Instrukcja obsługi Canon LX RG1-1788

Streszczenie treści zawartej na stronie nr. 1

Canon LX MAINTENANCE KIT INSTRUCTIONS
The following parts are included in this maintenance kit:
1 Canon LX Fuser RG1-1788
1 Paper Feed Roller RF1-2394
1 Separation Pad RG1-l912
1 Transfer Roller RA1-7627
1 Pick Up Roller Assembly RG1-1792
1 Internal Access Door Assembly RG1-1791
2 Latex Gloves
Damage to the core can occur if it is packaged incorrectly. Re use this packaging to ship the core back.
A core charge will be applied if the core is received in non-repairable condition.
WARNING

Streszczenie treści zawartej na stronie nr. 2

Transfer Roller Assembly Replacement: Use The Latex Gloves When Replacing The Transfer Roller 1. Pull the blue gear from the transfer roller shaft. 2. Grasp the mounting bracket and gently, but firmly pull the transfer roller from the frame. Keep your hand over the top of the shaft to contain the shaft clip in case it pops off. Remove the transfer roller from the frame. 3. Snap the new transfer roller into place. The long end goes towards the resistor and mounting bracket. Use tweezers or