Streszczenie treści zawartej na stronie nr. 1
EN
DATA PROJECTOR
MODEL
XD110U
SD110U
User Manual
This User Manual is important to you.
Please read it before using your projector.
ENGLISH
Streszczenie treści zawartej na stronie nr. 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product’s enclosure that may be of suffcient magnitude to constitute a risk of electric shock. The exclamation point within an equ
Streszczenie treści zawartej na stronie nr. 3
Contents Important safeguards..........................................................................................................................4 Overview.............................................................................................................................................6 Remote control ...................................................................................................................................8 Installation ...................................
Streszczenie treści zawartej na stronie nr. 4
Important safeguards Please read all these instructions regarding your projector and 11. Power-cord protection retain them for future reference. Follow all warnings and Power-supply cords should be routed so that they are not instructions marked on the projector. likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at plugs, 1. Read instructions convenience receptacles, and points where they exit from All the safety and operating instr
Streszczenie treści zawartej na stronie nr. 5
Do not touch the air outlet grilles and bottom plate. WARNING: Do not touch them or put other equipment close to the air out- Unplug immediately if there is something wrong let grilles because they become hot during operation. The with your projector. heated air outlet grilles and bottom plate may cause injury or Do not operate if smoke, strange noise or odor comes out of damage to other equipment. Also, do not put the projector on a your projector. It may cause fire or electric shock. I
Streszczenie treści zawartej na stronie nr. 6
Overview 1FOCUS ring 2 3 1 2ZOOM ring 3 Control panel 4 Air outlet grille 5 Remote control sensor (Front) 6 Air inlet grille 7 Air inlet grille 8 Terminal board 9 Kensington Security Lock Standard connector 10 Air inlet grille 4 5 10 11 Speaker 11 9 8 6 7 Control panel 1 Power button 2 AUTO POSITION / button 2 3 COMPUTER / button 3 4 MENU button 8 5STATUS indicator 6 POWER indicator 7 KEYSTONE/ENTER button 7 9 8 VIDEO/ button 9 button 4 1 Important: While the menu or the screen for the key
Streszczenie treści zawartej na stronie nr. 7
Bottom side 1 Lamp cover 2 Adjustment feet Caution: Do not replace the lamp immediately after using the projector because the lamp would be extremely hot and it may cause burns. 1 2 Remote control 1 ON button 2 STILL button 14 3 AUTO POSITION button ON POWER OFF 4 ENTER button 1 13 5 MENU button STILL MUTE UP 2 6 KEYSTONE button PAGE AUTO POSITION 12 DOWN 3 7 +, - (VOLUME) buttons 4 11 8 VIDEO 1, 2 button ENTER 9 COMPUTER button 10 16 : 9 button MENU 16:9 11 Direction buttons 5 10 COMPUTER 12
Streszczenie treści zawartej na stronie nr. 8
Remote control Battery installation Use two AAA size batteries. 1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -). Load the batteries from - spring side, and make sure to set them tightly. 3. Replace the back cover. Caution: Use of a battery of wrong type may cause explosion. Only Carbon-Zinc or Alkaline-Manganese Dioxide type batteri
Streszczenie treści zawartej na stronie nr. 9
Installation Layout of the projector Image size varies depending on the distance between the screen and the projector. Front projection W A B A=B L L : Between the screen and the front edge of the projector Hd : Height of the projected image XD110U/SD110U Screen Distance from the screen : L Hd MINIMUM MAXIMUM Diagonal size Width : W Height : H Zoom (WIDE) Zoom (TELE) inch cm inch cm inch cm inch m inch m inch cm 40 102 32 81 24 61 50 1.3 61 1.5 3.5 8.8 60 152 48 122 36 91 76 1.9 91 2.3 5.2 13.3
Streszczenie treści zawartej na stronie nr. 10
Basic connections This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal computer that have analog RGB output connectors. Important: Make sure that the connected device is turned off before starting connection. Plug in the power cords of the projector and the connected devices firmly. When unplugging, hold and pull the plug. Do not pull the cord. When the projector and the connected devices are located too close to each other,
Streszczenie treści zawartej na stronie nr. 11
Projector + Computer For computer with Mini D-SUB RGB cable for PC COMPUTER IN Computer to monitor AUDIO IN AUDIO OUT port AUDIO OUT Audio cable (option) MONITOR OUTPUT MONITOR OUT Necessary when outputting to both RGB cable for PC (option) a PC monitor and the projector. to PC audio output PC audio cable (option) Important: When you use a longer RGB cable instead of the provided cable, the image may not be projected correctly. Some computers require additional connectors or analog R
