Instrukcja obsługi MTX Audio ABUS-HUB4X8

Streszczenie treści zawartej na stronie nr. 1

A-BUS by MTX AUDIO products purchased in the United States from an authorized MTX dealer are guaranteed against defects in material and workmanship for a period of two
years from the date purchased by the end user, and limited to the original retail purchaser of the product. Product found to be defective during that period will be repaired or
replaced by MTX at no charge. This warranty is void if it is determined that unauthorized parties have attempted repairs or alterations of any nature. Wa

Streszczenie treści zawartej na stronie nr. 2

ABUS-HUB4X8 Multi-Source Multi-Zone Hub We hope you enjoy your ABUS system. Your ABUS component has been designed to give high quality sound and be simple and functional to operate. All ABUS products bearing the ABUS logo are made to the ABUS standard, so when you connect an ABUS input device, hub or volume control module they are compatible with each other. Some functions on some manufacturer’s products may not work with other manufacturer’s products; however, most features will be interoper

Streszczenie treści zawartej na stronie nr. 3

ABUS-VC3 Keypad Volume Control Module ABUS Compatibility The ABUS-VC3 (RJ) Keypad Volume Control Module was designed to work with in- This product complies with the A-BUS format. The A-BUS format has been adopted by telligent ABUS Multi-Source Multi-Zone Hubs using standard ABUS commands. The other manufacturers who make variety of products that can give your system added ABUS-VC3 provides the following function: flexibility. When looking to expand and/or upgrade your home entertainment system,

Streszczenie treści zawartej na stronie nr. 4

Setup Input Level Adjustments (1) - The Input Level Adjustments should all be set to the centre position to start with. If one source is louder than the other sources, turn both the Left and Right Input Level Adjustments for that source counterclockwise, reducing the input level to match the volume level of the other sources. If one source is lower than the others, turn both the Left and Right Input Level Adjustments for that source clockwise, increasing the input level to match the volume lev