Streszczenie treści zawartej na stronie nr. 1
LCD
Projector
User Manual
X 12 0
MODEL LVP-X120A
1
APPENDIX ESPAÑOL FRANÇAIS ENGLISH
Streszczenie treści zawartej na stronie nr. 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equi
Streszczenie treści zawartej na stronie nr. 3
Contents Important safeguards ...........................................................................4 Overview of the projector ......................................................................6 Overview of the remote control ............................................................8 Battery installation ............................................................................................. 9 Preparing the projector for operation ...............................................
Streszczenie treści zawartej na stronie nr. 4
Important safeguards 10. Power sources PLEASE READ ALL THESE INSTRUCTIONS RE- This projector should be operated only from the GARDING YOUR LCD PROJECTOR AND RETAIN type of power source indicated on the marking THEM FOR FUTURE REFERENCE. FOLLOW ALL label. If you are not sure of the type of power, WARNINGS AND INSTRUCTIONS MARKED ON please consult your appliance dealer or local THE LCD PROJECTOR. power company. 1. Read instructions 11. Power-cord protection All the safety and operating instructi
Streszczenie treści zawartej na stronie nr. 5
WARNING: Unplug immediately if there is Do not turn off the main power abruptly or unplug the projector something wrong with your projector. during operation. Do not operate if smoke, strange noise or odor comes It can lead to lamp breakage, fire, electric shock or out of your projector. It might cause fire or electric other trouble. shock. In this case, unplug immediately and contact your dealer. Place of installation Never remove the cabinet. For safety’s sake, refrain from setting the project
Streszczenie treści zawartej na stronie nr. 6
Overview of the projector focus ring Use to adjust the focus by turning it. See page 16. zoom ring Use to magnify (or reduce) by turning it. See page 16. remote control sensor (Front / Rear) exhaust slits PC card eject Press to eject the PC card. See page 23. PC card slot This is where you insert the PC card. See page 23. PC card slot cover button Press down to open the PC card slot. See page 23. release button Press to adjust the angle of projection. See page 11. handle Hold here to carry
Streszczenie treści zawartej na stronie nr. 7
Left side MAIN power RGB-OUT LINE-OUT RGB-IN LINE-IN I : ON S-VIDEO VIDEO L-AUDIO-R (MONO) INPUT O : OFF power jack See page 11. PC analog RGB input (mini D-SUB 15P) Use to input RGB signal from PC or component signal from DVD etc. See pages 12 - 14. line output (stereo mini jack) Use to output PC audio if the PC has a line input (stereo mini jack) live-level input, or Audio input. Use to input PC audio signals. See pages 13, 14. RS-232 input (Mini DIN 8P) PC analog RGB output Use to connec
Streszczenie treści zawartej na stronie nr. 8
Overview of the remote control The buttons with *mark work as same as the buttons on the projector. POWER * power card auto play RGB VIDEO PC CARD Press to start auto play function of the * input source PC CARD. See page 24. AUTO POSITION RELEASE AUTOPLAY auto position Use to adjust the position of Personal PC card release computer image. See page 16. Press this button to be able to eject PC MENU LASER * menu card. Make sure to press this button all the time to eject the PC card. See page
Streszczenie treści zawartej na stronie nr. 9
Battery installation Use two AA size batteries. 1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -). 3. Replace the back cover. 12 3 Important: • Do not use a new battery with an old one. • Load batteries in the correct position. • Do not heat, take apart, or throw batteries into fire. • Do not try to recharge batteries. Do not use rechargea
Streszczenie treści zawartej na stronie nr. 10
Preparing the projector for operation Orientation of the projector Picture size can be set by changing the distance between the screen and the projector. Front projection To find the approximate distance screen between the projector and screen: Multiply the width of the screen ✕ 2.0 (max.) , Multiply the width of the screen ✕ 2.5 (min.). • Refer to the chart to recom- mended distances in maximum zoom and minimum zoom. (between the screen and the L head of the projector) Distance from scre
Streszczenie treści zawartej na stronie nr. 11
Adjusting the angle of projection Getting ready for projection Screen on a flat wall with a 90 degree angle to the floor 1. Connect the power cord provided to the projector. by adjusting two Adjustment feet on the bottom of the 2. Connect the power cord to the wall outlet. projector. If the angle cannot be corrected by them, adjust the height and angle of screen. Plug in the provided power cord directly. ground terminal 3. Take off the lens cap. Adjustment foot screen (up and down) Warning: • D
Streszczenie treści zawartej na stronie nr. 12
ON DIP 1 2 3 4 5 6 Basic connections This projector can be connected to equipment such as VCRs, video cameras, videodisc players, and personal comput- ers having analog RGB input. Important: • Make sure that your equipment is turned off before connection. • Match the color of video and audio plugs on the AV cable with each terminal. • Plug in firmly and unplug by holding the plug, not by pulling the cable out. • If connected units are set too close to one another, the image may be affected. • Re
Streszczenie treści zawartej na stronie nr. 13
Projector + IBM PC or IBM PC compatibles Make sure that your equipment is turned off before connection. Important: • Connectors or analog RGB output adapters may be necessary depending on the personal computer connected to this projector. Please contact your dealer. • The audio input for a personal computer is the stereo mini-jack. There are some personal computers that have different types of audio outputs or none at all. Please ask your dealer for details. • For connection details, refer to t
Streszczenie treści zawartej na stronie nr. 14
Basic connections (continue) Projector + Macintosh Make sure that your equipment is turned off before connection. Important: • A monitor output adapter is necessary for a Macintosh if it has no video port. Please contact your dealer. • If you use the MAC adapter for RGB cable provided, set the dip switch to the appropriate position. See page 12. • Connectors or analog RGB output adapters may be necessary depending on the personal computer connected to this projector. Please contact your dealer.
