Streszczenie treści zawartej na stronie nr. 1
STEP
1
STEP
2
Setup & Operation Guide
Guía de configuración y uso
STEP
3
STEP
4
Be sure to read and understand this guide before using the machine. We
recommend that you keep this guide nearby for future reference.
Asegúrese de leer este manual antes de usar la impresora. Le recomendamos
conservar este manual a mano para poder consultarlo como referencia en el futuro.
Reference Label Overview Installing the Software Getting started Introduction
® ®
For Macintosh For Windows
Streszczenie treści zawartej na stronie nr. 2
Thank you for purchasing the Brother QL-1060N. This guide briefly describes the steps to start using the Brother QL-1060N. See the User's Guide for details. The User's Guide can be found in the Manuals folder of the included CD-ROM. We strongly recommend that you read this guide carefully before using the Brother QL-1060N, and then keep it nearby for future reference. We provide service & support for users who register their products on our website. We recommend that you take this opportunity
Streszczenie treści zawartej na stronie nr. 3
® Brother Two-Year Limited Warranty and Replacement Service (USA Only) Who is covered: • This limited warranty ("warranty") is given only to the original end-use/retail purchaser (referred to in this warranty as "Original Purchaser") of the accompanying product, consumables and accessories (collectively referred to in this warranty as "this Product"). • If you purchased a product from someone other than an authorized Brother reseller in the United States or if the product was used (including
Streszczenie treści zawartej na stronie nr. 4
INTRODUCTION What Brother will do: If the problem reported concerning your Machine and/or accompanying Consumable and Accessory Items is covered by this warranty and if you first reported the problem to Brother or an Authorized Service Center within the applicable warranty period, Brother or its Authorized Service Center will repair or replace the Machine and/or accompanying Consumable and Accessory Items at no charge to you for parts or labor. The decision as to whether to repair or replac
Streszczenie treści zawartej na stronie nr. 5
Limitations: Brother is not responsible for damage to or loss of any equipment, media, programs or data related to the use of this Product. Except for that repair or replacement as described above, Brother shall not be liable for any direct, indirect, incidental or consequential damages or specific relief. Because some states do not allow the exclusion or limitation of consequential or incidental damages, the above limitation may not apply to you. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER
Streszczenie treści zawartej na stronie nr. 6
Important Information Should you have questions, or need information about your Brother Product, we have a variety of support options for you to choose from: USA-Customer Service: Customer Service 1-877-BROTHER (1-877-276-8437) Customer Service 1-901-379-1210 (fax) Website www.brother-usa.com Supplies / Accessories www.brothermall.com or 877-552-6255 BROTHER INTERNATIONAL CORPORATION 100 SOMERSET CORPORATE BLVD. BRIDGEWATER, NEW JERSEY 08807-0911 Record your model and serial number and your dat
Streszczenie treści zawartej na stronie nr. 7
1 Introduction Contents Introduction •••••••••••••••••••••••••••••••••••••••••••••••••••• 1 Contents••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 1 STEP 1 General Information ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 2 Safety Precautions •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 3 General Precautions •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 5 Getting started ••••••••••••••••••••••••••••••••••••••••••••••
Streszczenie treści zawartej na stronie nr. 8
Introduction 2 General Information Compilation and Publication Notice Under the supervision of Brother Industries Ltd., this guide has been compiled and published, covering the latest product’s descriptions and specifications. The contents of this guide and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (includin
Streszczenie treści zawartej na stronie nr. 9
3 Safety Precautions Read and understand all of these instructions and save them for later reference. Follow all warnings and instructions marked on the product. Warning Tells you what to do to avoid the risk of injury. STEP 1 Tells you about procedures you must follow to prevent damage to the machine. Caution The symbols used in this guide are as follows: Action NOT allowed to do DO NOT disassemble the product. DO NOT splash the product with or DO NOT touch a given portion of the immerse th
Streszczenie treści zawartej na stronie nr. 10
Introduction 4 Warning Follow these guidelines to avoid fire, electric shock, or other damage. Power Cord Use only the authorized power source Do not cut, damage, alter or place heavy (120V AC) for the machine. objects on the power cord. Use only the power cord included with Do not use the power cord if it is the machine. damaged. Do not handle the power cord or plug if Ensure the power cord is correctly your hands are wet. inserted into the electrical outlet. Do not overload the electric
Streszczenie treści zawartej na stronie nr. 11
