Streszczenie treści zawartej na stronie nr. 1
DATA PROJECTOR
MODEL
XD70U
User Manual
IMPORTANT
* DLP™ (Digital Light Processing) and DMD (Digital Micromirror Device) are registered trademarks of Texas Instru-
ments Incorporated (U.S.A.).
* DMD is an ultra-precise part developed by Texas Instruments (U.S.A.) which takes the place of liquid crystal (in the
projector).
* VGA and XGA are trademarks or registered trademarks of International Business Machines Corporation (U.S.A.).
* S-VGA is a registered trademark of Video Electronics Standards A
Streszczenie treści zawartej na stronie nr. 2
IMPORTANT SAFETY INFORMATION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exc
Streszczenie treści zawartej na stronie nr. 3
IMPORTANT SAFETY INFORMATION CAUTION Do not look at the laser pointer’s light source. Be sure to heed the following. Pointing the laser beam at This label is located on the side of the remote control. the eyes could lead to reduced vision or vision impairment. • Never look at the laser pointer’s light source. • Do not point the laser beam at people. • Do not let children use the laser pointer. E-2
Streszczenie treści zawartej na stronie nr. 4
IMPORTANT SAFETY INFORMATION Please read all these instructions regarding your projector 10. Power sources and retain them for future reference. Follow all warnings This projector should be operated only from the type and instructions marked on the projector. of power source indicated on the marking label. If you are not sure of the type of power, please consult 1. Read instructions your appliance dealer or local power company. All the safety and operating instructions should be 11. Power-cord p
Streszczenie treści zawartej na stronie nr. 5
IMPORTANT SAFETY INFORMATION Do not touch Air outlet grille and Bottom plate which WARNING: becomes hot. Unplug immediately if there is something wrong with Do not touch them or put other equipment in front of Air your projector. outlet grille. The heated Air outlet grille and Bottom plate Do not operate if smoke, strange noise or odor comes may cause injury or damage to other equipment. Also, out of your projector. It might cause fire or electric shock. do not set the projector on the desk whic
Streszczenie treści zawartej na stronie nr. 6
Major Features Lightweight high-intensity projector The synergy of the DLP™ (Digital Light Processing) display system and our own optical design serve to improve the optical utilization efficiency. The three primary colors (RGB) required in color expression are reproduced with one DMD (Digital Micromirror Device of high precision). These factors have enabled a design that offers both high intensity and small size/ lightweight features. Sharp, clear picture The DLP™ display system affords RGB
Streszczenie treści zawartej na stronie nr. 7
Table of Contents IMPORTANT SAFETY INFORMATION ................................................................................... E-1 Major Features ....................................................................................................................... E-5 Table of Contents ................................................................................................................... E-6 Checking the Supplied Accessories ......................................................
Streszczenie treści zawartej na stronie nr. 8
Table of Contents Color ...................................................................................................................................... E-46 Quick Color Adj. ........................................................................................................ E-46 Gamma ..................................................................................................................... E-46 Color Temp. ....................................................................
Streszczenie treści zawartej na stronie nr. 9
Checking the Supplied Accessories Remove the main unit and the accessories from the box and check that the following items are included. Wireless remote control unit with laser pointer [1] / S-Video cable (Mini DIN 4-pin plug, 2 m / 6.6 feet) [1] Size AAA batteries [2] This cable is used in the connection of video equipment that This controls the projector. (See Page E-12.) has an S-video connector. Connections are described on Page No. 777998012 E-18. No. 777918300 RGB signal cable Video cable
Streszczenie treści zawartej na stronie nr. 10
Checking the Supplied Accessories Storage case (for projector and accessories) [1] HOW TO PUT THE PROJECTOR INTO THE STORAGE CASE This case is designed to hold the projector itself and its Close the lens shutter or lens cap before putting the pro- accessories. jector in its case, then fasten the projector in place with the Use it when storing the projector. Velcro belt. Place the accessories in the storage pocket. No. 777919700 Velcro belt Pocket Cable storage pouch [1] User Manual (CD-ROM editi
Streszczenie treści zawartej na stronie nr. 11
