Streszczenie treści zawartej na stronie nr. 1
REJ10J0037-0100(T)
M301N2T-PRB
User’s Manual
Pod probe for M16C/1N Group
Rev.1.00
Mar. 16, 2005
Streszczenie treści zawartej na stronie nr. 2
Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with ap- propriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of non- fl
Streszczenie treści zawartej na stronie nr. 3
M301N2T-PRB User’s Manual Preface Preface The M301N2T-PRB is a pod probe for the M16C/1N Group of Renesas 16-bit MCUs. The M301N2T-PRB is used by connecting to a PC4701 emulator main unit (excluding the PC4701L and PC4700L) and the M30100T3-RPD-E emulation pod main unit. This user's manual mainly describes specifications of the M301N2T-PRB pod probe and how to setup it. For details information about the emulator main unit, emulation pod main unit and emulator debugger, which are used w
Streszczenie treści zawartej na stronie nr. 4
M301N2T-PRB User’s Manual Important Important Before using this product, be sure to read this user’s manual carefully. Keep this user’s manual, and refer to this when you have questions about this product. Emulator: The emulator in this document refers to the following products that are manufactured by Renesas Technology Corp.: (1) PC4701 main unit (2) Emulation pod (3) Pod probe (4) Package converter board for connecting the user system The emulator herein does not include the
Streszczenie treści zawartej na stronie nr. 5
M301N2T-PRB User’s Manual Important Usage restrictions: This emulator has been developed as a means of supporting system development by users. Therefore, do not use it as a device used for equipment-embedded applications. Also, do not use it for developing the systems or equipment used for the following purposes either: (1) Transportation and vehicular (2) Medical (equipment where human life is concerned) (3) Aerospace (4) Nuclear power control (5) Undersea repeater If you are consid
Streszczenie treści zawartej na stronie nr. 6
M301N2T-PRB User’s Manual Precautions for Safety Precautions for Safety Definitions of Signal Words In both the user’s manual and on the product itself, several icons are used to insure proper handling of this product and also to prevent injuries to you or other persons, or damage to your properties. This chapter describes the precautions which should be taken in order to use this product safely and properly. Be sure to read this chapter before using this product. This symbol re
Streszczenie treści zawartej na stronie nr. 7
M301N2T-PRB User’s Manual Precautions for Safety 警告警告 WARNING Warnings for AC Power Supply: If the attached AC power cable does not fit the receptacle, do not alter the AC power cable and do not plug it forcibly. Failure to comply may cause electric shock and/or fire. Use an AC power cable which complies with the safety standard of the country. Do not touch the plug of the AC power cable when your hands are wet. This may cause electric shock. This product is connected sign
Streszczenie treści zawartej na stronie nr. 8
M301N2T-PRB User’s Manual Precautions for Safety 注意注意 CAUTION Cautions to Be Taken for Turning On the Power: Turn ON the power of the emulator and user system as simultaneously as possible. Turn OFF the power of the emulator and user system as simultaneously as possible. Do not leave either the emulator or user system powered on, because of leakage current the internal circuits may be damaged. When turning ON the power again after shutting OFF the power, wait about 10 seconds
Streszczenie treści zawartej na stronie nr. 9
M301N2T-PRB User’s Manual Contents Contents Page Preface................................................................................................................................................................. 3 Important .............................................................................................................................................................. 4 Precautions for Safety..............................................................................
