Streszczenie treści zawartej na stronie nr. 1
ENT
ESC
T E C H N O L O G I E S
User Guide
1:7 Blu-Ray / DVD Duplicator
(DDU7SAS)
www.addonics.com
v7.1.11
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
Streszczenie treści zawartej na stronie nr. 2
ENT ESC Diagram Source SATA Port 7 Destination (top port) SATA Ports 15-pin SATA Power Connector Mounting Holes (2 on each side) LCD Scroll Up Duplicator Panel ENT Executes Function ESC Cancels Function Scroll Down www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Streszczenie treści zawartej na stronie nr. 3
Quick Guide Installing the 1:7 optical duplicator Step 1 Insert the 1:7 Blu-Ray / DVD Duplicator into standard 5.25” drive bay. Step 2 Connect the power cable from you system to the 4-pin floppy power connector. Step 3 Connect the source drive to the source SATA port via SATA cable and the target drives to the destination SATA port via SATA cable. Step 4 Screw the duplicator into the drive bay with 4 screws (2 on each side). Duplicating drive(s) Make sure the source and target drives are con
Streszczenie treści zawartej na stronie nr. 4
Panel Functions LCD Scroll Up Duplicator Panel ENT Executes Function ESC Cancels Function Scroll Down The Duplicator has 6 functions to choose from: 7.1 Source 9.1 Load 1. Copy 7.2 Target 9.2 Delete Image 2. Test 9.3 Image Info 3. Test & Copy 9.4 Compare Image 4. Verify 9.5 Select Image 5. Compare 9.6 Image Src Drvie 6. Prescan 9.7 ImageFormat Info 7. Disc Info 9.8 Edit 9.9 Format HDD 8. Select Source 9.10 LoadImage Method 9. Image 10. Edit Track 10.1 CD to CD Edit 10.2 CD to HDD Edit 11. Lights
Streszczenie treści zawartej na stronie nr. 5
1. Copy Function#1 Copy, instant copy source (disc/image) to the target drives (optical writes). Use Function#8 to select source drive before copying. Select function#1. place a source disc into source drive and blank disc into the target drives. A rewriteable disc can be used as target media, however all data will be erased before copying. Press ENT to start copy function when all discs are ready. After complete, system will show spent time and the amount of OK disc on the screen, the OK d
Streszczenie treści zawartej na stronie nr. 6
9. Image Function#9 Image is valid only when a hard disk is installed. Disc is loaded to hard disk as an image file. 9.1 Load Load function loads whole disc data from any writers into the current partition of the hard disk. “P:A” means current partition is A. 9.2 Delete Image If you want to delete an image file stored in a particular partition, you can use this function to delete image. Press ENT , the system will confirm with you for the action, use ▲ ▼ to select Yes or No, then press ENT for
Streszczenie treści zawartej na stronie nr. 7
9.9 Format HDD Hard disk must be formatted by the system for the very first time. Hard disk will be partitioned into the chosen partition format. If no hard disk is installed, LCD will show the message as No Valid HDD! All data on the hard drive will be erased after the hard disk format. After the hard drive is formatted correctly, LCD will show “ Format HDD ok!.”, Press ENT to verify HDD or press ▼ and choose No return back to menu. 9.10 LoadImage Method This function is to change the way to
Streszczenie treści zawartej na stronie nr. 8
10.3 Close Session Single session format is used for Audio CD, and commercial audio player is not able to play open session audio CD, therefor session must be closed to max. playback compatibility. However, no more tracks can be added once session is closed. 11 LightScribe (Optional Function) LightScribe is an optical disc recording technology that uses specially coated recordable CD and DVD media to produce laser-etched labels with text or graphics, as opposed to stick-on labels and printable d
Streszczenie treści zawartej na stronie nr. 9
To select any function from #1 to # 13 as the first item appears on the screen whenever system is turned on. 12.6 Auto Verify To set if auto verify target disc's readability after copy function. The default is Off. Press ▼ to select On. 12.7 Auto Compare To set if auto do comparison after copy function to check if source and target disc are identical. The default is Off. Press ▼ to select On. 12.8 Auto Prescan To set if auto scan source disc before copy function. The default is Off. Press ▼ to s
Streszczenie treści zawartej na stronie nr. 10
12.19 Quick Compare Quick Compare is related to function#5 Compare. Once compare error byte reach to the setting figures, compare process will stop. 12.20 Link Mode Select (Select Models) Now press ESC and ▼ to enter the following screen. Press ENT to enter the “Link Mode Select” screen. Use ▲ ▼ to choose between the Stand Alone, Middle Tower or Last Tower modes as appropriate. Attention: Once a tower has been set as Middle Tower or Last Tower and the J14 jumper is also set to Target mode, t