Streszczenie treści zawartej na stronie nr. 15
To operate projector power ON Numbers 1 - 9 correspond to the instruction numbers below. 6 5 3 78 MENU SOURCE RGB-OUT LINE-OUT RGB-IN LINE-IN LAMP RGB ENTER S-VIDEO VIDEO L-AUDIO-R (MONO) INPUT 4 TEMP VIDEO CARD PC CARD VOL 2 9 1. Turn on the equipment connected to the projector. Important: • A darkened image may be seen right after pressing 2. Put the projector into standby mode by pressing the the POWER button due to warming up of this pro- main power switch. The POWER indicator lights up jec
Streszczenie treści zawartej na stronie nr. 16
To operate projector power ON (continue) AUTO POSITION button • In cases where the main power switch is acciden- When the source is selected to RGB and the image is tally turned off when either the intake/exhaust not in the right place, set to display as at the fan or the power source lamp is in operation, allow brightest signal as possible, then press the AUTO the unit to cool down for 10 minutes with the POSITION button on the remote control. If the image power turned off. Repeat step 3 when t
Streszczenie treści zawartej na stronie nr. 17
Menu operation PICTURE CONTRAST ± 10 BRIGHTNESS ± 10 COLOR TEMP STANDARD HIGH CONTRAST R ± 10 LOW CONTRAST B ± 10 USER BRIGHTNESS R ± 10 BRIGHTNESS B ± 10 TINT ± 10 COLOR ± 10 SHARPNESS ± 10 PRESENTATION ZOOM MODE 1 - 4 POSITION 1 - 4 AUTO SLIDE TIME 3 - 99sec REPEAT ON/OFF INSTALLATION IMAGE REVERSE OFF/MIRROR/INVERT/MIRROR INVERT KEYSTONE 0˚/3˚/6˚/9˚/12˚/15˚ AUTO POWER ON ON/OFF TEST SIGNAL OFF/1 - 4 OPTION SXGA PICTURE MOTION/STILL MENU POSITION UPPER LEFT/LOWER RIGHT AUTO POWER O
Streszczenie treści zawartej na stronie nr. 18
Menu setting (continue) 1 PICTURE CONTRAST ........ Adjusts the picture contrast. The contrast becomes higher as the number increases. BRIGHTNESS .... Adjusts image brightness. The image becomes brighter as the number increases. COLOR TEMP .... Adjusts color temperature. TINT .................... Adjusts the color balance in the image. The color balance of the image shifts green as the number increases and shifts to purple as the number decreases (only when NTSC or 4.43 NTSC is selected). COLOR
Streszczenie treści zawartej na stronie nr. 19
5 SIGNAL AUTO .................. Use to select AUTO, USER 1 or USER 2. HORIZ. POSITION ....Use to adjust the horizontal position of the image. VERT. POSITION .....Use to adjust the vertical position of the image. FINE SYNC. ....... Use to synchronize the projector with PC input signals so that the image is not blurred. TRACKING ......... Use to avoid image noise such as wide stripes. RGB INPUT ........ The unit adjusts itself automatically when connected to either DVD players with a component vi
Streszczenie treści zawartej na stronie nr. 20
Picture adjustment PLL in SIGNAL - USER menu. Adjustment from personal computer HOLD ...Select ON, and adjust BEGIN or END for Although this projector sets proper signal settings set image which top part is the least curved. automatically for the image signal from personal PLL .......Select FAST, NORMAL, or SLOW for computers. But at times, there can be some image which top part is the least curved. diferences in timings. In this case, press AUTO Select AUTO for normal setting. POSITION button.
