Streszczenie treści zawartej na stronie nr. 1
®
RuggedSwitch
RSG2288
9-Port Modular Managed Gigabit Ethernet Switch
Installation Guide
February 15, 2011
www.ruggedcom.com
RuggedCom Inc. I 300 Applewood Crescent, Concord, Ontario, Canada L4K 5C7
Tel: +1 905 856 5288 I Fax: +1 905 856 1995 I Toll Free: 1 888 264 0006
Streszczenie treści zawartej na stronie nr. 2
Copyright COPYRIGHT © 2010 RuggedCom Inc. ALL RIGHTS RESERVED Dissemination or reproduction of this document, or evaluation and communication of its contents, is not authorized except where expressly permitted. Violations are liable for damages. All rights reserved, particularly for the purposes of patent application or trademark registration. This document contains proprietary information, which is protected by copyright. All rights are reserved. No part of this document may be photocopi
Streszczenie treści zawartej na stronie nr. 3
Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
Streszczenie treści zawartej na stronie nr. 4
Table of Contents Table of Contents Table of Contents..............................................................................................................4 Table of Figures ................................................................................................................6 Table of Tables .................................................................................................................7 1 Product Overview................................................
Streszczenie treści zawartej na stronie nr. 5
Table of Contents 4.3 IEC Environmental Type Tests........................................................................42 5 Agency Approvals ...................................................................................................43 6 Warranty..................................................................................................................43 5 ® ® RuggedCom RuggedSwitch RSG2288 Installation Guide rev103
Streszczenie treści zawartej na stronie nr. 6
Table of Figures Table of Figures Figure 1: RSG2288 Rack mount chassis orientation options – Front and rear mount....11 Figure 2: RSG2288 Ethernet Port Layout .......................................................................12 Figure 3: Ethernet panel LEDs........................................................................................12 Figure 4: 1000LX SFP (mini-GBIC) Module and LC connector ......................................13 Figure 5: 1000LX GBIC connector........
Streszczenie treści zawartej na stronie nr. 7
Table of Tables Table of Tables Table 1: Pluggable Fiber Transceiver Modules...............................................................13 Table 2: Fixed Fiber Transceivers...................................................................................14 Table 3: LED Display – Device status LED behavior definition.......................................15 Table 4: Port Status behavior definition ..........................................................................16 Table 5:
Streszczenie treści zawartej na stronie nr. 8
Product Overview 1 Product Overview 1.1 Functional Overview ® The RuggedSwitch RSG2288 is an industrially hardened, fully managed, modular, Ethernet switch specifically designed to operate reliably in electrically harsh and climatically demanding utility substation and industrial environments. The RSG2288 includes the IEEE 1588 v2 protocol with hardware time stamping allowing high precision time synchronization over the Ethernet network with accuracies of 1us or better. The RSG2288’s sup
Streszczenie treści zawartej na stronie nr. 9
Product Overview Cyber Security Features Multi-level user passwords SSH/SSL encryption MAC-based port security Selective port enable/disable Port-based network access control using IEEE 802.1x VLAN support (IEEE 802.1Q) to segregate and secure network traffic RADIUS centralized access management SNMPv3 featuring encrypted authentication and session RuggedRated™ for Reliability in Harsh Environments Immunity to EMI and heavy electrical surges o Zero-Packet-Loss™ Te
Streszczenie treści zawartej na stronie nr. 10
Product Overview Port configuration, status, statistics, mirroring, security Loss of link management on fiber ports SNTP time synchronization (both client and server) Industrial automation features (e.g. Modbus) Rugged Operating System (ROS™) Management Features Secure Web-based management interface Console menu and Command Line management interfaces via SSH, RSH, and Telnet SNMP v1, v2c, and v3 RMON (Remote MONitoring) Rich set of diagnostics with logging and alar
Streszczenie treści zawartej na stronie nr. 11
Product Overview 1.3 Mounting Flexibility The RS2000 series of products have been designed with maximum mounting and display flexibility. Customers can order an RS2000 series switch that can be mounted in a standard 19” rack, 1” DIN Rail, or directly onto a panel. For rack mount installations, the RS2000 series can be ordered with connectors on the front panel or on the rear of the chassis. Placing the connectors on the rear allows all data and power cabling to be installed and connecte
