Streszczenie treści zawartej na stronie nr. 1
LCD
Projector
User Manual
X 250
S 250
MODEL LVP-X250U / LVP-S250U
EN – 1
APPENDIX ESPAÑOL ITALIANO DEUTSCH FRANÇAIS ENGLISH
Streszczenie treści zawartej na stronie nr. 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equi
Streszczenie treści zawartej na stronie nr. 3
Contents Important safeguards ...........................................................................4 Overview ............................................................................................... 6 Using the remote control ......................................................................8 Battery installation ......................................................................................................... 8 Installation ...............................................
Streszczenie treści zawartej na stronie nr. 4
Important safeguards 10. Power sources Please read all these instructions regarding your LCD This projector should be operated only from the projector and retain them for future reference. Follow type of power source indicated on the marking all warnings and instructions marked on the LCD pro- label. If you are not sure of the type of power, jector. please consult your appliance dealer or local power company. 1. Read instructions All the safety and operating instructions should 11. Power-cord pr
Streszczenie treści zawartej na stronie nr. 5
Do not turn off the main power WARNING: Unplug immediately if there is abruptly or unplug the projector something wrong with your projector. during operation. Do not operate if smoke, strange noise or odor comes It can lead to lamp breakage, fire, electric shock or out of your projector. It might cause fire or electric other trouble. shock. In this case, unplug immediately and contact your dealer. Place of installation For safety’s sake, refrain from setting the projector at Never remove the cab
Streszczenie treści zawartej na stronie nr. 6
Overview 4 65 1 Air inlet slots (Front) 7 2 Terminal board 3 Air outlet slots 4 Speaker (Left/Right) 5 Control panel 6 Remote control sensor (Front) 7 Lens 8 Remote control sensor (Rear) 3 9 Kensington Security Lock Standard 2 connector 10 Easy-carry handle 1 89 10 Control panel 1 Power button 2 – (VOLUME) button 14 13 12 3 COMPUTER button 4 MENU button LAMP TEMP 5 AUTO POSITION button 1 11 ZOOM/ 6 MUTE button FOCUS 7 Direction buttons 2 10 VOLUME 8 ENTER button COMPUTER VIDEO 9 VIDEO button 3 9
Streszczenie treści zawartej na stronie nr. 7
Bottom side 1 Release buttons (Left/Right) 1 2 Adjustment foot (Left/Right) 3 Air inlet cover (bottom) / Filter cover (For bottom air inlet slots) 4 Lamp cover 5 5 Filter cover (For front air inlet slots) 2 Caution: Do not replace the lamp right after using the projector. The lamp is very hot. 3 4 1 Power button Remote control 2 COMPUTER button 3 AUTO POSITION button 18 4 MENU button 5 RIGHT CLICK button (For mouse) MUTE 17 6 EXPAND button 1 ZOOM/ COMPUTER VIDEO 16 FOCUS 7 Wired remote control j
Streszczenie treści zawartej na stronie nr. 8
Using the remote control Battery installation Use two AA size batteries. 1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -). 3. Replace the back cover. 12 3 Important: • Do not use a new battery with an old one. • Load batteries in the correct position. • Do not heat, take apart, or throw batteries into fire. • Do not try to recharge batteri
Streszczenie treści zawartej na stronie nr. 9
Installation Orientation of the projector Picture size can be set by changing the distance between the screen and the projector. Front projection To find the approximate distance screen between the projector and screen: Multiply the width of the screen 5 1.9 (min.) , Multiply the width of the screen 5 2.4 (max.). ¥ Refer to the chart for recom- mended distances in maximum zoom and minimum zoom. (between the screen and the L head of the projector) Distance from screen (L) / (approximate) Screen
Streszczenie treści zawartej na stronie nr. 10
Basic connections This projector can be connected to equipment such as VCRs, video cameras, videodisc players, and personal com- puters having analog RGB output. Important: • Make sure that your equipment is turned off before connection. • Plug in firmly and unplug by holding the plug, not by pulling the main power cable. • If connected units are set too close to one another, the image may be affected. • Refer to the owner's guide of each component for details of connections. Projector + AV equi
Streszczenie treści zawartej na stronie nr. 11
Projector + Personal computer Connection For IBM PC or IBM PC compatibles When outputting to both a PC monitor and the projector. computer RGB cable for PC to COMPUTER OUT to PC (optional) monitor to AUDIO IN PC audio cable (optional) to PC audio output to COMPUTER IN to monitor port RGB cable for PC For Macintosh When outputting to both a PC monitor and the projector. Monitor Conversion Monitor cable adapter (optional) (optional) to PC monitor to COMPUTER OUT to AUDIO IN PC audio to PC au
