Streszczenie treści zawartej na stronie nr. 1
OWNER’S MANUAL
DATA PROJECTOR
TDP-MT500
Streszczenie treści zawartej na stronie nr. 2
SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is in- tended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the applian
Streszczenie treści zawartej na stronie nr. 3
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transis- torized and do
Streszczenie treści zawartej na stronie nr. 4
IMPORTANT SAFETY INSTRUCTIONS 5. Heat 8. Power-Cord Protection The product should be situated away Power-supply cords should be routed so from heat sources such as radiators, that they are not likely to be walked on heat registers, stoves, or other products or pinched by items placed upon or (including amplifiers) that produce heat. against them, paying particular attention to cords at plugs, convenience recep- tacles, and the point where they exit from the product. 6. Water and Moisture Do not
Streszczenie treści zawartej na stronie nr. 5
IMPORTANT SAFETY INSTRUCTIONS 11. Object and Liquid Entry 14. Attachments Never push objects of any kind into this Do not use attachments not recom- product through openings as they may mended by the product manufacturer as touch dangerous voltage points or short- they may cause hazards. out parts that could result in a fire or elec- tric shock. Never spill liquid of any kind on the product. 15. Accessories Do not place this product on an unstable cart, stand, tripod, bracket, or table. The prod
Streszczenie treści zawartej na stronie nr. 6
IMPORTANT SAFETY INSTRUCTIONS 16. Damage Requiring Service 18. Servicing Unplug this product from the wall outlet Do not attempt to service this product and refer servicing to qualified service yourself as opening or removing covers personnel under the following condi- may expose you to dangerous voltage tions: or other hazards. Refer all servicing to a) When the power-supply cord or plug is qualified service personnel. damaged. b) If liquid has been spilled, or objects have fallen into the prod
Streszczenie treści zawartej na stronie nr. 7
IMPORTANT SAFETY INSTRUCTIONS 21. Do not leave thermal-paper documents or easily deformed items on top of the unit or near the air exhaust. The heat from the unit could erase the information on the thermal paper, or cause deformation or warping. Also, when you touch a metal object put near the air exhaust, a burn may be caused. 22. Unplug the power plug after the projector is finished to use. Turn off POWER button to bring the pro- jector into its standby state with the light- source lamp off. T
Streszczenie treści zawartej na stronie nr. 8
POWER SUPPLY CORD SELECTION If your line voltage is 220 to 240V, use one of the following types of cable. Plug Plug configuration Plug type Line voltage configuration Plug type Line voltage Australian EURO 220 – 240V 240V 10A Switzerland 200 – 240V UK 220 – 240V 240V 6A Use a 5A fuse which is approved by ASTA North 200 – 240V or BSI to BSI362. American Always replace the fuse cover after changing 240V the fuse. 15A IMPORTANT PRECAUTIONS Save Original Packing Materials The original shipping carto
Streszczenie treści zawartej na stronie nr. 9
IMPORTANT PRECAUTIONS Avoid Volatile Liquid Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or plastic products touching the unit for a long time. They will leave marks on the finish. If cleaning with a chemically saturated cloth, be sure to follow the product’s precautions. In the spaces provided below, record the Model and Serial No. located at the bottom of your projector. Model No. Serial No. Retain this information for future reference. DECLARATION O
Streszczenie treści zawartej na stronie nr. 10
TABLE OF CONTENTS PREPARATION Checking accessories ............................................................................................................................................................ 11 Inserting the dry batteries into the remote controller ......................................................................................................... 11 Name and function of operational parts of the projector .....................................................................
