Streszczenie treści zawartej na stronie nr. 1
R
LCD Projector Commercial Use
Operating Instructions
Model No. PT-P1SDU
POWER INPUT MENU
ENTER
AUTO
SETUP
STD
SHUTTER
RETURN
VOLUME
ENTER
ROTATE
Before operating this product, please read the instructions carefully and save this
manual for future use.
TQBJ 0184
ENGLISH
Streszczenie treści zawartej na stronie nr. 2
WARNING: Dear Panasonic Customer: Do not look into the lens while the projector is being used. This instruction booklet provides all the necessary operating information that B Strong light is emitted from the projector’s lens. If you look you might require. We hope it will help you to get the most out of your new directly into this light, it can hurt and damage your eyes. product, and that you will be pleased with your Panasonic LCD projector. BBe especially careful not to let young children loo
Streszczenie treści zawartej na stronie nr. 3
Contents Precautions with regard to safety guide, Returning a setting to the Preparation WARNING factory default IMPORTANT SAFETY NOTICE ...2 Adjusting the picture.................44 If you notice smoke, strange smells or noise coming from the Precautions with regard to PICTURE MODE, projector, disconnect the power cord plug from the wall outlet. safety .........................................5 DAYLIGHTVIEW, DETAILED BDo not continue to use the projector in such cases, otherwise fire or Access
Streszczenie treści zawartej na stronie nr. 4
Do not do anything that might damage the power cord or the power During a thunderstorm, do not touch the projector or the cable. cord plug. BElectric shocks can result. BDo not damage the power cord, make any modifications to it, place it near Do not use the projector in a bath or shower. any hot objects, bend it excessively, twist it, pull it, place heavy objects on BFire or electric shocks can result. top of it or wrap it into a bundle. Do not place your skin into the light beam while the proj
Streszczenie treści zawartej na stronie nr. 5
Do not place any heavy objects on top of the projector. BIt is a good idea to clean the inside of the projector before the season for BFailure to observe this may cause the projector to become unbalanced humid weather arrives. Ask your nearest Authorized Service Center to and fall, which could result in damage or injury. clean the projector when required. Please discuss with the Authorized Service Center regarding cleaning costs. Do not short-circuit, heat or disassemble the batteries or place t
Streszczenie treści zawartej na stronie nr. 6
Before use Caution when moving the projector Notes on use Be sure to check that the lens cover has been attached to the lens In order to get the best picture quality before moving the projector. Draw curtains or blinds over any windows and turn off any lights near the The projection lens is extremely susceptible to vibration and shocks. When screen to prevent outside light or light from indoor lamps from shining onto moving the projector, use the accessory softcase. When placing the projector th
Streszczenie treści zawartej na stronie nr. 7
Read this page first When you turn on the power for the first time after purchase, the HIGHLAND OTHER SETUP menu “LANGUAGE SETUP” and “OTHER SETUP” menus will be displayed. Adjust HIGHLAND OFF F F G G #Press the or button to the settings according to the place and situation where you are using the [ select an item, and then press ON projector. the I or H button to change These menus will be displayed only when you turn on the power for the
Streszczenie treści zawartej na stronie nr. 8
Location and function of each part Projector Projector # $% & , + # $ % & * ) (' ( ' #Connector panel (page 19) #Projector control panel (page 16) $Speaker $SD memory card slot %Air outlet port %Back adjustable leg (page 27) Do not cover this port. &Illumination sensor and LAMP/TEMP indicators (page 16) &Lamp unit cover (page 58) 'Remote control signal receptor (page 24) 'Front adjustable leg (page 27) (Lens cover (page 62) (Air inlet port, Air filter (pa
Streszczenie treści zawartej na stronie nr. 9
$SD operation buttons (pages 18 and 35) Projector control panel Illumination These buttons are used for operation when the SD selection screen is being sensor and displayed and when files in the SD memory card are being played back. % & #$ %POWER button (pages 26, 28 and 29) LAMP/TEMP This button is used to turn the power on and off. This button on the indicators projector illuminates red when the projector is in standby mode, and it illuminates green when a picture starts to be projected.
