Instrukcja obsługi Sony XCD-SX910UV

Streszczenie treści zawartej na stronie nr. 1

Digital Interface
3-854-202-02 (1)
Owner’s Record English
The model and serial numbers are located on the bottom.
When installing the camera Fig. A
A
Record the serial number in the space provided below.
Black-and-White Digital
When you install the camera with various peripheral devices and if the
Refer to these numbers whenever you call upon your Sony
devices have different ground electric potential, ground only one device. In
dealer regarding this product.
case there is an ground electr

Streszczenie treści zawartej na stronie nr. 2

Digital Interface Installation E Fitting the lens Fig. E E 1 Remove the lens mount cap. 1 2 Screw in the lens (not supplied), and turn it until it is secured. 2 Note Clean the optical filter with a commercially available blower brush to remove dust. 1 Using a tripod Fig. F F To use the tripod, install the tripod adaptor VCT-ST70I (not supplied) on the camera module. VCT-ST70I Use a tripod screw with a protrusion (4) extending 2 from the installation surface, as follows: 4 4 ISO stan