Streszczenie treści zawartej na stronie nr. 1
USER'S GUIDE
Matinee 1HD
HOME THEATER
PROJECTOR
Streszczenie treści zawartej na stronie nr. 2
Table of Contents Table of Contents 2 Video Input 24 Input Source Selection (Direct Operation) 24 Input Source Selection (Menu Operation) 25 To the Owner 3 Video System Selection (Video/S-Video) 26 Video System Selection (Y-Pb/Cb-Pr/Cr) 26 Image Level Selection (Direct Operation) 27 Image Level Selection (Menu Operation) 27 Image Level Adjustment 28 Safety Instructions 4 Screen Size Adjustment (Direct Operation) 30 Screen Size Adjustment (Menu Operation) 30 Computer Input / (RGB Scart 21-Pin Vid
Streszczenie treści zawartej na stronie nr. 3
To the Owner Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. If your projector seems to operate improperly, read this manual
Streszczenie treści zawartej na stronie nr. 4
Safety Instructions All the safety and operating instructions should be read before This projector should be operated only from the type of power the product is operated. source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or Read all of the instructions given here and retain them for later local power company. use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp
Streszczenie treści zawartej na stronie nr. 5
Safety Instructions Moving the Projector When moving the projector, close the front cover and retract the adjustable feet to prevent damage to the lens and cabinet. When the projector is not in use for an extended period, put it into a suitable case. CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR Do not drop or bump a projector, otherwise damages or malfunctions may result. When carrying a projector, use a suitable carrying case. Do not transport a projector by using a courier or tra
Streszczenie treści zawartej na stronie nr. 6
Compliance Federal Communication Commission Notice Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communic
Streszczenie treści zawartej na stronie nr. 7
Compliance Connecting the AC Power Cord This projector uses nominal input voltages of 100-120 V or 200-240 V AC. This projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power being supplied. Connect the projector with all perip
Streszczenie treści zawartej na stronie nr. 8
Feature and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. Short Zoom Lens 16 : 9 Wide Screen This projector is equipped with Short Zoom Lens which The projector is equipped with LCD panels of 16 : 9 ratio allows you to enjoy 100" screen size in range of 9.8' so that you can
Streszczenie treści zawartej na stronie nr. 9
Part Names and Functions Front CAUTION This projector is equipped with Cooling Fans for protection from overheating. Pay attention to the following to ensure proper ventilation and avoid a possible risk of fire and malfunction. Do not cover vent holes. Keep back and bottom clear of any object. Obstructions may block cooling air. EXHAUST VENTS TOP CONTROLS AND INDICATORS AIR INTAKE VENTS CAUTION Do not put heat-sensitive objects on the top. FRONT COVER AIR INTAKE VENTS INFRARED REMOTE
Streszczenie treści zawartej na stronie nr. 10
Part Names and Functions Bottom ADJUSTABLE FEET AND FEET LOCK LATCHES AIR INTAKE VENTS AND AIR FILTERS AIR INTAKE VENTS LAMP COVER CAUTION Do not put any objects at the bottom that could obstruct air circulation. Back TERMINALS POWER CORD CONNECTOR AND CONNECTORS MAIN ON/OFF See the caution below. SWITCH EXHAUST VENTS CAUTION Hot air is exhausted from the exhaust vents. When using or installing the projector, the following precautions should be taken. Do not put any flammable objects near
Streszczenie treści zawartej na stronie nr. 11
Part Names and Functions Terminal COMPUTER INPUT SERVICE PORT JACK TERMINAL This jack is used to service the projector. Connect the computer output to this jack. (Refer to page 18.) * S-VIDEO INPUT JACK VIDEO INPUT JACK COMPONENT VIDEO INPUT JACK Y-Pb/Cb-Pr/Cr (VIDEO) ( ) Connect the S-VIDEO output from video Connect the composite Connect the component video equipment to this video output from video outputs to Y, Pb/Cb, and Pr/Cr jack. (Refer to page equipment to VIDEO jack. jacks. 17.) (R
Streszczenie treści zawartej na stronie nr. 12