Streszczenie treści zawartej na stronie nr. 10
SD operation buttons Connector panel # $% & % % RETURN ENTER # # # # ROTATE & $ & $ #SD / button These buttons are used to select folders and files on the SD selection screen. ( ' Press the SD button to switch to the previous file, and the SD button to switch to the next file. You can start and stop the slide show by holding down the SD button. #PC IN connector (pages 22 and 23) $SD ENTER button
Streszczenie treści zawartej na stronie nr. 11
Setting-up Projection methods Projector position In way of installing projector, any one of the following four projection methods are used. Select whichever projection method matches the setting-up Top edge of screen method. (The projection method can be set from the “OTHER SETUP” menu. L: Projection distance Refer to page 50 for details.) Screen SH: Image height L BFront-desk projection BFront-ceiling projection SW:Image width H1: Distance from center Bottom edge of screen of lens to bottom edg
Streszczenie treści zawartej na stronie nr. 12
Connections Notes on connections Connecting to video equipment BRead the instruction manual for each peripheral device carefully before connecting it. D-sub15-pin (male) - BNCx5 (male) adapter cable BTurn off the power supply for all peripheral devices before making any connections. Red (connect to PR signal connector) BIf the cables necessary for connection are not included with the peripheral Blue (connect to PB signal connector) device or available as an option, you may need to prepare a prop
Streszczenie treści zawartej na stronie nr. 13
Preparation for the remote control unit Insert the accessory lithium battery while making sure that the polarities are correct. #While pushing the battery holder tab to the left, pull out the battery holder. Back side Push the tab Pull out $Insert the battery into the battery holder so that the + side is facing upward. Match the “+” surface of the battery with the “+” marked side of the battery holder. %Insert the battery holder. NOTE: BDo not drop the remote control unit. BKeep the remote contr
Streszczenie treści zawartej na stronie nr. 14
Turning on the power Make sure that all peripheral devices are connected properly before Press the input select button to select the turning on the power. & input signal. Power cord # Changing signals Input select button $ POWER INPUT MENU ENTER & AUTO ) BA picture will be projected in accordance with the selected input signal. SETUP ( POWER button BWhen YPBPR signals are being input to the PC IN connector using STD * SHUTTER an adapter cable, “YPBPR” will be displayed. RETURN VOLUME BIf you in
Streszczenie treści zawartej na stronie nr. 15
Turning off the power POWER button #,$ POWER INPUT MENU ENTER AUTO Direct power off function SETUP You can disconnect the power cord during projection or immediately after STD SHUTTER use and move the projector. The cooling fan will operate by the internal RETURN VOLUME power supply to cool down the lamp. ENTER B When this function is used, it may take more time for the lamp to turn back ROTATE on again compared to when the lamp cools down with the power cord connected. BDo not put the projector
Streszczenie treści zawartej na stronie nr. 16
Correcting the image position Turning off the picture and sound automatically (AUTO SETUP) momentarily (SHUTTER) This projector can adjust the position of the image and the settings for “DOT The “SHUTTER” function can be used to momentarily turn off the picture and CLOCK” and “CLOCK PHASE” when PC signals are being input. sound from the projector when the projector is not being used for short periods of time, such as during breaks in meetings or when carrying out preparation. The projector uses
Streszczenie treści zawartej na stronie nr. 17
NOTE: Using the SD memory card BWe shall not be responsible for any damage, whether direct or indirect, Information on the SD memory card (sold separately) caused by the use of or by the fault of the product. The SD memory card is a semiconductor memory with a size of 24 mm x BWe shall not be responsible for any data corruption and loss caused by 32 mm x 2.1mm, as small as a postage stamp, and is expected to be a next- the product. generation recording medium that will replace MDs (minidiscs),
Streszczenie treści zawartej na stronie nr. 18
SD selection screen This displays the counting number of the selected file. [Folder number When you insert the SD memory card into the SD memory card slot, the (three numerals)-file number (four numerals)] input signal will automatically switch to “SD” and the SD selection screen will be displayed. (An image will be played back depending on the “MODE” This displays the date when the selected file was created. setting in the “SD PICTURE SETUP” menu. Refer to page 38 for d
Streszczenie treści zawartej na stronie nr. 19
To rotate the image: %Select a file by pressing the SD or SD POWER INPUT MENU Each press of the SD ROTATE button rotates the still image being played button. BA maximum of 12 files can be displayed at a back 90 degrees clockwise. ENTER time. If there are more than 12 files, press the To display the SD selection screen: AUTO SD button when selecting the lower-right SETUP Press the SD RETURN button. file to display the next 12 (or less) files. STD BPress the SD RETURN button to return to the SHUTT
Streszczenie treści zawartej na stronie nr. 20
SLOW CHECKER MODE AUDIO About 30 seconds An image is divided into checker This sets the image which is ON pattern, and the next image appears. displayed on the screen when the The sound is played back when a NOTE: SD memory card is inserted. SLIDE IN file which contains sound is played B It may take time for the images The next image slides into the back. MODE to be displayed on the screen present image. PRESENTATION OFF depending on the images. In ADJ RETRN RANDOM such