Streszczenie treści zawartej na stronie nr. 12
Preparing the projector for operation Getting ready for projection Adjusting the angle of projection 1. Connect the power cord provided to the projector. For the best result, project onto a flat screen with a 90 2. Connect the power cord to the wall power outlet. degree angle to the floor. If necessary, tilt the projector 3. Remove the lens cap. by adjusting two foot adjustments on the bottom of the projector. Warning: • Do not look directly into the lens when projector is “ON”. • The lens cap i
Streszczenie treści zawartej na stronie nr. 13
To operate projector power ON REMOTE USB VIDEO 1 IN VIDEO 2 IN RS-232C COMPUTER 1 IN AUDIO 1 IN COMPUTER 2 IN AUDIO 2 IN S-VIDEO VIDEO 3 , 9 , 10 MAIN COMPUTER OUT AUDIO OUT OI MUTE AUDIO AC IN L COMPUTER ZOOM/ VIDEO FOCUS 4 R AUTO VOLME 5 , 7 AUTO POSITION POSITION button MENU LASER 6 , 8 2 , 11 LAMP TEMP 3 , 9 , 10 ZOOM/ FOCUS 5 , 7 RIGHT CLICK 6 , 8 COMPUTER VIDEO ENTER 4 4 MENU ENTER STILL button EXPAND P in P STILL AUTO MUTE POSITION MUTE AUTO POSITION button button 1. Turn on the equipme
Streszczenie treści zawartej na stronie nr. 14
To operate projector power ON (Continue) AV mute Turning off the projector Image and audio are temporarily erased with press- 9. Press the POWER button. ing the MUTE button. To restore the image and The message “POWER OFF? YES : PRESS AGAIN” audio to the normal mode, press the MUTE button appears on the screen. again. • To exit from this mode, press any button except • To prevent the damage of the LCD, the image and POWER, LASER, mouse pointer, R/L-click, audio will be restored automatically to
Streszczenie treści zawartej na stronie nr. 15
Menu operation PICTURE CONTRAST – 30 RED – 10 BRIGHTNESS – 30 GREEN – 10 COLOR MATRIX 1 BLUE – 10 2 YELLOW – 10 USER 3 CYAN – 10 USER MAGENTA – 10 OFF COLOR TEMP. 1 (Standard) CONTRAST R – 30 2 (High) CONTRAST B – 30 3 (Low) BRIGHTNESS R – 30 4 (User) BRIGHTNESS B – 30 SHARPNESS – 10 (– 2 : When the source is selected to COMPUTER) TINT – 10 (Displays only when the source is selected to VIDEO) COLOR – 10 (Displays only when the source is selected to VIDEO) AUDIO BASS 0 - 3 TREBLE 0 - 3 PinP
Streszczenie treści zawartej na stronie nr. 16
Menu operation (continued) 1 PICTURE Opt CONTRAST ........ Adjusts the picture contrast. The contrast becomes higher PICTURE as the number increases. CONTRAST 0 BRIGHTNESS .... Adjusts image brightness. The image becomes brighter as BRIGHTNESS 0 the number increases. COLOR MATRIX USER COLOR MATRIX. ...... Adjusts color balance in each color of the image. See page 18. COLOR TEMP. 1 / 2 / 3 / 4 COLOR TEMP.. .. Adjusts color temperature. See page 18. SHARPNESS 0 SHARPNESS ...... Adjusts the pictur
Streszczenie treści zawartej na stronie nr. 17
5 SIGNAL HORIZ. POSITION ....Use to adjust the horizontal position of the image. Opt VERT. POSITION .....Use to adjust the vertical position of the image. SIGNAL FINE SYNC. ....... Use to synchronize the projector with PC input signals so HORIZ. POSITION 0 that the image is not blurred. VERT. POSITION 0 TRACKING ......... Use to avoid image noise such as wide stripes. FINE SYNC. 0 COMPUTER INPUT ....The unit adjusts itself automatically when connected to TRACKING 0 either DVD players with a comp
Streszczenie treści zawartej na stronie nr. 18
Picture adjustment When using the setting which has been already Adjusting the image prepared You can adjust the picture by using the IMAGE menu. 3. Press the $ or % button to select 1, 2, or 3. EXAMPLE: USER setting of COLOR TEMP. • Select 1, 2 or 3 in the color matrix adjustment at 1. Select COLOR TEMP in IMAGE menu. your option. Selecting VIDEO input automati- 2. Press the $ or % button to select 4 2. cally selects 1 and selecting COMPUTER input automatically selects 3. 2 is recommended fo
Streszczenie treści zawartej na stronie nr. 19
Specification of RGB signals in each computer mode of the projector (For LVP-X250U) Signal mode resolution horizontal Vertical Normal mode Real mode (H x V) frequency (kHz) frequency (Hz) (H x V) (H x V) TV60 – 15.73 59.94 1024 x 768 – TV50 – 15.63 50.00 1024 x 768 – HiVision – 33.75 60.00 1024 x 576 – PC98 640 x 400 24.82 56.42 1024 x 640 640 x 400 CGA70 640 x 400 31.47 70.09 1024 x 640 640 x 400 CGA85 640 x 400 37.86 85.08 1024 x 640 640 x 400 VGA60 640 x 480 31.47 59.94 1024 x 768 640 x 480
Streszczenie treści zawartej na stronie nr. 20
Picture adjustment (continued) Specification of RGB signals in each computer mode of the projector (For LVP-S250U) Signal mode resolution horizontal Vertical Normal mode Real mode (H x V) frequency (kHz) frequency (Hz) (H x V) (H x V) TV60 – 15.73 59.94 800 x 600 – TV50 – 15.63 50.00 800 x 600 – HiVision – 33.75 60.00 800 x 450 – PC98 640 x 400 24.82 56.42 800 x 500 640 x 400 CGA70 640 x 400 31.47 70.09 800 x 500 640 x 400 CGA85 640 x 400 37.86 85.08 800 x 500 640 x 400 VGA60 640 x 480 31.47 59
