Streszczenie treści zawartej na stronie nr. 8
CHAPTER 3 | Installation The EZ Connect™ Wireless Cable Modem Gateway can be installed in any location where you have cable internet access, and the cable internet service provider has approved the EZ Connect™ Wireless Cable Modem Gateway. To confirm you meet these 2 criteria points, please contact your local ISP. For general installation please follow the guidelines outlined below to best performance: • Keep the Wireless Cable Modem Gateway away from any heating devices. • Do not
Streszczenie treści zawartej na stronie nr. 9
3.2 | Basic Installation Procedure 1. Connect the LAN: You can connect the Wireless Cable Modem Gateway to your PC, or to a hub or switch. Run Ethernet cable from one of the LAN ports on the rear of the Wireless Cable Modem Gateway to your computer’s network adapter or to another network device. You can also connect the Wireless Cable Modem Gateway to your PC (using a wireless client adapter) via radio signals. Note: It is recommended that for first-time setup you use a wired connec
Streszczenie treści zawartej na stronie nr. 10
CHAPTER 4 | Configuring your Computer The information outlined in this chapter will guide you through the configuration for the following Operating Systems: • Windows 95/98 • Windows Me • Windows 2000 • Windows XP • Apple Macintosh 4.1 | Configuring Windows 95/98/Me 1. Access your Network settings by clicking [Start], choose [Settings], and then select [Control Panel]. 2. In the Control Panel, locate and double-click the [Network] icon. 3. Highlight the TCP/IP line that
Streszczenie treści zawartej na stronie nr. 11
4.2 | Configuring Windows 2000 1. Access your Network settings by clicking [Start], choose [Settings], and then select [Control Panel] 2. In the Control Panel, locate and double- click the [Network and Dial-up Connections] icon 3. Locate and double-click the [Local Area Connection] icon for the Ethernet adapter that is connected to the Gateway. When the Status dialog box window opens, click the [Properties] button. 4. On the [Local Area Connection] Properties box, verify the
Streszczenie treści zawartej na stronie nr. 12
4.3 | Configuring Windows XP The following instructions assume you are running Windows XP with the default interface. If you are using the Classic interface (where the icons and menus look like previous Windows versions), please follow the instructions for Windows 2000 outlined above. 1. Access your Network settings by clicking [Start], choose [Control Panel], select [Network and Internet Connections] and then click on the [Network Connections] icon. 2. Locate and double-click the
Streszczenie treści zawartej na stronie nr. 13
CHAPTER 5 | Configuring the Wireless Cable Modem Gateway After you have configured TCP/IP on a client computer, use a web browser to configure the EZ Connect™ Wireless Cable Modem Gateway. The Gateway can be configured by any Java- supported browser including Internet Explorer 5.0 or above, or Netscape Navigator 5.0 or above. Using the web management interface, you may configure the Wireless Cable Modem Gateway features and view statistics to monitor network activity. Before you atte
Streszczenie treści zawartej na stronie nr. 14
5.3 | Accessing the Wireless Cable Modem Gateway’s Web Management To access the Wireless Cable Modem Gateway’s web-based management screens, follow the steps below: 1. Launch your web-browser. NOTE: Your computer does not have to be ONLINE to configure the Wireless Cable Modem Gateway. 2. In the Address Bar, type: http://10.1.10.1 Note: For some browsers, it may be necessary to include:88 after the management IP address. For example: http://10.1.10.1:88 3. When
Streszczenie treści zawartej na stronie nr. 15
CHAPTER 6 | Navigating the Web-based Administration The EZ Connect™ Wireless Cable Modem Gateway’s management interface allows you to configure both basic and advanced features and options. Some of these advanced functions include: hacker attack detection, IP and MAC address filtering, intrusion detection, virtual server setup, virtual DMZ hosts, as well as other advanced functions. 6.1 | Making Configuration Changes Once a configuration change has been made on a page, be sure to click
Streszczenie treści zawartej na stronie nr. 16
6.4 | LAN From this section you can configure the following settings: • The private LAN settings, including the IP address of your Wireless Cable Modem Gateway • The IP Address Pool range for DHCP clients • Enable or Disable the integrated DHCP server • Configure the DHCP Lease time for your DHCP clients To access the LAN configuration page, on the Side Navigation bar, click on [LAN] link. LAN IP Use the LAN section to configure the LAN IP address for the Wireless Cable Mode
Streszczenie treści zawartej na stronie nr. 17