5 General Precautions The Machine • Never disassemble the machine or allow it to get wet to avoid possible fire or electrical shock. Do not unplug the power cord from or plug it into the electrical outlet with wet hands. Doing so could cause an electrical shock or fire. STEP • Do not touch the cutter. Personal injury could result. 1 • The machine is a precision machine. Do not drop, hit or otherwise bang the machine. • Do not lift the machine by the DK Roll compartment cover. The cover could
Streszczenie treści zawartej na stronie nr. 12
Introduction 6 • As the end of the DK Roll is designed to not adhere to the label spool, the last label may not be cut properly. If this happens, remove the remaining labels, insert a new DK Roll, and reprint the last label. Note: To account for this, the number of DK Labels included on each DK Roll may be more than indicated on the package. • If a label is removed after begin applied to a surface, some portion of the label may remain. Remove the remaining portion before attaching a new labe
Streszczenie treści zawartej na stronie nr. 13
7 Getting started 1 Unpacking the QL-1060N Check that the package contains the following before using the QL-1060N. If any item is missing or damaged, contact your Brother dealer. STEP QL-1060N 1 USB cable SETUP & OPERATION GUIDE STEP 2 CD-ROM DK Label & Tape Guide STEP AC Power cord Warranty Card 3 DK Roll (Starter roll) Label tray STEP 4 The QL-1060N includes two starter rolls of : • One starter roll of DK Die-cut 4" X 6" (102mm × 152mm) Labels • One starter roll of DK Continuous Paper Tape
Streszczenie treści zawartej na stronie nr. 14
STEP1 Getting started 8 2 Parts Description Main Printing Unit Front Rear DK Roll compartment cover LED lamp ON/OFF button CUT button Serial port USB port FEED button LAN port Power cord 3 Setting the DK Roll Press and hold the ON/OFF button to turn 1 the QL-1060N off. Pull up the left and right levers on the machine under the top cover, and open the cover. Put the spool into the spool guides in the DK 2 Roll compartment. • Make sure that the spool arms are inserted firmly in the spool g
Streszczenie treści zawartej na stronie nr. 15
9 Thread the end of the DK Roll into 3 the slot until it can be seen from the other side. When unable to thread the end of the DK Roll into the slot, thread it as far as possible, and then close the cover. STEP Press the ON/OFF button to turn the 1 QL-1060N on, and then press the FEED button to set the roll. Close the DK Roll compartment cover until it 4 clicks right and left side. STEP 2 4 Connecting the Power Supply Connect the power cord to the QL-1060N and then plug the power STEP
Streszczenie treści zawartej na stronie nr. 16
STEP1 Getting started 10 5 Installing the Label Tray The machine contains a label tray which can hold up to 10 individual label sheets. As shown right, install the label tray to the front face of the machine. • When printing more than 10 labels continuously using the auto cut function, remove the paper guide to prevent a paper jam. 6 Using Interface Cable RS-232C cable and Network cable are not standard accessories. Prepare the appropriate cable for your interface. • USB cable Use the encl
Streszczenie treści zawartej na stronie nr. 17
11 Installing the Software Installing the Software ® 1. When using Microsoft Windows This section explains how to install the P-touch Editor 5.0, P-touch Address Book 1.1, STEP Printer Driver, and User's Guide as a whole. 1 The procedure for installing them varies depending on the OS of the computer. ® The following is the example for Windows Vista . Install procedure is subject to change without notice. Start the computer and put the CD-ROM into the CD-ROM drive. 1 If it does not start up autom
Streszczenie treści zawartej na stronie nr. 18
STEP2 Installing the Software 12 Put a check mark in the box to install the 5 Add-in and click [Next]. ® Make sure that you closed all Microsoft ® Office applications. For details on the Add-in, see the "User's Guide (PDF)". Click [OK]. 6 Then, choose your connection method and click [Next]. For USB interface cable users 7-1 Choose Local Printer with USB cable and click [Next]. 7-2 Follow the on-screen instructions. When this screen appears, make sure to turn on the power. Connect the US
Streszczenie treści zawartej na stronie nr. 19
13 For Network interface cable users 7-1 Choose Brother Peer-to-Peer Network Printer, and then click [Next]. Check that LAN cable and the machine are connected. STEP 1 7-2 Choose Search the network for devices and choose from a list of discovered devices (Recommended). Or enter your machine’s IP address or its node name. Click [Next]. STEP You can find your printer's IP address and the 2 node name by printing out the Printer Settings Page, please refer to the NETWORK USER'S GUIDE for d
Streszczenie treści zawartej na stronie nr. 20
STEP2 Installing the Software 14 7-2 Choose your printer's queue, and then click [OK]. Contact your administrator if you do not know the location or the name of the printer in the network Click [Next]. 8 • If you choose "Yes, display the page", you will go to the online user registration page before finishing the installation. (recommended) • If you choose "No, do not display the page", you will continue the installation. Click [Finish]. 9 Start the software. 10 • Click [Start] - [All Progra
