Streszczenie treści zawartej na stronie nr. 1
EPSON Stylus Photo EX
paper support extension
Accessories
paper support
Ink Cartridges
Cartridge Part number
printer cover
edge
Black S020093
guides
control
Color S020110
panel
Media
Media name Size Part number
EPSON 360 dpi Ink Jet Paper Letter S041060
A4 S041059
EPSON High Quality Ink Jet Letter S041111
Paper A4 S041117
output tray
EPSON Photo Quality Ink Jet Letter S041062
output tray
Paper A4 S041061
extensions
Ledger/B S041070
Legal S041067
load/eject
ink cartridge
EPSON Photo Quality
Streszczenie treści zawartej na stronie nr. 2
EPSON Stylus Photo EX Ink Cartridge Printer Specifications Black ink cartridge Color ink cartridge Specification (S020093) (S020110) Printing Color(s) Black Cyan, Magenta, Yellow, Light Magenta, Light Cyan Printing method EPSON’s exclusive drop-on-demand ™ Micro Piezo ink jet technology Print capacity* 540 pages/A4 (ISO/IEC 220 pages (A4, 360 dpi, 10561 Letter Pattern at 5% duty each color) Nozzle configuration 360 dpi) Cartridge life 2 years from production date (if unopened) Black 32 nozzl
Streszczenie treści zawartej na stronie nr. 3
EPSON Stylus Photo EX Paper Paper type Size Paper types Thickness Weight Single sheets Letter (8.5 × 11 inches) Plain bond paper and 0.003 to 0.004 inch 17 to 24 lb (64 to 2 Legal (8.5 × 14 inches) special ink jet papers (0.08 to 0.11 mm) for 90 g/m ) for plain Ledger or B size (11 × 17 inches) distributed by EPSON plain bond paper bond paper Statement (5.5 × 8.5 inches) Executive (7.5 × 10 inches) A3 (297 × 420 mm) A4 (210 × 297 mm) A5 (148 × 210 mm) B4 (257 × 364 mm) B5 (182 × 257 mm) Trans
Streszczenie treści zawartej na stronie nr. 4
EPSON Stylus Photo EX Printable area A A B-L B-R B-L C B-R EPSON Panoramic Photo Paper A: The minimum top margin is 0.12 inch (3.0 mm). B-L, The minimum left margin is 0.12 inch (3.0 mm). C B-R: The minimum right margin is 0.54 inch (14.0 mm). single sheet C: The minimum bottom margin is 0.12 inch (3.0 mm). Note: Always load paper into the sheet feeder short edge first. However, envelopes should be loaded long edge first. A B-L B-R Mechanical C Paper feed envelope method Friction A: The minim
Streszczenie treści zawartej na stronie nr. 5
EPSON Stylus Photo EX Hardware initialization Electrical When the printer is turned on, the printer mechanism is Specification 120 V Model 220- 240 V Model* initialized and the input data buffer and print buffer are Input voltage 99 to 132 V 198 to 264 V cleared. Printer settings are returned to their default values. range** However, the printer mechanism is not initialized if the printer is turned on within ten seconds after turning it off. In Rated 50 to 60 Hz frequency range this case, t
Streszczenie treści zawartej na stronie nr. 6
EPSON Stylus Photo EX Bit rate: Approx. 900Kbps P S B A When the power and paper out lights flash Handshaking: X-ON/X-OFF and DTR protocol and the ink out lights are on, your printer has a carriage error. Turn off the printer by Word format: Data bit: 8 bits pressing the P power button; wait several Parity bit: None seconds; then turn it on again. If this does not Start bit: 1 bit clear the error condition, contact EPSON as Stop bit: 1 bit described in the User’s Guide.
Streszczenie treści zawartej na stronie nr. 7
EPSON Stylus Photo EX Caution: 5. Pull up the two ink cartridge clamps. (The illustration Never turn off the printer when the P power light is shows the color ink cartridge clamp.) flashing. But if the light is still flashing after five minutes and the printer isn’t moving or making noise, you may turn off the printer. Testing the Printer You can run a printer check to determine whether a problem comes from the printer itself or some other source. ❏ If the results are satisfactory,
Streszczenie treści zawartej na stronie nr. 8
EPSON Stylus Photo EX Then select this Printing on Special Media Media Type setting For this media Load a maximum of in your printer name... this many sheets... software... When you print on special media, you need to be careful about choosing the correct Media Type and Paper Size EPSON Photo Quality 30 (use a 1.2 inch top Photo Quality Glossy 2 Glossy Film margin and a support Film settings in your printer software. The following table lists the sheet) available EPSON media and the corre
Streszczenie treści zawartej na stronie nr. 9
EPSON Stylus Photo EX Warning: Replacing an Ink Cartridge If ink gets on your hands, wash them thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. Caution: To ensure good results, use genuine EPSON cartridges and do not refill them. Other products may cause Installing the New Cartridge damage to your printer not covered by EPSON’s Once you have removed the empty cartridge, you’re ready to warranty. install the new one. Follow these steps
Streszczenie treści zawartej na stronie nr. 10
EPSON Stylus Photo EX Replacing an Outdated Ink Cartridge Using the Head Cleaning Utility If an ink cartridge is more than six months old, you may need Follow these steps to run the utility: to replace it. How can you tell? You may notice that your 1. Make sure the printer is turned on but not printing, and the printouts don’t look as good as they used to. If print quality B black and A color ink out lights are off. doesn’t improve after cleaning and aligning the print head, 2
Streszczenie treści zawartej na stronie nr. 11
EPSON Stylus Photo EX 3. Clean the exterior of the printer with a soft, damp cloth. Examining the Nozzle Check Pattern Keep the printer cover closed so water doesn’t get inside. Examine the nozzle check pattern after printing it. It should 4. Clean ink out of the printer’s interior with a damp cloth. look something like this, with each of the six sections showing one of the ink colors: Caution: Don’t use the cleaning sheets that may be included with your special media; they may damage the pr
Streszczenie treści zawartej na stronie nr. 12
EPSON Stylus Photo EX 12 - EPSON Stylus Photo EX 3/98