IP Address Pool A dynamic IP start address may be specified by the user, e.g. 10.1.10.1 (default value). Once this start IP address has been assigned, IP addresses running from 10.1.10.10 to 10.1.10.199 will be part of the dynamic IP address pool. IP addresses from 10.1.10.200 to 10.1.10.253 will be available as static IP addresses. Note: Do not to include the address of the EZ Connect™ Wireless Cable Modem Gateway (10.1.10.1 – default IP) in the client address pool. 6.6 | NAT N
Streszczenie treści zawartej na stronie nr. 18
Predefined Service The Predefined Service option has a pull-down menu with several popular Service Applications, such as HTTP (80), FTP (20/21), and AIM/ICQ (5190). To configure the virtual server for a Predefined Service, follow the steps below: 1. Select the [Service] that you want to have access through the firewall to your LAN from the pull-down menu. 2. Enter in the [LAN Server IP] for the LAN PC that is running this service or application 3. You can also configure [Remote
Streszczenie treści zawartej na stronie nr. 19
2. Configure the Traffic or Data [Type] that you want to forward 3. Set the [LAN Server IP] of the PC that you want this traffic/data redirected to 4. You can also configure [Remote IPs] option to allow access to this specific port from the WAN side. This can be configured for 3 different access types: a. Any IP Address [Any] – choose this option to allow access to any public IP address. b. Single IP Address [Single Address] – choose this option to allow access to a single public IP add
Streszczenie treści zawartej na stronie nr. 20
6.7 | Firewall The Wireless Cable Modem Gateway provides a stateful inspection firewall (SPI), which is designed to protect against Denial of Service (DoS) attacks when activated. Its purpose is to allow a private local area network (LAN) to be securely connected to the Internet. To provide a flexible solution, the firewall section has the following features: 6.7.1 | Access Control Access Control allows users to block access to users on your network from the Internet. Access Rules can b
Streszczenie treści zawartej na stronie nr. 1
EZ Connect™ Wireless Cable Modem Gateway
Install Guide
SMC8013WG
Streszczenie treści zawartej na stronie nr. 2
Copyright Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SMC. SMC reserves the right to change specifications at any time without notice. Copyright © 2003 by SMC Networks, Inc. 38 Tesla Irvine, Calif
Streszczenie treści zawartej na stronie nr. 3
TABLE OF CONTENTS CHAPTER 1 | Introduction Features and Benefits Package Contents Minimum Requirements CHAPTER 2 | Getting to know the Wireless Cable Modem Gateway LED Indicators Rear Panel Description Resetting and Restoring the Wireless Cable Modem Gateway CHAPTER 3 | Installation Basic Installation Procedure CHAPTER 4 | Configuring your Computer Configuring Windows 95/98/Me Configuring Windows 2000 Configuring Windows XP Configuring a Macintosh Compute
Streszczenie treści zawartej na stronie nr. 4
CHAPTER 1 | Introduction Congratulations on your purchase of the EZ Connect™ Wireless Cable Modem Gateway. SMC is proud to provide you with a powerful yet simple communication device for connecting your local area network (LAN) to the Internet. 1.1 | Features and Benefits • EZ 3-Click Installation Wizard - A new and improved way to install your Gateway Modem. In 3 simple clicks, you will be connected to the Internet. • Internet connection to cable modem service via an integrated ca
Streszczenie treści zawartej na stronie nr. 5
1.2 | Package Contents Before installing the EZ Connect™ Wireless Cable Modem Gateway, verify that you have the items listed under below. Also be sure that you have the necessary cabling. If any of the items are missing or damaged, contact your local SMC distributor. • 1 - Wireless Cable Modem Gateway • 1 - Power adapter (9V/1A) • 1 - CAT-5 Ethernet cable • 1 - USB Cable • Installation CD, including: o User Guide o USB Drivers o BSafe Online© Parental Control Software If possi
Streszczenie treści zawartej na stronie nr. 6
CHAPTER 2 | Getting to Know the Wireless Cable Modem Gateway The EZ Connect™ Wireless Cable Modem Gateway is the perfect all in one solution, for the home or business environment. This full-featured device has: • An approved DOCSIS 1.1 Cable modem • Advanced SPI Firewall Gateway • High-speed Turbo 11/22 Mbps Wireless Access Point • Comprehensive LEDs for network status and troubleshooting • Reset Button • 4 – 10/100 Mbps Auto-Sensing LAN ports with Auto-MDI MDIX feature • 1 – USB
Streszczenie treści zawartej na stronie nr. 7
2.2 | Rear Panel Description LAN CATV Ports Connector Power Wireless Card Reset USB Button Item Description Power Connect the included power adapter to this port. Reset Use this button to reset the power or restore the default factory settings. LAN 1-4 Four 10/100 Auto-sensing switch ports (RJ-45). Connect devices on your local area network to these ports (such as a PC, hub, or switch). USB Connect a USB Cable from your PC to this port. CATV Connect your cable line to this por
