Instrukcja obsługi PYLE Audio PADH1279

Streszczenie treści zawartej na stronie nr. 1



















 





 





















Streszczenie treści zawartej na stronie nr. 2

Introduction Thank you for purchasing this Pyle Pro PADH series speaker The loudspeaker is designed to provide you years of high performance in any application that you require. Please read this manual carefully to fully maximize the performance of the speaker. Maintenance and Safety · Do not expose the speaker to moisture. · Avoid hot and cold temperature extremes. · Clean using a damp cloth. Make sure that no moisture contacts the drivers. You can use a hand vacuum to clean th

Streszczenie treści zawartej na stronie nr. 3

There is a flush mounted 35mm speaker stand adapter on the bottom side of the cabinet. Connections Your PADH series speaker has an extremely flexible connection panel. There are two Speakon jacks as well as two ¼” jacks. You can also hookup your speaker cabinet using the “Quick Connect” speaker terminals, which accommodate either wire leads or a banana plug. The jacks are wired in parallel, which allows you to daisy chain additional speakers. Thus you can use one amplifi

Streszczenie treści zawartej na stronie nr. 4

choosing an amplifier to drive your PADH series speaker. While it is true that an amplifier with a higher power rating can damage the drivers, under- powering can be even more dangerous. When an amplifier is overdriven and starts distorting, it generates transient frequencies that are much louder than the program material. These wayward frequencies could damage your speaker. A proper match is an amplifier which could drive the speaker up to the cabinet’s RMS rating, without exceeding the am

Streszczenie treści zawartej na stronie nr. 5

Troubleshooting No Sound:
 Check connections
 Try a different speaker cable
 Check levels on amplifier
 Confirm amplifier is getting a signal (check signal LED, or use headphone output) Intermittent Output:
 Check connections
 Try a different speaker cable Weak Bass:
 Check the polarity of the speaker connection. It may be reversed.
 Listen with headphones to confirm the amplifier is being sent a good signal. Distorted Sound:
 Check if the amplifi

Streszczenie treści zawartej na stronie nr. 6

Typical Setup Parallel Setup


  6

Streszczenie treści zawartej na stronie nr. 7

Recommended Accessories










 


  



 

   
)& , -.)
  & 
  ! " 
/0 -&

" #$

   . 
   1"23








 
%&'(
)& "


 

** 




 

)& , -.)
  &