Streszczenie treści zawartej na stronie nr. 1
L53Z4/US GB 2001, 4, 2
INSTRUCTION MANUAL
VCC-4594
COLOR CCD CAMERA
About this manual
Before installing and using the camera, please read this manual
carefully. Be sure to keep it handy for later reference.
Streszczenie treści zawartej na stronie nr. 2
L53Z4/US GB 2001, 4, 2 Depending on the conditions of use, installation and environment, please be sure to make the appropriate settings and adjustments. If FEATURES you need help with installation and/or settings, please consult your dealer. The optical filter is switched automatically to color image or black and white image according to the subject brightness. Built-in interline transfer method 1/3" CCD, approx. 410,000 CONTENTS picture elements Low smear, anti-blooming, low lag, no burn
Streszczenie treści zawartej na stronie nr. 3
L53Z4/US GB 2001, 4, 2 INFORMATION TO USER This equipment has been tested and found to comply with the limits Safety Guard for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against THIS SYMBOL INDICATES THAT THERE ARE harmful interference in a residential installation. This equipment IMPORTANT OPERATING AND MAINTENANCE generates, uses, and can radiate radio frequency energy and, if INSTRUCTIONS IN THE LITERATURE ACCOMPA
Streszczenie treści zawartej na stronie nr. 4
L53Z4/US GB 2001, 4, 2 PRECAUTIONS In case of problem Protect from humidity and dust Do not use the camera if smoke or a strange odour comes from the To prevent damages to the camera, do not install it where there is unit, or if it seems not to function correctly. Disconnect the power greasy smoke or steam, where the dampness may get too high, or cord immediately, and consult your dealer (or a Sanyo Authorized where there is a lot of dust. Service Centre). Protect from high temperatures Do not o
Streszczenie treści zawartej na stronie nr. 5
L53Z4/US GB 2001, 4, 2 PARTS NAMES 1 Power indicator (POWER) Comes on when the power to the camera is on. 4 2 Video output connector (VIDEO OUT: BNC type) 1 Connect this connector to a device such as a VCR or monitor with a VIDEO IN connector. 2 3 Manual color/black and white setting terminal (CONTROL) GCB G (ground) terminal C (color) terminal 3 5 B (black and white) terminal 4 Line phase adjustment volume (LINE PHASE) When using two cameras or more, the image on the monitor may roll vert
Streszczenie treści zawartej na stronie nr. 6
L53Z4/US GB 2001, 4, 2 PARTS NAMES 8 Flange-back lock screw F 9 Lens mount cap 8 The cap is installed to protect the lens mount section. Remove the lens mount cap before installing a lens (sold separately). 9 F Flange-back adjustment lever (See page 7) G G Camera installation bracket 2 3 2 1 The bracket can be fixed at the top or bottom of the camera. When fixing the bracket, be sure to use the longer screws and install the shorter screws on the opposite side to seal the openings. 1 Shorter scre
Streszczenie treści zawartej na stronie nr. 7
L53Z4/US GB 2001, 4, 2 CONCERNING AUTO-IRIS LENSES DC type auto-iris lens A lens without amplifier circuit that operates only on a DC power source. In general, this type of lens is referred to as DC type coil lens or DC type non-amplifier lens. (Set the A.I. LENS switch to the DC position.) DC VIDEO VIDEO type auto-iris lens A. I. LENS A lens with amplifier circuit that operates on video signal and DC power source. In general, this type of lens is referred to as EE amplifier type lens. ALC and L
Streszczenie treści zawartej na stronie nr. 8
L53Z4/US GB 2001, 4, 2 FLANGE-BACK ADJUSTMENT If the pick-up surface is not correctly positioned with relation to the lens focal point, the picture will be out of focus (in particular when using auto-iris power zoom lenses, sold separately). If that is the case, adjust the flange-back position as described below. 2 1 Using a + screwdriver, loosen the flange-back lock screw (M2:+). 2 Set the zoom lens to the maximum telephoto position, set the focus using the focus ring on the lens. 3 Set the zoo
Streszczenie treści zawartej na stronie nr. 9
L53Z4/US GB 2001, 4, 2 MOUNTING THE LENS Please use a DC type auto-iris lens (sold separately). Checking the lens mount Do not use a lens if length “L” is more than 5 mm. If not, that may damage the camera and prevent proper installation. L 1 Remove the lens mount cap from the camera. 2 Install the auto-iris lens. 1 CS mount type lens Carefully align the lens mount with the camera opening, then turn the lens slowly to install it. C mount type lens C mount type lens 2 To allow for flange-back adj
Streszczenie treści zawartej na stronie nr. 10
L53Z4/US GB 2001, 4, 2 MOUNTING THE LENS Rewiring the lens cable in the lens iris plug 1 Prepare the lens cable. 1 Cut the cable at the plug, then remove approx. 8 mm of the cable sheath and strip about 2 mm from each wire. 2 Install the lens iris plug. 2 Solder the cable to the pins following the correct pin layout (refer to the table and illustrations), then close the plug cover. Pin layout DC type lenses VIDEO type lenses Brake coil (–) +12 V DC (50 mA max.) 1 2 1 2 1 Brake coil (+) Not used