Part Names and Functions Top Controls and Indicators LAMP REPLACE INDICATOR WARNING TEMP. INDICATOR READY INDICATOR LAMP INDICATOR Turns yellow when the Flashes red when internal Lights green when the Becomes dim when the life of the projection projector temperature is projector is ready to be projector is turned on. lamp draws to an end. too high. (p46) turned on. It flashes And it is bright when (p44) green in Power the projector is in management mode. stand-by mode. (p43) WARNING READY TEM
Streszczenie treści zawartej na stronie nr. 13
Part Names and Functions Remote Control LIGHT BUTTON POWER ON-OFF BUTTON Used to light the following Used to turn the projector buttons for about 10 ON-OFF on or off. (p19) seconds: LIGHT, ON-OFF, AUTO PC ADJ. LIGHT AUTO, MENU, SCREEN, AUTO INPUT, and IMAGE. SCREEN BUTTON Used to select screen MENU SCREEN AUTO PC ADJ. BUTTON size. (p30, 41) Used to operate Auto PC Adjustment function. (p34) POINT BUTTONS SELECT Used to select an item or MENU BUTTON adjust value in the on- screen menu. The
Streszczenie treści zawartej na stronie nr. 14
Part Names and Functions Remote Control Batteries Installation Remove the battery Slide the batteries Replace the compartment lid. 1 2 3 compartment lid. into compartment. Two AA size batteries Pull up the lid For correct polarity (+ and and remove it. –), be sure battery terminals are in contact with pins in compartment. * When the batteries of the remote control are replaced, the remote control code automatically returns to the initial code (Code 2)(p43). To insure safe operation, please obse
Streszczenie treści zawartej na stronie nr. 15
Installation Positioning the Projector This projector is designed to project on a flat projection surface. ROOM LIGHT The projector can be focused from 3.6’(1.1m) ~ 19.7’(6.0m). The brightness in a room has a great influence on Refer to the figure below to adjust a screen size. picture quality. It is recommended to limit *The lens is at the top of the lens shift. ambient lighting in order to provide the best image. 19.7’(6.0m) 14.8’ (4.5m) 200” 9.8’ (3.0m) Max. Zoom 150” 3.9’(1.2m) 169” 1
Streszczenie treści zawartej na stronie nr. 16
Installation Moving the Lens The Projection lens can be moved up and down with manual lens shift function. This function makes it easy to provide a projected image where you want. U/D ratio can be adjusted from 10 : 0 ~ 0 : 10 (refer to the figures below). Turn the lens shift ring (left/right) left/right to move the lens leftward / LENS SHIFT RING rightward. (LEFT/RIGHT) Turn the lens shift ring (up/down) up/down to move the lens upward / downward. LENS SHIFT RING (UP/DOWN) LENS SHIFT UP/DOW
Streszczenie treści zawartej na stronie nr. 17
Installation Connecting to Video Equipment Cables used for connection • Scart-VGA Cable • Video Cable (RCA x 1 or RCA x 3) • S-VIDEO Cable *Only a video cable is included. Component video output equipment. Video Source (example) (such as DVD player or high-definition Video Cassette Recorder Video Disc Player TV source.) S-VIDEO Output RGB Scart Composite Component Video Output 21-pin Output Video Output (Y-Pb/Cb-Pr/Cr) S-VIDEO ✽ Scart-VGA Video Cable Video Cable Cable Cable (RCA x 1) (RCA x
Streszczenie treści zawartej na stronie nr. 18
Installation Connecting to a Computer Cables used for connection • VGA Cable (HDB 15 pin) ✽ • MAC Adapter (When connecting to Macintosh computer) ✽ ✽ option IBM-compatible computer or Macintosh computer (VGA / SVGA / XGA / SXGA) Desktop type Laptop type Monitor Output MAC ADAPTER (Not supplied) MAC Adapter ✽ Set slide switches Set switches as shown in the table ON according to the below depending on RESOLUTION ON DIP chart. 1 2 3 4 5 6 MODE that you want to use before you turn on projector an
Streszczenie treści zawartej na stronie nr. 19
Basic Operation Turning On the Projector Complete peripheral connections (with Computer, VCR, etc.) before turning on the projector. 1 Connect the projector's AC Power Cord into an AC outlet, and open the front cover. Turn the MAIN ON/OFF switch on. The 2 Open the front cover. LAMP indicator lights red, and the READY indicator lights green. The READY indicator does not light green with the front cover closed. MAIN ON/OFF switch Press the POWER ON-OFF button on the top control or on the 3 remot
Streszczenie treści zawartej na stronie nr. 20
Basic Operation Focus Adjustment Rotate the FOCUS RING to adjust the image focus. FOCUS RING Zoom Adjustment Move the ZOOM LEVER upward to make the image larger. Move the ZOOM LEVER ZOOM LEVER downward to make the image smaller. WIDE TELE 20
