detect and select the best s
Streszczenie treści zawartej na stronie nr. 18
[One Touch Standby] 4 Select an option, then press OK. When you press and hold (standby), all the 5 Select a setting, then press OK. connected HDMI CEC devices (if the device • To return to the previous menu, press supports one-touch standby) switch to standby BACK. mode simultaneously. • To exit the menu, press . • [On] - Turn on one-touch standby feature. [Network Installation] • [Off] - Disable one-touch standby feature. Install the network connection. [View Network Settings] Note Displ
Streszczenie treści zawartej na stronie nr. 19
[Auto Standby] Note Turn on or off auto standby mode. It is an energy saving feature. • If the language you have set is not available on the disc, • [On] - Switch to standby after 30 minutes the disc uses its own default language. • For some discs, the subtitle/audio language can only be of inactivity (for example, in pause or stop changed from the disc menu. mode). • [Off] - Disable auto standby mode. [Parental Control] [VCD PBC] Restrict access to discs that are unsuitable for Turn on
Streszczenie treści zawartej na stronie nr. 20
• [USB] - Update software from the USB device 1 Press . which is connected to this product. 2 Select [Setup], and press OK. • [Network] - Update software from the 3 Select [Advanced Setup] > [Version Info.], internet. and press OK. Note Update software via network 1 Set up the internet connection (see “Get • For detailed software updating, see “Additional started’ > “Set up a network”). information” > “Update software”. 2 In the Home menu, select [Setup] > [Clear Memory] [Advanced Setup]
