Instrukcja obsługi InFocus SP-CEIL-004

Streszczenie treści zawartej na stronie nr. 1

• To avoid personal injury, use only an approved projector mount. Using
Hardware Description

an unauthorized projec tor mount may lead to poor ventilation and
The Digital Projector Mount utilizes the following hardware. Note that the
projector failure.

letters associated with the hardware on this list correspond to the letters
• When installing the projector mount, keep in mind that the projector’s
listed in the instructions for each installation method.
27700B S.W. Parkway Ave

Streszczenie treści zawartej na stronie nr. 2

Fixed Height Ceiling Installation Adjustable Height Ceiling Installation (H) One (1) safety screw Complete the following steps to install the projector mount and projector Complete the following steps to install the projector mount and projector on your ceiling. This installation works best with low ceilings (FIGURE 2). on your ceiling with the suspension adapter (N). This installation works best with high ceilings (FIGURE 3). Note: Look at the bottom of the swivel bracket (G) and locate

Streszczenie treści zawartej na stronie nr. 3

FIGURE 3 FIGURE 4 Wall Mount Installation Complete the following steps to install the projector mount and projector to your wall. (FIGURE 4) Note: Look at the bottom of the swivel bracket (G) and locate the arrow. Make sure you install the projector mount with the arrow pointing toward your screen. 15. Use the Allen wrench to remove the upper plate (E) from the swivel bracket (G). 16. Use the Allen wrench to remove the two screws from the enclosed end of the of