Instrukcja obsługi Pelco RMA14E-GY

Streszczenie treści zawartej na stronie nr. 1

®
RMA14E-BK/RMA14E-GY
Rack Mount Kit
Installation/Operation Manual
Manual C905M (2/96)
1.0 WARNINGS 2.0 SCOPE
Prior to installation and use of this product, the following The information within this manual covers the installation
WARNINGS should be observed. of the RMA14E-BK and RMA14E-GY Rack Mount Kits.
1. Installation and servicing should only be done by Installation should be in accordance with all applicable
Qualified Service and Installation Personnel. local and national electric codes, u

Streszczenie treści zawartej na stronie nr. 2

4.0 SPECIFICATIONS To install the rack kit and monitor, perform the follow- ing steps: Dimensions: See Figure 1 1. Assemble the rack as shown in Figure 2 using the Construction: 14-gauge steel supplied hardware. Finish: Black or gray polyester powder coat While assembling, install all hardware loosely un- til all components are attached and then finish by Weight: 9.31 lbs. (4.21 kg) tightening all hardware. 5.0 INSTALLATION 2. Set the monitor into the rack, aligning the four (4) feet with the

Streszczenie treści zawartej na stronie nr. 3

Figure 2. RMA14E Series Rack Kit Assembly Pelco Manual C905M (2/96) 3

Streszczenie treści zawartej na stronie nr. 4

6.0 WARRANTY AND RETURN INFORMATION WARRANTY RETURNS Pelco will repair or replace, without charge, any merchandise proved In order to expedite parts returned to the factory for repair or credit, please defective in material or workmanship for a period of one year after the date call the factory at (800) 289-9100 or (559) 292-1981 to obtain an of shipment. authorization number (CA number if returned for credit, and RA number if returned for repair). Exceptions to this warranty are as noted below: