Streszczenie treści zawartej na stronie nr. 1
R
Model SR7200 User Guide
AV Surround Receiver
Streszczenie treści zawartej na stronie nr. 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi-cient magnitude to constitute a risk of electric shock to persons. The exclamation point wit
Streszczenie treści zawartej na stronie nr. 3
IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and 11. Grounding or Polarization-This video product is equipped with a safety standards. There are, however, some installation and operation polarized alternating-current line plug (a plug having one blade precautions which you should be particularly aware of. wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you
Streszczenie treści zawartej na stronie nr. 4
19. Servicing-Do not attempt to service this video product yourself 21. Replacement Parts-When replacement parts are required, be as opening or removing covers may expose you to dangerous sure the service technician has used replacement parts specified voltage or other hazards. Refer all servicing to qualified service by the manufacturer or have the same characteristics as the personnel. original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 20. Damage Req
Streszczenie treści zawartej na stronie nr. 5
as dfghjkl¡0¡1 ¡2¡3 Y R L DIGITAL L R L R OUT IN / OUT MULTI MULTI CD Cb R L ROOM ROOM OUT L R OUT PRE FRONT CDR CDR MONI OUT FRONT MONITOR Cr / MD / MD TOR FRONT DIG - 5 IN MONITOR SPEAKER IMPEDANCE SPEAKER IMPEDANCE CTRL VCR1 VCR1 FRONT A FRONT A OR OR B, B, CENTER, CENTER, SURROUND, SURROUND, ANTENNA SURR. 1 TAPE Y OUT OUT SURR. BACK SURR. BACK : 6 : 6 - - 16 OHMS 16 OHMS OUT FRONT A FRONT A AND AND B B : 12 : 12 - - 16 OHMS 16 OHMS DIG - 4 IN CTRL DSS / DSS / SURR. TAPE
Streszczenie treści zawartej na stronie nr. 6
VIDEO SYSTEM CONNECTIONS FOR VIDEO COMPONENTS MONITOR TV AUDIO AUDIO VIDEO S-VIDEO SATELLITE TUNER or VCR2 COMPONENT S-VIDEO OUT IN OUT IN OUT IN VIDEO VIDEO IN IN IN CVBS LR LR YCbCr VCR COMPONENT AUDIO AUDIO VIDEO S-VIDEO DIGITAL VIDEO OUT IN OUT IN OUT IN OUT OUT LR LR YCbCr To household power outlet Y R L L R L R OUT DIGITAL IN / OUT MULTI MULTI CD Cb R L ROOM ROOM OUT L R OUT PRE FRONT OUT CDR CDR MONI FRONT MONITOR Cr / MD / MD TOR FRONT DIG - 5 IN MONITOR SPEAKER IMPEDA
Streszczenie treści zawartej na stronie nr. 7
AUDIO SYSTEM CONNECTIONS FOR AUDIO COMPONENTS MD PLAYER CD PLAYER OUT IN DIGITAL DIGITAL OUTPUT INPUT L L CD RECORDER SPEAKER SYSTEM A R R NORMAL INPUT SURROUND OUTPUT INVERT SPEAKER OUTPUT L DIGITAL INPUT (R) (L) R DIGITAL SUBWOOFER OUTPUT AMPLIFIER SUB (MA6100) WOOFER (R) (L) CENTER SPEAKER SPEAKER SYSTEM B AM LOOP ANTENNA AM EXTERNAL ANTENNA (R) (L) Y R L L R L R OUT DIGITAL IN / OUT MULTI MULTI CD Cb R L ROOM ROOM OUT L R OUT FRONT PRE CDR CDR MONI OUT FRONT MONITOR Cr / MD / MD TOR FRONT
Streszczenie treści zawartej na stronie nr. 8
TABLE OF CONTENTS INTRODUCTION.............................................................................................................................................................. 2 DESCRIPTION................................................................................................................................................................. 2 FEATURES .............................................................................................................................
