Instrukcja obsługi Milwaukee ToolsSM102

Streszczenie treści zawartej na stronie nr. 1

• The HOLD function is activated by
OPERATION:
keeping pressed the HOLD key.
• The meter is supplied complete with a
Milwaukee
The measured value is frozen on
9V battery. Slide off the battery compart-
the display and the “HOLD” tag
ment cover on the back of the meter
USER MANUAL
lights up.
and install the battery while paying at-
tention to its polarity.
PORTABLE uP-BASED • After measurements, switch the
meter off and store the electrode
• Always remove the electrode protective
pH METER
with

Streszczenie treści zawartej na stronie nr. 2

BATTERY REPLACEMENT: SPECIFICATIONS: When the battery becomes so weak that RANGE -2.00 to 16.00 pH Note: Pressing the CAL key again will no reliable measurement can be guaran- change the required buffer value, -5 to 70°C making possible a single point cali- teed, the meter will display “Eb” for a while RESOLUTION 0.01 pH / 0.1°C bration at pH 4.01 or pH 10.01. and then turns off. ACCURACY (@25°C) ±0.02 pH / ±0.5°C It is recommended to replace immediately • Wait till the hourglass symbol on the T