Streszczenie treści zawartej na stronie nr. 10
M301N2T-PRB User’s Manual Contents Page 4. Hardware Specifications ................................................................................................................................ 32 4.1 Target MCU Specifications ........................................................................................................................ 32 4.2 Differences between the Actual MCU and Emulator ................................................................................. 33 Not
Streszczenie treści zawartej na stronie nr. 11
M301N2T-PRB User’s Manual Terminology Terminology Some specific words used in this user's manual are defined as follows: Emulator system This means an emulator system built around the PC4701 emulator. The PC4701 emulator system is configured with an emulator main unit, emulation pod, pod probe, host machine and emulator debugger. Emulator main unit (Hereafter PC4701) This means a generic name for emulators for M16C, 7700, 740 Families. Take note of the fact that the M301N2T-PRB (t
Streszczenie treści zawartej na stronie nr. 12
M301N2T-PRB User’s Manual 1. Outline 1. Outline This chapter describes the package components, the system configuration, the specifications of the emulator functions and the operating environment. 1.1 Package Components The M301N2T-PRB package consists of the following items. When unpacking it, check to see if your M301N2T-PRB contains all of these items. Table 1.1 Package components Item Quantity M301N2T-PRB pod probe 1 Repair request sheet (English) 1 Repair request sheet (Jap
Streszczenie treści zawartej na stronie nr. 13
M301N2T-PRB User’s Manual 1. Outline 1.3 System Configuration 1.3.1 System Configuration Figure 1.1 shows a configuration of the PC4701 system. Emulator debugger M3T-PD30 Firmware Interface cable Flexible cable Host machine (2) M30100T3-RPD-E Flexible cable (3) Emulator main unit PC4701 Interface board for connecting the pod probe (1) M301N2T-PRB (4) Pitch converter board Figure 1.1 System configuration (1) Pod probe M301N2T-PRB (this product) This pod probe is for the M16C
Streszczenie treści zawartej na stronie nr. 14
M301N2T-PRB User’s Manual 1. Outline 1.3.2 Names and Functions of the PC4701 Front Panel LEDs Figure 1.2 shows the names of the LEDs on the front panel of the emulator. Target status LED STATUS OF TARGET POWER POWER SAFE CLOCK System status LED RESET ERROR RUN STATUS OF SYSTEM HALT RESET PC4701U HIGH PERFORMANCE EMULATION BENCH Figure 1.2 Names of the LEDs on the front panel of the PC4701 (1) System Status LEDs The system status LEDs indicate the emulator PC4701's power sup
Streszczenie treści zawartej na stronie nr. 15
M301N2T-PRB User’s Manual 1. Outline (2) Target Status LEDs The target status LEDs indicate the target MCU's operating status and power supply. Table 1.4 lists the definition of each target status LED. Table 1.4 Definitions of the target status LEDs Name Status Meaning ON Power is supplied to the target MCU. POWER OFF Power is not supplied to the target MCU. ON Target MCU clock is supplied. CLOCK OFF Target MCU clock is not supplied. ON Target MCU is being reset, or reset sign
Streszczenie treści zawartej na stronie nr. 16
M301N2T-PRB User’s Manual 1. Outline 1.4 Specifications Tables 1.5 lists the specifications of the M301N2T-PRB. Table 1.5 M301N2T-PRB specification Item Desctiption Applicable MCU M16C/1N Group Evaluation MCU M301N2RGP (1 piece) Usable MCU mode Single-chip mode Applicable power supply 4.2--5.5V Operating frequency 4.2--5.5V 16MHz, 0 wait Internal oscillator circuit board (OSC-3) XIN-XOUT Switchable to external oscillator input Clock supply Internal oscillator circuit (fixed 3
Streszczenie treści zawartej na stronie nr. 17
M301N2T-PRB User’s Manual 1. Outline 1.5. Operating Environment Be sure to use this emulator with the operating environmental of the emulator and host machine listed in Tables 1.6 and 1.7. Table 1.6 Operating environmental conditions Item Description Operating temperature 5 to 35°C (no dew) Storage temperature -10 to 60°C (no dew) Table 1.7 Operating environment of the host machine Item Description Host machine IBM PC/AT compatibles Windows 98 Windows 2000 OS Windows Me W
Streszczenie treści zawartej na stronie nr. 18
M301N2T-PRB User’s Manual 2. Setup 2. Setup This chapter describes the preparation for using this product, the procedure for starting up the emulator and how to change settings. 2.1 Selecting Clock Supply 2.1.1 Clock Supply to the MCU There are two ways to supply a clock to the MCU, using the oscillator circuit of the emulation pod or using the oscillator circuit on the user system. Table 2.1 lists the factory-settings of each clock supply when you install the emulator debugger.
Streszczenie treści zawartej na stronie nr. 19
M301N2T-PRB User’s Manual 2. Setup Figure 2.1 External oscillator circuit Make note that in the oscillator circuit shown in Figure 2.2 where a resonator is connected between pins X and X , IN OUT oscillation does not occur because a flexible cable, buffer IC and other devices are used between the evaluation MCU and the user system. It is same for sub-clock oscillator circuits (X and X ). CIN COUT Figure 2.2 Circuit in which oscillation does not occur (same for X -X ) CIN
Streszczenie treści zawartej na stronie nr. 20
POR T PORT NC XC IN M301N2T-PRB User’s Manual 2. Setup 2.2 Switch Settings It is necessary to set the switches of the FLX64-PRB for debugging according to the user system. Figure 2.3 shows the positions of the switches of the FLX64-PRB, and Table 2.2 shows the switch settings. FLX64-PRB board JP1 JP2 Figure 2.3 Positions of the switches and their factory-settings Table 2.2 Switch settings of the FLX64-PRB Signal Switch Switch Setting of jumper switches PORT PORT JP1 P47/X