Streszczenie treści zawartej na stronie nr. 9
ENGLISH INTRODUCTION FEATURES Thank you for purchasing the Marantz SR7200 DTS/Dolby Digital • Dolby Digital and DTS surround sound decoding, plus Dolby Pro Surround receiver. LogicII decoding, Circle Surround and a variety of additional surround modes. This remarkable component has been engineered to provide you with many years of home theater enjoyment. • 6.1 mode reproduces the original 6.1 channel soundfield by Please take a few minutes to read this manual thoroughly before you extracting the
Streszczenie treści zawartej na stronie nr. 10
i S. ( Source) DIRECT button FRONT PANEL FEATURES (SEE When this button is pressed, the tone control circuit is bypassed as well as Bass Management. PAGE iii.) Notes: The surround mode is automatically switched to AUTO when the q POWER switch and STANDBY indicator source direct function is turned on. When this switch is pressed once, the unit turns ON and display Additionally, Speaker Configurations are fixed automatically as follow. appears on the display panel. When pressed again, the unit tur
Streszczenie treści zawartej na stronie nr. 11
ENGLISH ¡1 COMPONENT VIDEO outputs REAR PANEL CONNECTIONS Connect to these outputs to the component video inputs of a video projector or monitor. When a source connected to one of the two (SEE PAGE iii.) component video inputs is selected the signal will be sent to these jacks. All connections to the rear panel should be made with the entire system powered off. To avoid errors, it is advisable to connect one cable at a time between ¡2 SPEAKER SYSTEMS A terminals the various components. FRONT L
Streszczenie treści zawartej na stronie nr. 12
™1 Video inputs Ex: TV, DVD, VCR1, and DSS/VCR2 Connect each input to the video outputs of your video source equipment. ™2 S-video inputs Ex: TV,DVD, VCR1,and DSS/VCR2 Connect each input to the S-video outputs of your video source equipment. ™3 COMPONENT VIDEO inputs Ex: DVD,and DSS/VCR2 Connect to the Y/CR/Cb component video outputs of each your video product to these jacks. ™4 AC OUTLET Connect the power cables of components such as a DVD and CD player to these outlets. Both SWITCHED and UNSWI
Streszczenie treści zawartej na stronie nr. 13
ENGLISH REMOTE CONTROL BUS CONNECTIONS This unit is equipped with a remote control function. By connecting this unit’s remote control jacks to a Marantz CD player or tape deck equipped with remote control (RC-5) jacks, it allows system remote control to operate. Connect REMOTE CONTROL OUT jack of SR7200 to REMOTE CONT. IN of other Marantz equipment, i.e. CD player or tape deck, by using an RCA pin cable. Note: If a component equipped with remote control (RC-5) jacks has an INT/EXT switch on the
Streszczenie treści zawartej na stronie nr. 14
REMOTE CONTROL UNIT RC7200SR OPERATION OF REMOTE CONTROL UNIT This chapter describes the functions which need to control the 1. Remote control SR7200. See page 19 and following pages to refer other function of The distance between the transmitter of the remote control unit and the the RC7200SR. IR SENSOR of the SR7200 should be less than about 5 meters. If the transmitter is pointed to a direction other than the IR SENSOR or if there is an obstacle between them, remote control may not be possib
Streszczenie treści zawartej na stronie nr. 15
ENGLISH SET-UP After all components are connected, initial setup must be performed. ON SCREEN DISPLAY MENU SYSTEM The SR7200 incorporates an on-screen menu system, which makes various operations possible by using the cursor (<, >, ^, v) and OK buttons on the remote controller. The settings made with these buttons are also shown in the on-screen display. OSD MAIN MENU SURROUND MODE SYSTEM SETUP 1/3 SPEAKER SETUP 1/3 SPKR SIZE CHANNEL LEVEL CONTROL SYSTEM SETUP 2/3 SPEAKER SETUP 2/3 SPKR DISTANCE
Streszczenie treści zawartej na stronie nr. 16
SYSTEM SETUP 2/3 (SELECTING THE DIGITAL INPUT) OSD MAIN MENU Five digital inputs can be assigned for the desired source. 1. Press the AMP button ,. Use this menu to determine which source is connected to which input. 2. Press OK button ⁄0 to display the “MAIN MENU” of the on-screen Example; display menu. When the digital output of a DVD player is connected to Digital 4 (input Choose a desired item in the contents with ^ or v button, and jack) of the SR7200; press the OK button to select. 1. Move
Streszczenie treści zawartej na stronie nr. 17
ENGLISH FRONT -L/R : Select the type of front speakers with < or > button. SPEAKERS SETUP CENTER : Select the type of center speaker with < or > button. The home theater system you already have installed should function SURR-L/R : Select the type of surround speakers with < or > button. provided that there are left, center and right front speakers, left and SURR.CENTER : Select the surround center speaker YES or NO with right rear/surround speakers and a subwoofer. For best results we < or > bu
Streszczenie treści zawartej na stronie nr. 18
SURROUND MODE MULTI ROOM SETUP SOURCE DIRECT : Switch the source direct ON or OFF with < or > MULTI ROOM : To switch on the Multi-room output. button. This bypasses the surround processing VIDEO : Select the video source of the Multi-room and crossover for the main speakers (front left output. and right will be full range and the subwoofer will AUDIO : Select the audio source of the Multi-room be ON) output. Note: Surround mode cannot be changed in VOLUME : Select whether the Multi-room output
Streszczenie treści zawartej na stronie nr. 19
ENGLISH 3. Recalling a Preset Station BASIC OPERATION 1. Press the F/P button !6 to change the display to preset. 2. Select the desired preset station by pressing TUNING/PRESET LISTENING TO THE TUNER or button !5 on the front panel or press CH or CH button ⁄2 on the remote. MANUAL TUNING 1. To select the tuner as the source, press the TUNER button t on Note: the front panel or press the TUNER button , on the remote To directly access the preset stations using the numeric keypad, control unit.
Streszczenie treści zawartej na stronie nr. 20
STATION NAME PRESET (on PRESET display mode) PLAYBACK OPERATION The station name preset function allows the name of each preset channel to be entered using alphanumeric characters. The Station NORMAL PLAYBACK Name button is valid only in the tuner mode. Before station name 1. Press the POWER ON button on the remote. preset operation, store stations with the preset memory operation. 2. Press the FUNCTION SELECTOR button t on the front panel or 1. Press the MEMORY button !4 on the front panel or