Names of the Main Unit Parts Zoom ring [E-24] Focus ring [E-25] Exhaust vents Ventilation slots Remote control Adjuster button [E-25] sensor [E-13] (Also on opposite side) Lens Lens cap Remove before use. Attach the lens cap after use to protect the lens. Ventilation slots Lamp cover [E-62] Adjusters [E-25] E-10 STATUS STANDBY STANDBY AUTO SOURCE
Streszczenie treści zawartej na stronie nr. 12
STATUS STANDBY STANDBY AUTO SOURCE RGB S VIDEO VIDEO AUDIO MOUSE PC CONTROL Names of the Main Unit Parts STATUS STATUS indicator [E-21, 58] STANDBY indicator [E-21, 58] STANDBY STANDBY button [E-21] STANDBY AUTO button [E-26] AUTO SOURCE SOURCE button [E-26] Remote control sensor [E-13] AC IN connector [E-21] Speaker Built-in security slot Ventilation slots (See description below.) MOUSE connector [E-32] AUDIO connector [E-20] RGB S VIDEO VIDEO PC CONTROL AUDIO MOUSE VIDEO connector [E-18] PC CO
Streszczenie treści zawartej na stronie nr. 13
Names of the Remote Control Parts/Preparing the Remote Control LASER button [E-31] STANDBY button [E-21, 23] (Turns the laser point on and off) This button is used to switch ON the power and set the unit to the STANDBY LASER STANDBY mode. AUTO button [E-26] VIDEO RGB AUTO (Automatic adjustment of the RGB Buttons used for input selection moving image) [E-26] MENU QUICK RGB button and VIDEO button QUICK button [E-36] Q (VIDEO / S-VIDEO) (Displays a simplified menu) Buttons used for the PC mouse Bu
Streszczenie treści zawartej na stronie nr. 14
Names of the Remote Control Parts/Preparing the Remote Control Remote Control Range Point the infrared transmitter of the remote control toward the remote control sensor located at the front or rear of the main unit and operate. Reception of the remote control signal should generally be possible within the range illustrated below. Side View Top View Remote control in- frared transmitter 30° 30° Remote control in- Remote con- 30° 30° frared transmitter trol sensor 20° 20° 5m/16.4feet Remote con-
Streszczenie treści zawartej na stronie nr. 15
The Procedure Up to Projecting to the Screen Perform setup adjustments in the following order. 1 Position the projector Determine the locations to set up the screen and the projector. See “Placement Guide” on Page E-15. 2 Connect the video equipment and personal computer Connect your equipment to the projector. When making connections with the personal computer’s RGB connector, see “Connections with Personal Computer” on Page E-16. When making connections with the video equipment’s video connect
Streszczenie treści zawartej na stronie nr. 16
300" h1 250" h2 200" 180" 150" 120" 100" 80" 60" 38.4" Placement Guide • Use this information as a guide to find out about the screen size when the projector is placed at a certain location, or to find out the approximate size of a screen that will be required. • When suspending the projector from the ceiling, change the projection method. See “Vertical Flip” on E-50. Screen Size and Projection Distance • The projection distance over which focussing is adjustable is 1.20 m (3.94 feet) to 9.59 m
Streszczenie treści zawartej na stronie nr. 17
Connecting Personal Computers and Video Equipment Connecting this unit with a personal computer permits presentation data to be projected as a large screen display at conferences, lectures, and on other occasions. Furthermore, connecting this unit to a DVD player or other video equip- ment source in combination with an audio/video amplifier and speaker system will allow you to enjoy convincing home theater. Connections with Personal Computer Please check the following before making connections w
Streszczenie treści zawartej na stronie nr. 18
Connecting Personal Computers and Video Equipment To Output the External Output Signal of a Notebook Computer When projection will be with a notebook computer connected, knowledge will be required for the cable connection and notebook computer startup procedure as well as the operation that follows notebook startup. Please consult the instruction manual of your notebook computer or the on-line help while performing the following procedure. Check whether a signal is being sent from the notebook c
Streszczenie treści zawartej na stronie nr. 19
Connecting Personal Computers and Video Equipment Connections with Composite Signals Video Equipment with VIDEO Connectors • The input setting of the VIDEO connector has been set to “Auto” at the factory; however, if the projector does not project, please change the input setting to “Your Country’s Television Broadcast System” using the menu sequence of [Setup] → [Input Format] → [Video]. See “Input Format” on Page E-53. Video Equipment with S-VIDEO Connectors • Make the connection to the S-VIDE
Streszczenie treści zawartej na stronie nr. 20
Connecting Personal Computers and Video Equipment Connections with Component Signals When the Video Equipment Has a YCbCr Connector or YPbPr Connector • The projector has been set to “Auto” at the factory; however, if it does not project, please change the input setting to “Compo- nent” using the menu sequence of [Setup] → [Input Format] → [RGB]. See “Input Format” on Page E-53. • When projecting the YCbCr signal or YPbPr signal, if the color of the overall image strongly leans toward being gree
