Streszczenie treści zawartej na stronie nr. 1
MULTIMEDIA PROJECTOR
MODEL LC-X2U
LC-X2UL (Without Lens)
OWNER’S INSTRUCTION MANUAL
Streszczenie treści zawartej na stronie nr. 2
INFORMATION TO THE USER NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the owner’s manual, may cause harmful interference to radio com
Streszczenie treści zawartej na stronie nr. 3
IMPORTANT SAFETY INSTRUCTIONS All the safety and operating instructions should be read before b. If liquid has been spilled into the projector. the product is operated. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally by following Read all of the instructions given here and retain them for later the operating instructions. Adjust only those controls that use. Unplug this projector from AC power supply before are covered by the operating
Streszczenie treści zawartej na stronie nr. 4
TABLE OF CONTENTS PAGE NO SHOW FUNCTION 34 PAGE FEATURES AND DESIGN 5 P-TIMER FUNCTION 34 INTRODUCTION 5 AUTO IMAGE FUNCTION 34 COMPATIBILITY 5 CURSOR FUNCTION 34 IMAGE RESOLUTION 5 MENU OPERATION 35-36 AUTOMATIC MULTISCANNING SYSTEM 5 MODE SELECT 35 SCREEN MODE 5 SOUND ADJUSTMENT 36 MULTILANGUAGE 5 LANGUAGE ADJUSTMENT 36 UNPACKING THE PROJECTOR 5 VIDEO MODE . 37-39 TRADEMARKS 5 COLOR SYSTEM SELECT 37 VIDEO SOURCE SELECT 37 INSTALLATION 6-9 PICTURE IMAGE AD
Streszczenie treści zawartej na stronie nr. 5
FEATURES AND DESIGN INTRODUCTION The multimedia projector that combinesx powertul and sophisticated teatures with easy-to-use, intuitive controls. Built-in multimedia features include audio, a palette of 16.77 million colors and active matrix liquid crystal display (LCD) technology. The projector is ideal for high-performance business, training and imaging applications that demand exceptional color quality. COMPATIBILITY The projector is compatible with many different types of personal
Streszczenie treści zawartej na stronie nr. 6
Streszczenie treści zawartej na stronie nr. 7
• This projector is basically designed to project on a flat projection surface. • This projector can be focused from 4.9’ (1.5 m) ~ 80.7’ (24.6 m). • Refer to the figure below as an example when positioning the projector to the screen. THIS PROJECTOR SHOULD BE SET IN THE WAY INDICATED. NEVER HANG THE PROJECTOR, OR FALL DOWN ON ITS SIDE. IT MAY RESULT IN FIRE HAZARD. MOVE THE PROJECTED IMAGE POSITION Adjust the projected image (maximum 760 mm downward or upward on the
Streszczenie treści zawartej na stronie nr. 8
This projector is equipped with a cooling fan to protect it from overheating. Pay attention to the following to ensure the ventilation and avoid a possible risk of fire and malfunction. •Do not cover the vents with papers or other materials. •Keep the rear grill at least 3.3’ (1 m) away from any object. •Make sure that there are no objects under the projector. An object under the projector may prevent the projector from taking the cooling air through the bottom vent. Us
Streszczenie treści zawartej na stronie nr. 9
Your projector uses nominal input voltages of 100-120 VAC. The projector automatically selects the correct input voltage. The projector is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure what type of power is supplied to your building.
Streszczenie treści zawartej na stronie nr. 10
COMPUTER INPUT-1 TERMINAL (ANALOG HDB CONTROL PORT-1 CONNECTOR 1 8 15-PIN) Used to connect a mouse cable to the Used to connect a computer to the projector. projector. COMPUTER INPUT-1 RMINAL (DIGITAL MDR 20- CONTROL PORT-2 CONNECTOR 2 9 PIN) Used to connect a mouse cable to the Used to connect a computer to the projector. projector. COMPUTER INPUT-2 JACKS (BNC TYPE x 5) USB PORT-1 CONNECTOR 3 10 Used to connect a computer to the projector. Used to connect a computer to the projector.
Streszczenie treści zawartej na stronie nr. 11
VIDEO INPUT JACKS-1 (BNC TYPE x 3) AUDIO INPUT JACKS-2 (R and L) 14 19 Used to connect a video source to the Used to connect an audio source to the projector. projector. S-VIDEO INPUT JACK-1 VIDEO MONITOR OUTPUT JACKS (BNC TYPE x 15 20 Used to connect a S-VHS video source to the 3) projector. Permits video connection to a monitor. AUDIO INPUT JACKS-1 (R and L) VIDEO MONITOR (S-VIDEO) OUTPUT JACK 16 21 Used to connect an audio source to the
Streszczenie treści zawartej na stronie nr. 12
Personal computers can be connected to the HDB1 5-pin (VGA) terminal on the projector. • Connect the computer to these terminals using the VGA cable and VGA/MAC adapter (provided). CAUTION: For projectors, the VGA cable provided is designed to reduce RFI (Radio Frequency Interference) emissions. For regulatory compliance reasons, this cable must be used and must not be replaced by any other cable. Digital output signal from the computer can be connected to the DIGITAL terminal (MDR 20-
Streszczenie treści zawartej na stronie nr. 13
This terminal output the information of the selected computer source being viewed on the screen (Computer 1 or Computer 2). When video source (“Video 1” or “Video 2”) is selected, this terminal outputs Computer 1 input information. An external monitor can be connected to the HDB15-pin (VGA) terminal on the projector. • Connect the monitor to this terminal usinq the VGA cable (not provided). Pin No./Signal Pin No./Signal 9 Non 1 Red input Connect 2 Green input 10 Ground (Vert. sync
Streszczenie treści zawartej na stronie nr. 14
CONNECTING AN IBM-COMPATIBLE DESKTOP NOTE: When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on.
Streszczenie treści zawartej na stronie nr. 15
‘NOTE: When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on.
Streszczenie treści zawartej na stronie nr. 16
NOTE: When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on.
Streszczenie treści zawartej na stronie nr. 17
NOTE: When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on.
Streszczenie treści zawartej na stronie nr. 18
NOTE: When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on.
Streszczenie treści zawartej na stronie nr. 19
NOTE: When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on.
Streszczenie treści zawartej na stronie nr. 20
CONNECTING TO THE VIDEO INPUT JACKS (1 and 2) BNC TYPE x 3 Connect to the video outputs of a VCR, video disc player, DVD player, video camera, satellite TV tuner or other AV equipment. Connect video output from AV equipment to these jacks using the BNC cables. The video input can be connected 3 types of signals; “COMPOSITE VIDEO”, “Y/C SEPARATE VIDEO” and COMPONENT VIDEO {Y, Cb (B-Y), Cr (R-Y)}. Set VIDEO SOURCE of each video input (VIDEO IN-1 or VIDEO IN-2) to input video matter. (Refer