Streszczenie treści zawartej na stronie nr. 12
Product Overview 1.4 Ethernet Panel Description The Ethernet connector panel of the RSG2288 is organized into six slots, five of which are modular and may be selected at the time the unit is ordered. Figure 2 shows the physical layout of these ports. Figure 2: RSG2288 Ethernet Port Layout Slots 1, 2, 3 and 4 support two-port Ethernet modules up to 1Gbps. Slot 5 supports a one-port module up to 1Gbps. Slot 6 contains the PTP Source Card (refer to 2.9 for details) to support advanced
Streszczenie treści zawartej na stronie nr. 13
Product Overview 1.4.1 Fiber Optic Transceiver Orientation and Connection Depending on the order code of the product, the RSG2200 series products can be equipped with several different types of fiber optic ports. The Transmit (TX) and Receive (RX) connections of each port must be properly connected and matched for proper link and operation. Modules populated on the top row of the device typically have locking mechanisms or tabs facing the top of the unit. Modules located on the bottom row
Streszczenie treści zawartej na stronie nr. 14
Product Overview Figure 6 through Figure 9 show front and top views of the fixed fiber transceiver ® modules supported by RuggedSwitch . Note that when the daughter card containing transceiver modules is installed in the unit, most of the body of the module as shown in top views below will not be visible. Table 2: Fixed Fiber Transceivers Figure 7: 1000LX SC connector Figure 6: 1000LX LC connector Figure 9: 100FX MTRJ connector Figure 8: 1000LX ST connector 14 ® ® Rug
Streszczenie treści zawartej na stronie nr. 15
Product Overview 1.5 Display Panel Description RuggedCom RS2000 series products are equipped with a versatile display panel, shown in Figure 10, which is designed to provide quick status information for each port, as well as the entire device to allow for simple diagnostics and troubleshooting. It features: RS232 console port for ‘out of band’ console access and configuration Power supply and Alarm status indicators Convenient port status indicators conveying Link/Activity, Duplex,
Streszczenie treści zawartej na stronie nr. 16
Product Overview The port-based LEDs can be cycled between three display modes: Status, Duplex, and Speed. Pushing the mode button causes the display mode to be cycled. Mode Color Description Green (Solid) Link detected Status Green (Blinking) Activity Off No link Green (Solid) Full-Duplex operation Orange (Solid) Half-Duplex operation Duplex Off No link Green (Blinking) 1000Mb/s Green (Solid) 100Mb/s Speed Orange (Solid) 10Mb/s Off No link Table 4: Port Status behavior defin
Streszczenie treści zawartej na stronie nr. 17
Installation 2 Installation 2.1 Rack Mounting The RS2000 family of products can be rack mounted using the included rack mount adapter assemblies shown in Figure 11. Secure the rack mount adapter to the front side of the chassis using the included black PAN head Philips screws in the positions shown in Figure 13. The entire chassis can then be mounted to a standard 19” rack. An additional two rack mount adapters are included to optionally secure the rear of the chassis in high-vibration o
Streszczenie treści zawartej na stronie nr. 18
Installation 2.2 Panel and DIN Rail Mounting RS2000 series products can be ordered as a Panel/DIN mount chassis. Both options involve the use of the panel/DIN adapters to be mounted on each side of the chassis enclosure. The adapter allows for the chassis to be mounted on the standard 1” DIN rail using the grooves in the adapter, secured using the included Philips screw. See Figure 13 for a PANEL/DIN mount diagram. Figure 13: RSG2200 PANEL/DIN RAIL mounting diagram 18 ® ® Rugged
Streszczenie treści zawartej na stronie nr. 19
Installation 2.3 Power Supply Wiring and Grounding RS2000 series products support dual redundant power supplies – “Power Supply 1 (PS1)” and “Power Supply 2 (PS2)”. The connections for PS1, PS2 and the fail- safe relay are located on the terminal block as shown in Figure 14 and Figure 15. RSG2200 series products can be equipped with either a Philips Screw Terminal Block or a Phoenix Plug Terminal Block. The Philips Screw Terminal Block has Philips screws with a compression plate allowing e
Streszczenie treści zawartej na stronie nr. 20
Installation The RS2000 Family chassis ground connection, shown in Figure 16, uses a #6- 32 screw. It is recommended to terminate the ground connection in a #6 ring lug, and to use a torque setting not exceeding 15 in.lbs (1.7 Nm). #6-32 screw with ext. washer. #6 ring lug stainless steel standoff Figure 16: Chassis Ground Connection Terminal Description Usage Number PS1 Live / + is connected to the positive (+) terminal if the 1 PS1 Live / + power source is DC or to the (Live)
