Instrukcja obsługi BeachTek High Definition Adapter DXA-6HD

Streszczenie treści zawartej na stronie nr. 1

Specifica tions
Input Level MIC setting: -40 dBu typical
LINE setting: +4 dBu typical

Gain 40 dB
Output Level +18 dBu max
DXA- 6 HD
Frequency Response 20Hz to 20 KHz (-1 dB)
Operating Instructions for the DXA-6HD High Definition Adapter
THD + N Less than 0.03% @ 1 kHz, +4 dBu output
- For use on the Sony FX1
Signal-to-Noise Ratio 90 dB @ -10dBu input
Phantom Power Dual regulated 48 volt power supplies
Current to 14 mA (direct short)
Battery Type One 9 volt alkaline b

Streszczenie treści zawartej na stronie nr. 2

Front Panel Controls and Indicators Rear Panel Controls and Connections Mounting and Connection 4. MONO / STEREO Switch Mount the DXA-6HD securely to the tripod bushing on the under The MONO setting mixes both channels together and sends the side of your camcorder. Connect the cable from the DXA-6HD to the audio to both the right and left channels which is ideal when only one camcorder’s microphone jack. The onboard microphone should now microphone is being used. Stereo keeps both