Streszczenie treści zawartej na stronie nr. 11
PREPARATION Checking accessories The following accessories are provided with this projector. Check to be sure that all the accessories are packed in the package.) Power supply parts Remote controller parts Size-AAA Remote controller dry batteries (two) Power cable Conversion adaptor Personal computer parts Video parts Others • Lens cap (Attached to the main body) • Soft carrying case Mini D-SUB 15P D-SUB 9P • Operation manual • Regular user card • Warranty card • Remote controller photo-sensor
Streszczenie treści zawartej na stronie nr. 12
PREPARATION Name and function of operational parts of the projector Intake vent Operation panel Remote controller photo-sensor (Rear) 10 Angle adjusting Terminal panel button 11 Angle adjusting 11 Theft-prevention button lock hole 36 Remote controller Power cable inlet 17 Exhaust vent photo-sensor (Front) 10 Main power switch I: Turn-on Angle adjusting foot 11 O: Turn-off Focus ring: 22 Zoom ring: 18 22 18 Expands projected picture images when Adjusts focus. turned to the right (WIDE). Con
Streszczenie treści zawartej na stronie nr. 13
PREPARATION How to use remote controller Name and function of operational parts of remote controller POWER ON/OFF POWER button: 22 18 SOURCE DVI C1 C2 D SOURCE button: 18 22 COMP1 COMP2 DVI-D Selects an input video signal to be DVI S V A projected. S-VIDEO VIDEO DVI-A ASPECT button: 20 16:9 4:3 ZM 16:9 4:3 ZOOM Selects size of the video image according to REAL DYN the video signal to be projected. REAL DYNAMIC ASPECT 2 3 MEMORY (1, 2, 3) buttons: 27 1 Set the pre-stored values in the ENTER but
Streszczenie treści zawartej na stronie nr. 14
PREPARATION Operational range of remote controller Front of projector Rear of projector • Keep the remote controller photo-sensor away from the direct sun light or fluores- 30˚ 30˚ cent lamp light. 30˚ 30˚ • Keep the remote controller photo-sensor Operate the at least 2 m apart from fluorescent lamps. remote controller Otherwise, the remote controller may within a distance malfunction. of 10 m from the • If there is an inverter-operated fluores- projector, pointing cent lamp near the remote
Streszczenie treści zawartej na stronie nr. 15
SETTING UP Setting up screen Set the screen perpendicular to the projector. If the screen can not be set perpendicularly, adjust the projection angle of the projector. (See below.) • Adjust the screen or projector so that the shadow of the projector lens may be projected onto the center of the screen. • Do not place the screen where the direct sunlight and illuminating lights come onto the screen. Direct light illumination onto the screen could whiten the screen surface making the projected pict
Streszczenie treści zawartej na stronie nr. 16
SETTING UP Screen size and Projection distance Determine screen size by referring to the following table: Where the screen size is 16: 9 Where the projector is suspended from the ceiling: In the case of using suspension metal hook BR-D1208 only: B = 23 cm - 52cm In the case of using suspension metal hook BR-D1208 and high-ceiling pole BR-XL30P: B = 77 cm - 129 cm Projection distance (L) Screen size Projector Screen Screen Screen size Projector Projection distance (L) (Unit : cm) Screen size Ploj
Streszczenie treści zawartej na stronie nr. 17
SETTING UP Where the screen size is 4: 3 Where the projector is suspended from the ceiling: In the case of using suspension metal hook BR-D1208 only: B = 23 cm - 52cm In the case of using suspension metal hook BR-D1208 and high-ceiling pole BR-XL30P: B = 77 cm - 129 cm Projection distance (L) Screen size Projector Screen Screen Screen size Projector Projection distance (L) (Unit : cm) Screen size Projection distance (L) Height (A) Projection Type Height Width Min Max Tele Wide height (H) 50 76 1
Streszczenie treści zawartej na stronie nr. 18
VIEWING VIDEO IMAGES A. Connecting the projector to video equipment Preparations: • Check to be sure that the power for the projector and video equipment is turned off. 1 Connect an end of a commer- To VIDEO terminal cially available video cable to 1 VIDEO terminal of the projector. Video cable DVI VIDEO 2 Connect the other end of the COMPONENT1 Y Cb/Pb Cr/Pr To video output terminal video cable to the video output COMPONENT2 S-VIDEO RS-232C terminal of the video equipment. Video player, or the
Streszczenie treści zawartej na stronie nr. 19
VIEWING VIDEO IMAGES Connecting DVD players or BS digital tuners that have D-terminal When connecting this projector to a DVD player or BS digital tuner that has D-terminal, connect a commercially available D-RCA conversion cable to COMPONENT (1 or 2) terminal. DVD player or BS digital To audio output To audio input tuner that has D-terminal terminal terminal DVI VIDEO To D-terminal COMPONENT1 Y Cb/Pb Cr/Pr COMPONENT2 S-VIDEO RS-232C To COMPONENT (1 or 2) terminals D-RCA conversion cable (Co
Streszczenie treści zawartej na stronie nr. 20
VIEWING VIDEO IMAGES B. Plugging power cord In the case of power outlets provided with an earthing terminal inlet: Plug the attached power cable as it is. 1 Plug the attached power cable into Earthing terminal the power cable inlet of this projec- 2 1 tor. 2 Plug the other end of the power cable Power cable into a power outlet. In the case of power outlets provided with no earthing terminal inlet: 1 Plug the attached power cable into U-shaped metal the power cable inlet of this projec- 3 Power