Streszczenie treści zawartej na stronie nr. 12
Preparation 1. Tilt up the project to the appropriate angle. Preparation for projection 2. Press the foot adjustment buttons next to the adjustment 1. Attach the provided power cord to the projector. feet (rear), and the adjustment feet will come out. 2. Plug the power cord in the wall outlet. 3. Release the buttons to lock the adjustment feet (rear) to 3. Remove the lens cap. that position. Warning: 4. Rotate the adjustment feet (rear) for fine adjustment. Do not look into the lens
Streszczenie treści zawartej na stronie nr. 13
Basic operation 4 ON POWER OFF 3 1, 2 STILL MUTE UP 6 PAGE AUTO POSITION DOWN ENTER MENU 16:9 55 COMPUTER VIDEO 5 12 3, 1, 2 KEYSTONE VOLUME Images may not be projected with good quality in an Power-on extremely hot or cold environment. (This is not a product 1. Turn on the device connected to the projector first. malfunction.) 2. Plug the power cord in the wall outlet. 4. Adjust the focus by turning the focus ring. The POWER indicator lights up. 5. Choose your desired external input
Streszczenie treści zawartej na stronie nr. 14
Basic operation (continued) Power-off Volume from the speaker Use the following procedure to turn off the projector. Do not Press the VOLUME + or -button to change the volume turn off the projector by unplugging the power cord while the from the speaker. lamp is on. Unplugging while the lamp is on degrades the The volume control bar will appear on the screen. lamp’s performance and causes failure in the projector. 1. Press the POWER button on the control panel or the OFF VOLUME 10 butt
Streszczenie treści zawartej na stronie nr. 15
Menu operation IMAGE CONTRAST ±30 BRIGHTNESS ±30 WHITE ENHANCE AUTO, 0 - 10 COLOR TEMP . STANDARD CONTRAST R ±30 LOW CONTRAST B ±30 HIGH BRIGHTNESS R ±30 USER BRIGHTNESS B ±30 COLOR ±10 TINT *1 ±10 *1 SHARPNESS ±5 GAMMA MODE AUTO, DYNAMIC, STANDARD, THEATER INSTALLATION AUTO POWER ON ON , OFF AUTO POWER OFF OFF, 5, 10, 15, 30, 60 min SPLASH SCREEN ON , OFF BACK COLOR BLUE, BLACK LAMP MODE STANDARD, LOW IMAGE REVERSE OFF, MIRROR, INVERT, MIRROR INVERT (These items are not available when
Streszczenie treści zawartej na stronie nr. 16
Menu operation (continued) 1IMAGE CONTRAST.................................Use to adjust the image contrast. The contrast opt. XGA60 becomes higher as the value increases. IMAGE BRIGHTNESS .............................Use to adjust the image brightness. The image becomes brighter as the value increases. CONTRAST 0 BRIGHTNESS 0 WHITE ENHANCE ......................Use to adjust the white level of the projected image. Select AUTO for normal use. WHITE ENHANCE AUTO COLOR TEMP. STANDARD COLOR TEMP
Streszczenie treści zawartej na stronie nr. 17
3 FEATURE MENU POSITION ....................... Use to select the position of the menu on the screen, opt. XGA60 1. (upper left) or 2. (lower right). FEATURE CINEMA MOD............................. When AUTO is selected, the film mode will be auto- matically activated when a film source signal is input- MENU POSITION 1. ted. When OFF is selected, the film mode will not be CINEMA MODE AUTO activated. ? AUTO VIDEO SIGNAL VIDEO SIGNAL........................... When AUTO is selected, the appro
Streszczenie treści zawartej na stronie nr. 18
Image adjustment Image adjustment Color temperature You can adjust the image using the IMAGE menu. 1. Select COLOR TEMP. in the IMAGE menu. 2. Press the or button to select USER . opt. XGA60 3. Press the ENTER button. IMAGE USER CONTRAST 0 CONTRAST R 0 BRIGHTNESS 0 CONTRAST B 0 WHITE ENHANCE AUTO BRIGHTNESS R 0 COLOR TEMP. STANDARD BRIGHTNESS B 0 COLOR 0 TINT 0 4. Press the or button to select the desired item. SHARPNESS 0 5. Press the or button to adjust the selected item. GAMMA MODE A
Streszczenie treści zawartej na stronie nr. 19
Adjustment of the image from the computer Simple adjustment method This projector adjusts the format of the video signal supplied 1. Select HORIZ. POSITION in the SIGNAL menu. from the computer. However, sometimes images are not pro- 2. Press the or button to adjust the horizontal start posi- jected correctly owing to the type of the computer used. When tion (or the left side of the image). the image from the computer isn’t projected correctly, press 3. Select TRACKING in the SIGNAL menu
Streszczenie treści zawartej na stronie nr. 20
Advanced feature Still To stop the motion in the image temporarily (or to display a still image): Press the STILL button on the remote control. The image will freeze temporarily. To resume the motion in the image: Press the STILL button on the remote control again. Important: Do not display a still picture for a long time because the afterimages may persist on the screen. Page-up and page-down You can control the computer to page-up and page-down the presentation data using the rem