Streszczenie treści zawartej na stronie nr. 11
L53Z4/US GB 2001, 4, 2 CONNECTIONS Basic connection for monitoring or recording (A) The peripheral devices (VCR, monitor, lens, etc.) and cables are sold separately. 1 1 Make the video signal connection between the camera and the monitor or time lapse VCR. 2 Connect to 24 V AC UL listed class 2 power supply. 2 CAUTION: To prevent camera and/or power supply failure, pay close attention to polarity when making the connections. To prevent fire hazard any UL listed wire rated VW-1, should be use
Streszczenie treści zawartej na stronie nr. 12
L53Z4/US GB 2001, 4, 2 SETTINGS The illustration shows the factory default settings for the switches in the camera setup section. The camera settings are described on the assumption that a DC type auto iris lens is being used. If you are using a VIDEO type auto iris lens, be sure to read the Note which is given. Furthermore, refer to the sticker on the inside of the cover for details on DIP switch positions. Control name Position 6 9 Color and Black/White level switch (C-BW) L 1 Electronic Iris
Streszczenie treści zawartej na stronie nr. 13
L53Z4/US GB 2001, 4, 2 SETTINGS Iris function setting Aperture This should normally be set to the down (AI) position. If you would like to emphasize the contours of the object, set the switch 2 (AP) to the up (SHRP) position. Use a manual or fixed iris lens and set the lens aperture to the shortest F stop. Set the switch 1 (IRIS) to the up (EI) position. 2 1 When using an auto-iris lens (for indoor/outdoor use) Set the switch 1 (IRIS) to the down (AI) position. Note: The electronic iris is s
Streszczenie treści zawartej na stronie nr. 14
L53Z4/US GB 2001, 4, 2 SETTINGS (MULTI mode: 64 sections) Backlight compensation setting This camera has two different backlight compensation functions: Normally backlight compensation switch 3 (MULT) and 4 (CENT) are set to the down (OFF) position. Change the backlight compensation switch settings 3 4 depending on the conditions. MULT mode: Use this position when applying backlight compensation to the whole of the screen. (CENT mode) CENT mode: Use this position when applying backlight comp
Streszczenie treści zawartej na stronie nr. 15
L53Z4/US GB 2001, 4, 2 SETTINGS White balance adjustment Line phase adjustment Normally the switch 5 (WB) is set to the down (ATW: auto white When using a camera switcher to connect 2 cameras or more to one balance) position and the white balance is adjusted automatically. If a monitor, there may be a vertical roll of the images when switched. In manual white balance adjustment is necessary, follow the steps below. such a case, set as described below. Set the switch 5 (WB) to the up (M: manual)
Streszczenie treści zawartej na stronie nr. 16
L53Z4/US GB 2001, 4, 2 SETTINGS Lens iris adjustment C • B/W (color/black and white) switch setting If using a DC type auto-iris lens, you will need to set the LEVEL This switch lets you select the timing of the automatic switching of (VR301) volume when shooting in the conditions described below. the optical filter to color image or black and white image, according to the subject brightness. The default setting is “L”. Set the switch VR301 according to the brightness. LEVEL C-BW H L (counterclo
Streszczenie treści zawartej na stronie nr. 17
L53Z4/US GB 2001, 4, 2 SETTINGS TROUBLESHOOTING Manual color/black and white setting Before taking the camera for repairs, please check below to make sure that the camera is used correctly. If it still does not perform Connect each pin of the CONTROL terminal as indicated below, to correctly, please consult your dealer or a Sanyo Authorized Service set the image to black and white or color as desired. Centre. Color image setting No picture on the monitor screen Connect the C (color) and the G
Streszczenie treści zawartej na stronie nr. 18
L53Z4/US GB 2001, 4, 2 SPECIFICATIONS Camera: Scanning system : NTSC standard TV system (525 TV Environmental conditions : Temperature: –10˚C ~ +50˚C lines, 30 frames/sec.) Humidity: less than 90% (no Interlace : PLL 2:1 interlace condensation) Image device : 1/3 inch solid state image device Power supply : 24 V AC, 60 Hz CCD Power consumption : 3.8 W (with auto iris lens) Picture elements : 811 (H) x 508 (V) 2.9 W (without auto iris lens) Effective picture elements : 768 (H) x 494 (V) Weight :
Streszczenie treści zawartej na stronie nr. 19
L53Z4/US GB 2001, 4, 2 SANYO INDUSTRIAL VIDEO COLOR VIDEO CAMERA LIMITED WARRANTY OBLIGATIONS In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Service Center at the user’s expense, unless specifically stated otherwise in this warranty. The names and addresses of Authorized Sanyo Service Centers may be obtained by calling the toll-free number listed below. For product operation, authorized service center referral, serv
Streszczenie treści zawartej na stronie nr. 20
L53Z4/US GB 2001, 4, 2 21605 Plummer Street, 1AC6P1P2420-- Chatsworth, California 91311 L53Z4/US(0401KP-DSP) Printed in Japan
